[v4,bpf-next,3/4] selftests/bpf: make PT_REGS_* work in userspace
diff mbox series

Message ID 20190711142930.68809-4-iii@linux.ibm.com
State Accepted
Delegated to: BPF Maintainers
Headers show
Series
  • selftests/bpf: fix compiling loop{1,2,3}.c on s390
Related show

Commit Message

Ilya Leoshkevich July 11, 2019, 2:29 p.m. UTC
Right now, on certain architectures, these macros are usable only with
kernel headers. This patch makes it possible to use them with userspace
headers and, as a consequence, not only in BPF samples, but also in BPF
selftests.

On s390, provide the forward declaration of struct pt_regs and cast it
to user_pt_regs in PT_REGS_* macros. This is necessary, because instead
of the full struct pt_regs, s390 exposes only its first member
user_pt_regs to userspace, and bpf_helpers.h is used with both userspace
(in selftests) and kernel (in samples) headers. It was added in commit
466698e654e8 ("s390/bpf: correct broken uapi for
BPF_PROG_TYPE_PERF_EVENT program type").

Ditto on arm64.

On x86, provide userspace versions of PT_REGS_* macros. Unlike s390 and
arm64, x86 provides struct pt_regs to both userspace and kernel, however,
with different member names.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
---
 tools/testing/selftests/bpf/bpf_helpers.h | 75 +++++++++++++++++------
 1 file changed, 55 insertions(+), 20 deletions(-)

Comments

Andrii Nakryiko July 12, 2019, 12:49 a.m. UTC | #1
On Thu, Jul 11, 2019 at 7:31 AM Ilya Leoshkevich <iii@linux.ibm.com> wrote:
>
> Right now, on certain architectures, these macros are usable only with
> kernel headers. This patch makes it possible to use them with userspace
> headers and, as a consequence, not only in BPF samples, but also in BPF
> selftests.
>
> On s390, provide the forward declaration of struct pt_regs and cast it
> to user_pt_regs in PT_REGS_* macros. This is necessary, because instead
> of the full struct pt_regs, s390 exposes only its first member
> user_pt_regs to userspace, and bpf_helpers.h is used with both userspace
> (in selftests) and kernel (in samples) headers. It was added in commit
> 466698e654e8 ("s390/bpf: correct broken uapi for
> BPF_PROG_TYPE_PERF_EVENT program type").
>
> Ditto on arm64.
>
> On x86, provide userspace versions of PT_REGS_* macros. Unlike s390 and
> arm64, x86 provides struct pt_regs to both userspace and kernel, however,
> with different member names.
>
> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
> ---

This is great, thanks!

Acked-by: Andrii Nakryiko <andriin@fb.com>



>  tools/testing/selftests/bpf/bpf_helpers.h | 75 +++++++++++++++++------
>  1 file changed, 55 insertions(+), 20 deletions(-)
>
> diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h
> index 73071a94769a..27090d94afb6 100644

[...]

Patch
diff mbox series

diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h
index 73071a94769a..27090d94afb6 100644
--- a/tools/testing/selftests/bpf/bpf_helpers.h
+++ b/tools/testing/selftests/bpf/bpf_helpers.h
@@ -358,6 +358,7 @@  static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode,
 
 #if defined(bpf_target_x86)
 
+#ifdef __KERNEL__
 #define PT_REGS_PARM1(x) ((x)->di)
 #define PT_REGS_PARM2(x) ((x)->si)
 #define PT_REGS_PARM3(x) ((x)->dx)
@@ -368,19 +369,49 @@  static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode,
 #define PT_REGS_RC(x) ((x)->ax)
 #define PT_REGS_SP(x) ((x)->sp)
 #define PT_REGS_IP(x) ((x)->ip)
+#else
+#ifdef __i386__
+/* i386 kernel is built with -mregparm=3 */
+#define PT_REGS_PARM1(x) ((x)->eax)
+#define PT_REGS_PARM2(x) ((x)->edx)
+#define PT_REGS_PARM3(x) ((x)->ecx)
+#define PT_REGS_PARM4(x) 0
+#define PT_REGS_PARM5(x) 0
+#define PT_REGS_RET(x) ((x)->esp)
+#define PT_REGS_FP(x) ((x)->ebp)
+#define PT_REGS_RC(x) ((x)->eax)
+#define PT_REGS_SP(x) ((x)->esp)
+#define PT_REGS_IP(x) ((x)->eip)
+#else
+#define PT_REGS_PARM1(x) ((x)->rdi)
+#define PT_REGS_PARM2(x) ((x)->rsi)
+#define PT_REGS_PARM3(x) ((x)->rdx)
+#define PT_REGS_PARM4(x) ((x)->rcx)
+#define PT_REGS_PARM5(x) ((x)->r8)
+#define PT_REGS_RET(x) ((x)->rsp)
+#define PT_REGS_FP(x) ((x)->rbp)
+#define PT_REGS_RC(x) ((x)->rax)
+#define PT_REGS_SP(x) ((x)->rsp)
+#define PT_REGS_IP(x) ((x)->rip)
+#endif
+#endif
 
