[RFC,V2,1/2] media: dt-bindings: media: i2c: Add bindings for OV02A10
diff mbox series

Message ID 20190704084651.3105-2-dongchun.zhu@mediatek.com
State Changes Requested
Headers show
Series
  • media: add support for OV02A10 sensor
Related show

Checks

Context Check Description
robh/checkpatch success

Commit Message

Dongchun Zhu July 4, 2019, 8:46 a.m. UTC
From: Dongchun Zhu <dongchun.zhu@mediatek.com>

Add device tree binding documentation for the OV02A10 camera sensor.

Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
---
 .../devicetree/bindings/media/i2c/ov02a10.txt      | 43 ++++++++++++++++++++++
 MAINTAINERS                                        |  7 ++++
 2 files changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ov02a10.txt

Comments

Rob Herring July 22, 2019, 11:49 p.m. UTC | #1
On Thu, Jul 04, 2019 at 04:46:50PM +0800, dongchun.zhu@mediatek.com wrote:
> From: Dongchun Zhu <dongchun.zhu@mediatek.com>
> 
> Add device tree binding documentation for the OV02A10 camera sensor.
> 
> Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> ---
>  .../devicetree/bindings/media/i2c/ov02a10.txt      | 43 ++++++++++++++++++++++
>  MAINTAINERS                                        |  7 ++++
>  2 files changed, 50 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov02a10.txt b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> new file mode 100644
> index 0000000..d40aa87
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> @@ -0,0 +1,43 @@
> +* Omnivision OV02A10 MIPI CSI-2 sensor
> +
> +Required Properties:
> +- compatible: shall be "ovti,ov02a10"
> +- clocks: reference to the xvclk input clock
> +- clock-names: shall be "xvclk"
> +- avdd-supply: Analog voltage supply, 2.8 volts
> +- dovdd-supply: Digital I/O voltage supply, 1.8 volts
> +- dvdd-supply: Digital core voltage supply, 1.8 volts
> +- reset-gpios: Low active reset gpio
> +
> +The device node shall contain one 'port' child node with an
> +'endpoint' subnode for its digital output video port,
> +in accordance with the video interface bindings defined in
> +Documentation/devicetree/bindings/media/video-interfaces.txt.
> +The endpoint optional property 'data-lanes' shall be "<1>".
> +
> +Example:
> +&i2c4 {
> +	ov02a10: camera-sensor@3d {
> +		compatible = "ovti,ov02a10";
> +		reg = <0x3d>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&camera_pins_cam1_mclk_on>;
> +
> +		clocks = <&topckgen CLK_TOP_MUX_CAMTG2>,
> +			<&topckgen CLK_TOP_UNIVP_192M_D8>;
> +		clock-names = "xvclk", "freq_mux";
> +
> +		avdd-supply = <&mt6358_vcama1_reg>;
> +		dvdd-supply = <&mt6358_vcn18_reg>;
> +		dovdd-supply = <&mt6358_vcamio_reg>;
> +		pwdn-gpios = <&pio 107 1>;

Not documented. If you need this, use 'powerdown-gpios' instead.

> +		reset-gpios = <&pio 109 1>;
> +
> +		port {
> +		   ov02a10_core: endpoint {
> +		       remote-endpoint = <&ov02a10_0>;
> +			   data-lanes = <1>;
> +			};
> +		};
> +	};
> +};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5cfbea4..62b81ff 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11571,6 +11571,13 @@ T:	git git://linuxtv.org/media_tree.git
>  S:	Maintained
>  F:	drivers/media/i2c/ov13858.c
>  
> +OMNIVISION OV02A10 SENSOR DRIVER
> +M:	Dongchun Zhu <dongchun.zhu@mediatek.com>
> +L:	linux-media@vger.kernel.org
> +T:	git git://linuxtv.org/media_tree.git
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> +
>  OMNIVISION OV2680 SENSOR DRIVER
>  M:	Rui Miguel Silva <rmfrfs@gmail.com>
>  L:	linux-media@vger.kernel.org
> -- 
> 2.9.2
>
Sakari Ailus July 23, 2019, 7:41 a.m. UTC | #2
Hi Dongchun,

