[v4,1/6] m68k: Add NeXTcube framebuffer device emulation

The NeXTcube uses a linear framebuffer with 4 greyscale colors and
a fixed resolution of 1120 * 832.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at

 https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-fb.c

and altered to fit the latest interface of the current QEMU (e.g.
the device has been "qdev"-ified etc.).

Signed-off-by: Thomas Huth <huth@tuxfamily.org>
---
 default-configs/m68k-softmmu.mak |   1 +
 hw/display/Makefile.objs         |   1 +
 hw/display/next-fb.c             | 145 +++++++++++++++++++++++++++++++
 hw/m68k/Kconfig                  |   4 +
 include/hw/m68k/next-cube.h      |   7 ++
 5 files changed, 158 insertions(+)
 create mode 100644 hw/display/next-fb.c
 create mode 100644 include/hw/m68k/next-cube.h

On 7/9/19 9:32 AM, Thomas Huth wrote:
> The NeXTcube uses a linear framebuffer with 4 greyscale colors and
> a fixed resolution of 1120 * 832.
> This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
> 
>  https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-fb.c
> 
> and altered to fit the latest interface of the current QEMU (e.g.
> the device has been "qdev"-ified etc.).
> 
> Signed-off-by: Thomas Huth <huth@tuxfamily.org>

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>

> ---
>  default-configs/m68k-softmmu.mak |   1 +
>  hw/display/Makefile.objs         |   1 +
>  hw/display/next-fb.c             | 145 +++++++++++++++++++++++++++++++
>  hw/m68k/Kconfig                  |   4 +
>  include/hw/m68k/next-cube.h      |   7 ++
>  5 files changed, 158 insertions(+)
>  create mode 100644 hw/display/next-fb.c
>  create mode 100644 include/hw/m68k/next-cube.h
> 
> diff --git a/default-configs/m68k-softmmu.mak b/default-configs/m68k-softmmu.mak
> index 4049a8f2ba..d67ab8b96d 100644
> --- a/default-configs/m68k-softmmu.mak
> +++ b/default-configs/m68k-softmmu.mak
> @@ -6,3 +6,4 @@ CONFIG_SEMIHOSTING=y
>  #
>  CONFIG_AN5206=y
>  CONFIG_MCF5208=y
> +CONFIG_NEXTCUBE=y
> diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs
> index a64998fc7b..8d1c71026d 100644
> --- a/hw/display/Makefile.objs
> +++ b/hw/display/Makefile.objs
> @@ -38,6 +38,7 @@ obj-$(CONFIG_RASPI) += bcm2835_fb.o
>  obj-$(CONFIG_SM501) += sm501.o
>  obj-$(CONFIG_TCX) += tcx.o
>  obj-$(CONFIG_CG3) += cg3.o
> +obj-$(CONFIG_NEXTCUBE) += next-fb.o
>  
>  obj-$(CONFIG_VGA) += vga.o
>  
> diff --git a/hw/display/next-fb.c b/hw/display/next-fb.c
> new file mode 100644
> index 0000000000..916a002f61
> --- /dev/null
> +++ b/hw/display/next-fb.c
> @@ -0,0 +1,145 @@
> +/*
> + * NeXT Cube/Station Framebuffer Emulation
> + *
> + * Copyright (c) 2011 Bryce Lanham
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "ui/console.h"
> +#include "hw/hw.h"
> +#include "hw/boards.h"
> +#include "hw/loader.h"
> +#include "hw/display/framebuffer.h"
> +#include "ui/pixel_ops.h"
> +#include "hw/m68k/next-cube.h"
> +
> +#define NEXTFB(obj) OBJECT_CHECK(NeXTFbState, (obj), TYPE_NEXTFB)
> +
> +struct NeXTFbState {
> +    SysBusDevice parent_obj;
> +
> +    MemoryRegion fb_mr;
> +    MemoryRegionSection fbsection;
> +    QemuConsole *con;
> +
> +    uint32_t pitch;
> +    uint32_t cols;
> +    uint32_t rows;
> +    int invalidate;
> +};
> +typedef struct NeXTFbState NeXTFbState;
> +
> +static void nextfb_draw_line(void *opaque, uint8_t *d, const uint8_t *s,
> +                             int width, int pitch)
> +{
> +    NeXTFbState *nfbstate = NEXTFB(opaque);
> +    static const uint32_t pal[4] = {
> +        0xFFFFFFFF, 0xFFAAAAAA, 0xFF555555, 0xFF000000
> +    };
> +    uint32_t *buf = (uint32_t *)d;
> +    int i = 0;
> +
> +    for (i = 0; i < nfbstate->cols / 4; i++) {
> +        int j = i * 4;
> +        uint8_t src = s[i];
> +        buf[j + 3] = pal[src & 0x3];
> +        src >>= 2;
> +        buf[j + 2] = pal[src & 0x3];
> +        src >>= 2;
> +        buf[j + 1] = pal[src & 0x3];
> +        src >>= 2;
> +        buf[j + 0] = pal[src & 0x3];
> +    }
> +}
> +
> +static void nextfb_update(void *opaque)
> +{
> +    NeXTFbState *s = NEXTFB(opaque);
> +    int dest_width = 4;
> +    int src_width;
> +    int first = 0;
> +    int last  = 0;
> +    DisplaySurface *surface = qemu_console_surface(s->con);
> +
> +    src_width = s->cols / 4 + 8;
> +    dest_width = s->cols * 4;
> +
> +    if (s->invalidate) {
> +        framebuffer_update_memory_section(&s->fbsection, &s->fb_mr, 0,
> +                                          s->cols, src_width);
> +        s->invalidate = 0;
> +    }
> +
> +    framebuffer_update_display(surface, &s->fbsection, s->cols, s->rows,
> +                               src_width, dest_width, 0, 1, nextfb_draw_line,
> +                               s, &first, &last);
> +
> +    dpy_gfx_update(s->con, 0, 0, s->cols, s->rows);
> +}
> +
> +static void nextfb_invalidate(void *opaque)
> +{
> +    NeXTFbState *s = NEXTFB(opaque);
> +    s->invalidate = 1;
> +}
> +
> +static const GraphicHwOps nextfb_ops = {
> +    .invalidate  = nextfb_invalidate,
> +    .gfx_update  = nextfb_update,
> +};
> +
> +static void nextfb_realize(DeviceState *dev, Error **errp)
> +{
> +    NeXTFbState *s = NEXTFB(dev);
> +
> +    memory_region_init_ram(&s->fb_mr, OBJECT(dev), "next-video", 0x1CB100,
> +                           &error_fatal);
> +    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->fb_mr);
> +
> +    s->invalidate = 1;
> +    s->cols = 1120;
> +    s->rows = 832;
> +
> +    s->con = graphic_console_init(dev, 0, &nextfb_ops, s);
> +    qemu_console_resize(s->con, s->cols, s->rows);
> +}
> +
> +static void nextfb_class_init(ObjectClass *oc, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(oc);
> +
> +    set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories);
> +    dc->realize = nextfb_realize;
> +}
> +
> +static const TypeInfo nextfb_info = {
> +    .name          = TYPE_NEXTFB,
> +    .parent        = TYPE_SYS_BUS_DEVICE,
> +    .instance_size = sizeof(NeXTFbState),
> +    .class_init    = nextfb_class_init,
> +};
> +
> +static void nextfb_register_types(void)
> +{
> +    type_register_static(&nextfb_info);
> +}
> +
> +type_init(nextfb_register_types)
> diff --git a/hw/m68k/Kconfig b/hw/m68k/Kconfig
> index 49ef0b3f6d..ec58a2eb06 100644
> --- a/hw/m68k/Kconfig
> +++ b/hw/m68k/Kconfig
> @@ -7,3 +7,7 @@ config MCF5208
>      bool
>      select COLDFIRE
>      select PTIMER
> +
> +config NEXTCUBE
> +    bool
> +    select FRAMEBUFFER
> diff --git a/include/hw/m68k/next-cube.h b/include/hw/m68k/next-cube.h
> new file mode 100644
> index 0000000000..090c7c51aa
> --- /dev/null
> +++ b/include/hw/m68k/next-cube.h
> @@ -0,0 +1,7 @@
> +
> +#ifndef NEXT_CUBE_H
> +#define NEXT_CUBE_H
> +
> +#define TYPE_NEXTFB "next-fb"
> +
> +#endif /* NEXT_CUBE_H */
>