 #elif defined(bpf_target_s390)
 
-#define PT_REGS_PARM1(x) ((x)->gprs[2])
-#define PT_REGS_PARM2(x) ((x)->gprs[3])
-#define PT_REGS_PARM3(x) ((x)->gprs[4])
-#define PT_REGS_PARM4(x) ((x)->gprs[5])
-#define PT_REGS_PARM5(x) ((x)->gprs[6])
-#define PT_REGS_RET(x) ((x)->gprs[14])
-#define PT_REGS_FP(x) ((x)->gprs[11]) /* Works only with CONFIG_FRAME_POINTER */
-#define PT_REGS_RC(x) ((x)->gprs[2])
-#define PT_REGS_SP(x) ((x)->gprs[15])
-#define PT_REGS_IP(x) ((x)->psw.addr)
+/* s390 provides user_pt_regs instead of struct pt_regs to userspace */
+struct pt_regs;
+#define PT_REGS_S390 const volatile user_pt_regs
+#define PT_REGS_PARM1(x) (((PT_REGS_S390 *)(x))->gprs[2])
+#define PT_REGS_PARM2(x) (((PT_REGS_S390 *)(x))->gprs[3])
+#define PT_REGS_PARM3(x) (((PT_REGS_S390 *)(x))->gprs[4])
+#define PT_REGS_PARM4(x) (((PT_REGS_S390 *)(x))->gprs[5])
+#define PT_REGS_PARM5(x) (((PT_REGS_S390 *)(x))->gprs[6])
+#define PT_REGS_RET(x) (((PT_REGS_S390 *)(x))->gprs[14])
+/* Works only with CONFIG_FRAME_POINTER */
+#define PT_REGS_FP(x) (((PT_REGS_S390 *)(x))->gprs[11])
+#define PT_REGS_RC(x) (((PT_REGS_S390 *)(x))->gprs[2])
+#define PT_REGS_SP(x) (((PT_REGS_S390 *)(x))->gprs[15])
+#define PT_REGS_IP(x) (((PT_REGS_S390 *)(x))->psw.addr)
 
 #elif defined(bpf_target_arm)
 
@@ -397,16 +428,20 @@  static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode,
 
 #elif defined(bpf_target_arm64)
 
-#define PT_REGS_PARM1(x) ((x)->regs[0])
-#define PT_REGS_PARM2(x) ((x)->regs[1])
-#define PT_REGS_PARM3(x) ((x)->regs[2])
-#define PT_REGS_PARM4(x) ((x)->regs[3])
-#define PT_REGS_PARM5(x) ((x)->regs[4])
-#define PT_REGS_RET(x) ((x)->regs[30])
-#define PT_REGS_FP(x) ((x)->regs[29]) /* Works only with CONFIG_FRAME_POINTER */
-#define PT_REGS_RC(x) ((x)->regs[0])
-#define PT_REGS_SP(x) ((x)->sp)
-#define PT_REGS_IP(x) ((x)->pc)
+/* arm64 provides struct user_pt_regs instead of struct pt_regs to userspace */
+struct pt_regs;
+#define PT_REGS_ARM64 const volatile struct user_pt_regs
+#define PT_REGS_PARM1(x) (((PT_REGS_ARM64 *)(x))->regs[0])
+#define PT_REGS_PARM2(x) (((PT_REGS_ARM64 *)(x))->regs[1])
+#define PT_REGS_PARM3(x) (((PT_REGS_ARM64 *)(x))->regs[2])
+#define PT_REGS_PARM4(x) (((PT_REGS_ARM64 *)(x))->regs[3])
+#define PT_REGS_PARM5(x) (((PT_REGS_ARM64 *)(x))->regs[4])
+#define PT_REGS_RET(x) (((PT_REGS_ARM64 *)(x))->regs[30])
+/* Works only with CONFIG_FRAME_POINTER */
+#define PT_REGS_FP(x) (((PT_REGS_ARM64 *)(x))->regs[29])
+#define PT_REGS_RC(x) (((PT_REGS_ARM64 *)(x))->regs[0])
+#define PT_REGS_SP(x) (((PT_REGS_ARM64 *)(x))->sp)
+#define PT_REGS_IP(x) (((PT_REGS_ARM64 *)(x))->pc)
 
 #elif defined(bpf_target_mips)