On Thu, Jul 04, 2019 at 04:46:50PM +0800, dongchun.zhu@mediatek.com wrote:
> From: Dongchun Zhu <dongchun.zhu@mediatek.com>
> 
> Add device tree binding documentation for the OV02A10 camera sensor.
> 
> Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> ---
>  .../devicetree/bindings/media/i2c/ov02a10.txt      | 43 ++++++++++++++++++++++
>  MAINTAINERS                                        |  7 ++++
>  2 files changed, 50 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov02a10.txt b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> new file mode 100644
> index 0000000..d40aa87
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> @@ -0,0 +1,43 @@
> +* Omnivision OV02A10 MIPI CSI-2 sensor
> +
> +Required Properties:
> +- compatible: shall be "ovti,ov02a10"
> +- clocks: reference to the xvclk input clock
> +- clock-names: shall be "xvclk"
> +- avdd-supply: Analog voltage supply, 2.8 volts
> +- dovdd-supply: Digital I/O voltage supply, 1.8 volts
> +- dvdd-supply: Digital core voltage supply, 1.8 volts
> +- reset-gpios: Low active reset gpio
> +
> +The device node shall contain one 'port' child node with an
> +'endpoint' subnode for its digital output video port,
> +in accordance with the video interface bindings defined in
> +Documentation/devicetree/bindings/media/video-interfaces.txt.
> +The endpoint optional property 'data-lanes' shall be "<1>".

How many lanes does the module (or the sensor) have?

> +
> +Example:
> +&i2c4 {
> +	ov02a10: camera-sensor@3d {
> +		compatible = "ovti,ov02a10";
> +		reg = <0x3d>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&camera_pins_cam1_mclk_on>;
> +
> +		clocks = <&topckgen CLK_TOP_MUX_CAMTG2>,
> +			<&topckgen CLK_TOP_UNIVP_192M_D8>;
> +		clock-names = "xvclk", "freq_mux";
> +
> +		avdd-supply = <&mt6358_vcama1_reg>;
> +		dvdd-supply = <&mt6358_vcn18_reg>;
> +		dovdd-supply = <&mt6358_vcamio_reg>;
> +		pwdn-gpios = <&pio 107 1>;
> +		reset-gpios = <&pio 109 1>;
> +
> +		port {
> +		   ov02a10_core: endpoint {
> +		       remote-endpoint = <&ov02a10_0>;

Indentation is still wrong. :-(

> +			   data-lanes = <1>;
> +			};
> +		};
> +	};
> +};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5cfbea4..62b81ff 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11571,6 +11571,13 @@ T:	git git://linuxtv.org/media_tree.git
>  S:	Maintained
>  F:	drivers/media/i2c/ov13858.c
>  
> +OMNIVISION OV02A10 SENSOR DRIVER
> +M:	Dongchun Zhu <dongchun.zhu@mediatek.com>
> +L:	linux-media@vger.kernel.org
> +T:	git git://linuxtv.org/media_tree.git
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> +
>  OMNIVISION OV2680 SENSOR DRIVER
>  M:	Rui Miguel Silva <rmfrfs@gmail.com>
>  L:	linux-media@vger.kernel.org
Dongchun Zhu Aug. 17, 2019, 3:53 a.m. UTC | #3
Hi Sakari,

