[U-Boot] serial_lpuart: Fix config check issue when using clk driver in SPL
diff mbox series

Message ID 1562815997-9193-1-git-send-email-ye.li@nxp.com
State Accepted
Commit af325e9597dfe47943f6f3b92d0b7012317f4a53
Delegated to: Tom Rini
Headers show
Series
  • [U-Boot] serial_lpuart: Fix config check issue when using clk driver in SPL
Related show

Commit Message

Ye Li July 11, 2019, 3:33 a.m. UTC
Should use CONFIG_IS_ENABLED not IS_ENABLED for CLK driver, so it will
check the CONFIG_SPL_CLK when building SPL

Signed-off-by: Ye Li <ye.li@nxp.com>
---
 drivers/serial/serial_lpuart.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Bin Meng July 11, 2019, 4:12 a.m. UTC | #1
On Thu, Jul 11, 2019 at 11:33 AM Ye Li <ye.li@nxp.com> wrote:
>
> Should use CONFIG_IS_ENABLED not IS_ENABLED for CLK driver, so it will
> check the CONFIG_SPL_CLK when building SPL
>
> Signed-off-by: Ye Li <ye.li@nxp.com>
> ---
>  drivers/serial/serial_lpuart.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tom Rini Aug. 13, 2019, 4:52 p.m. UTC | #2
On Thu, Jul 11, 2019 at 03:33:34AM +0000, Ye Li wrote:

> Should use CONFIG_IS_ENABLED not IS_ENABLED for CLK driver, so it will
> check the CONFIG_SPL_CLK when building SPL
> 
> Signed-off-by: Ye Li <ye.li@nxp.com>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Applied to u-boot/master, thanks!

Patch
diff mbox series

diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c
index a357b00..5f6329f 100644
--- a/drivers/serial/serial_lpuart.c
+++ b/drivers/serial/serial_lpuart.c
@@ -105,7 +105,7 @@  u32 __weak get_lpuart_clk(void)
 	return CONFIG_SYS_CLK_FREQ;
 }
 
-#if IS_ENABLED(CONFIG_CLK)
+#if CONFIG_IS_ENABLED(CLK)
 static int get_lpuart_clk_rate(struct udevice *dev, u32 *clk)
 {
 	struct clk per_clk;
@@ -147,7 +147,7 @@  static void _lpuart_serial_setbrg(struct udevice *dev,
 	u16 sbr;
 	int ret;
 
-	if (IS_ENABLED(CONFIG_CLK)) {
+	if (CONFIG_IS_ENABLED(CLK)) {
 		ret = get_lpuart_clk_rate(dev, &clk);
 		if (ret)
 			return;
@@ -236,7 +236,7 @@  static void _lpuart32_serial_setbrg_7ulp(struct udevice *dev,
 	u32 clk;
 	int ret;
 
-	if (IS_ENABLED(CONFIG_CLK)) {
+	if (CONFIG_IS_ENABLED(CLK)) {
 		ret = get_lpuart_clk_rate(dev, &clk);
 		if (ret)
 			return;
@@ -305,7 +305,7 @@  static void _lpuart32_serial_setbrg(struct udevice *dev,
 	u32 sbr;
 	int ret;
 
-	if (IS_ENABLED(CONFIG_CLK)) {
+	if (CONFIG_IS_ENABLED(CLK)) {
 		ret = get_lpuart_clk_rate(dev, &clk);
 		if (ret)
 			return;