On Tue, 9 Jul 2019 at 08:35, Thomas Huth <huth@tuxfamily.org> wrote:
>
> The NeXTcube uses a linear framebuffer with 4 greyscale colors and
> a fixed resolution of 1120 * 832.
> This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
>
>  https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-fb.c
>
> and altered to fit the latest interface of the current QEMU (e.g.
> the device has been "qdev"-ified etc.).
>
> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
> ---
>  default-configs/m68k-softmmu.mak |   1 +
>  hw/display/Makefile.objs         |   1 +
>  hw/display/next-fb.c             | 145 +++++++++++++++++++++++++++++++
>  hw/m68k/Kconfig                  |   4 +
>  include/hw/m68k/next-cube.h      |   7 ++
>  5 files changed, 158 insertions(+)
>  create mode 100644 hw/display/next-fb.c
>  create mode 100644 include/hw/m68k/next-cube.h
> +static void nextfb_class_init(ObjectClass *oc, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(oc);
> +
> +    set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories);
> +    dc->realize = nextfb_realize;
> +}
> +

Hi; this device seems to be missing a reset function and
also a vmsd pointer for the migration state. (If there
is in fact no migratable state, then a comment in the
class init function stating that helps to confirm that
it was not an accidental omission. Some day we might
provide some in-code way to say "has no migration state"
and then we could assert that vmsd wasn't accidentally
omitted; but we can't do that today.)

thanks
-- PMM