[v2] gpiolib: fix incorrect IRQ requesting of an active-low lineevent
diff mbox series

Message ID 20190708052308.27802-1-michael.wu@vatics.com
State New
Headers show
Series
  • [v2] gpiolib: fix incorrect IRQ requesting of an active-low lineevent
Related show

Commit Message

Michael Wu July 8, 2019, 5:23 a.m. UTC
When a pin is active-low, logical trigger edge should be inverted to match
the same interrupt opportunity.

For example, a button pushed triggers falling edge in ACTIVE_HIGH case; in
ACTIVE_LOW case, the button pushed triggers rising edge. For user space the
IRQ requesting doesn't need to do any modification except to configuring
GPIOHANDLE_REQUEST_ACTIVE_LOW.

For example, we want to catch the event when the button is pushed. The
button on the original board drives level to be low when it is pushed, and
drives level to be high when it is released.

In user space we can do:

	req.handleflags = GPIOHANDLE_REQUEST_INPUT;
	req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;

	while (1) {
		read(fd, &dat, sizeof(dat));
		if (dat.id == GPIOEVENT_EVENT_FALLING_EDGE)
			printf("button pushed\n");
	}

Run the same logic on another board which the polarity of the button is
inverted; it drives level to be high when pushed, and level to be low when
released. For this inversion we add flag GPIOHANDLE_REQUEST_ACTIVE_LOW:

	req.handleflags = GPIOHANDLE_REQUEST_INPUT |
		GPIOHANDLE_REQUEST_ACTIVE_LOW;
	req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;

At the result, there are no any events caught when the button is pushed.
By the way, button releasing will emit a "falling" event. The timing of
"falling" catching is not expected.

Cc: stable@vger.kernel.org
Signed-off-by: Michael Wu <michael.wu@vatics.com>
---
Changes from v1:
- Correct undeclared 'IRQ_TRIGGER_RISING'
- Add an example to descibe the issue
---
 drivers/gpio/gpiolib.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

Comments

Bartosz Golaszewski July 8, 2019, 8:54 a.m. UTC | #1
pon., 8 lip 2019 o 07:23 Michael Wu <michael.wu@vatics.com> napisał(a):
>
> When a pin is active-low, logical trigger edge should be inverted to match
> the same interrupt opportunity.
>
> For example, a button pushed triggers falling edge in ACTIVE_HIGH case; in
> ACTIVE_LOW case, the button pushed triggers rising edge. For user space the
> IRQ requesting doesn't need to do any modification except to configuring
> GPIOHANDLE_REQUEST_ACTIVE_LOW.
>
> For example, we want to catch the event when the button is pushed. The
> button on the original board drives level to be low when it is pushed, and
> drives level to be high when it is released.
>
> In user space we can do:
>
>         req.handleflags = GPIOHANDLE_REQUEST_INPUT;
>         req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;
>
>         while (1) {
>                 read(fd, &dat, sizeof(dat));
>                 if (dat.id == GPIOEVENT_EVENT_FALLING_EDGE)
>                         printf("button pushed\n");
>         }
>
> Run the same logic on another board which the polarity of the button is
> inverted; it drives level to be high when pushed, and level to be low when
> released. For this inversion we add flag GPIOHANDLE_REQUEST_ACTIVE_LOW:
>
>         req.handleflags = GPIOHANDLE_REQUEST_INPUT |
>                 GPIOHANDLE_REQUEST_ACTIVE_LOW;
>         req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;
>
> At the result, there are no any events caught when the button is pushed.
> By the way, button releasing will emit a "falling" event. The timing of
> "falling" catching is not expected.
>
> Cc: stable@vger.kernel.org
> Signed-off-by: Michael Wu <michael.wu@vatics.com>
> ---
> Changes from v1:
> - Correct undeclared 'IRQ_TRIGGER_RISING'
> - Add an example to descibe the issue
> ---
>  drivers/gpio/gpiolib.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index e013d417a936..9c9597f929d7 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -956,9 +956,11 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
>         }
>
>         if (eflags & GPIOEVENT_REQUEST_RISING_EDGE)
> -               irqflags |= IRQF_TRIGGER_RISING;
> +               irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
> +                       IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
>         if (eflags & GPIOEVENT_REQUEST_FALLING_EDGE)
> -               irqflags |= IRQF_TRIGGER_FALLING;
> +               irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
> +                       IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
>         irqflags |= IRQF_ONESHOT;
>
>         INIT_KFIFO(le->events);
> --
> 2.17.1
>

Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Bartosz Golaszewski July 22, 2019, 1:53 p.m. UTC | #2
pon., 8 lip 2019 o 07:23 Michael Wu <michael.wu@vatics.com> napisał(a):
>
> When a pin is active-low, logical trigger edge should be inverted to match
> the same interrupt opportunity.
>
> For example, a button pushed triggers falling edge in ACTIVE_HIGH case; in
> ACTIVE_LOW case, the button pushed triggers rising edge. For user space the
> IRQ requesting doesn't need to do any modification except to configuring
> GPIOHANDLE_REQUEST_ACTIVE_LOW.
>
> For example, we want to catch the event when the button is pushed. The
> button on the original board drives level to be low when it is pushed, and
> drives level to be high when it is released.
>
> In user space we can do:
>
>         req.handleflags = GPIOHANDLE_REQUEST_INPUT;
>         req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;
>
>         while (1) {
>                 read(fd, &dat, sizeof(dat));
>                 if (dat.id == GPIOEVENT_EVENT_FALLING_EDGE)
>                         printf("button pushed\n");
>         }
>
> Run the same logic on another board which the polarity of the button is
> inverted; it drives level to be high when pushed, and level to be low when
> released. For this inversion we add flag GPIOHANDLE_REQUEST_ACTIVE_LOW:
>
>         req.handleflags = GPIOHANDLE_REQUEST_INPUT |
>                 GPIOHANDLE_REQUEST_ACTIVE_LOW;
>         req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;
>
> At the result, there are no any events caught when the button is pushed.
> By the way, button releasing will emit a "falling" event. The timing of
> "falling" catching is not expected.
>
> Cc: stable@vger.kernel.org
> Signed-off-by: Michael Wu <michael.wu@vatics.com>
> ---
> Changes from v1:
> - Correct undeclared 'IRQ_TRIGGER_RISING'
> - Add an example to descibe the issue
> ---
>  drivers/gpio/gpiolib.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index e013d417a936..9c9597f929d7 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -956,9 +956,11 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
>         }
>
>         if (eflags & GPIOEVENT_REQUEST_RISING_EDGE)
> -               irqflags |= IRQF_TRIGGER_RISING;
> +               irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
> +                       IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
>         if (eflags & GPIOEVENT_REQUEST_FALLING_EDGE)
> -               irqflags |= IRQF_TRIGGER_FALLING;
> +               irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
> +                       IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
>         irqflags |= IRQF_ONESHOT;
>
>         INIT_KFIFO(le->events);
> --
> 2.17.1
>

Applied to fixes.

Bart

Patch
diff mbox series

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index e013d417a936..9c9597f929d7 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -956,9 +956,11 @@  static int lineevent_create(struct gpio_device *gdev, void __user *ip)
 	}
 
 	if (eflags & GPIOEVENT_REQUEST_RISING_EDGE)
-		irqflags |= IRQF_TRIGGER_RISING;
+		irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
+			IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
 	if (eflags & GPIOEVENT_REQUEST_FALLING_EDGE)
-		irqflags |= IRQF_TRIGGER_FALLING;
+		irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
+			IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
 	irqflags |= IRQF_ONESHOT;
 
 	INIT_KFIFO(le->events);