On Tue, 2019-07-23 at 10:41 +0300, Sakari Ailus wrote:
> 
> Hi Dongchun,
> 
> On Thu, Jul 04, 2019 at 04:46:50PM +0800, dongchun.zhu@mediatek.com wrote:
> > From: Dongchun Zhu <dongchun.zhu@mediatek.com>
> >
> > Add device tree binding documentation for the OV02A10 camera sensor.
> >
> > Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> > ---
> >  .../devicetree/bindings/media/i2c/ov02a10.txt      | 43 ++++++++++++++++++++++
> >  MAINTAINERS                                        |  7 ++++
> >  2 files changed, 50 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> > b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> > new file mode 100644
> > index 0000000..d40aa87
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> > @@ -0,0 +1,43 @@
> > +* Omnivision OV02A10 MIPI CSI-2 sensor
> > +
> > +Required Properties:
> > +- compatible: shall be "ovti,ov02a10"
> > +- clocks: reference to the xvclk input clock
> > +- clock-names: shall be "xvclk"
> > +- avdd-supply: Analog voltage supply, 2.8 volts
> > +- dovdd-supply: Digital I/O voltage supply, 1.8 volts
> > +- dvdd-supply: Digital core voltage supply, 1.8 volts
> > +- reset-gpios: Low active reset gpio
> > +
> > +The device node shall contain one 'port' child node with an
> > +'endpoint' subnode for its digital output video port, in accordance
> > +with the video interface bindings defined in
> > +Documentation/devicetree/bindings/media/video-interfaces.txt.
> > +The endpoint optional property 'data-lanes' shall be "<1>".
> 
> How many lanes does the module (or the sensor) have?
> 

From sensor datasheet, OV02A10 supports 1-lane MIPI interface.

> > +
> > +Example:
> > +&i2c4 {
> > +ov02a10: camera-sensor@3d {
> > +compatible = "ovti,ov02a10";
> > +reg = <0x3d>;
> > +pinctrl-names = "default";
> > +pinctrl-0 = <&camera_pins_cam1_mclk_on>;
> > +
> > +clocks = <&topckgen CLK_TOP_MUX_CAMTG2>,
> > +<&topckgen CLK_TOP_UNIVP_192M_D8>;
> > +clock-names = "xvclk", "freq_mux";
> > +
> > +avdd-supply = <&mt6358_vcama1_reg>;
> > +dvdd-supply = <&mt6358_vcn18_reg>;
> > +dovdd-supply = <&mt6358_vcamio_reg>;
> > +pwdn-gpios = <&pio 107 1>;
> > +reset-gpios = <&pio 109 1>;
> > +
> > +port {
> > +   ov02a10_core: endpoint {
> > +       remote-endpoint = <&ov02a10_0>;
> 
> Indentation is still wrong. :-(
> 

Fixed in next release.

> > +   data-lanes = <1>;
> > +};
> > +};
> > +};
> > +};
> > diff --git a/MAINTAINERS b/MAINTAINERS index 5cfbea4..62b81ff 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -11571,6 +11571,13 @@ T:git git://linuxtv.org/media_tree.git
> >  S:Maintained
> >  F:drivers/media/i2c/ov13858.c
> >
> > +OMNIVISION OV02A10 SENSOR DRIVER
> > +M:Dongchun Zhu <dongchun.zhu@mediatek.com>
> > +L:linux-media@vger.kernel.org
> > +T:git git://linuxtv.org/media_tree.git
> > +S:Maintained
> > +F:Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> > +
> >  OMNIVISION OV2680 SENSOR DRIVER
> >  M:Rui Miguel Silva <rmfrfs@gmail.com>
> >  L:linux-media@vger.kernel.org
> 
> --
> Kind regards,
> 
> Sakari Ailus
> sakari.ailus@linux.intel.com
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
> *********************MEDIATEK Confidential/Internal Use*********************
Dongchun Zhu Aug. 17, 2019, 5:03 a.m. UTC | #4
Hi Rob,

On Mon, 2019-07-22 at 18:49 -0500, Rob Herring wrote:
> 
> On Thu, Jul 04, 2019 at 04:46:50PM +0800, dongchun.zhu@mediatek.com wrote:
> > From: Dongchun Zhu <dongchun.zhu@mediatek.com>
> >
> > Add device tree binding documentation for the OV02A10 camera sensor.
> >
> > Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> > ---
> >  .../devicetree/bindings/media/i2c/ov02a10.txt      | 43 ++++++++++++++++++++++
> >  MAINTAINERS                                        |  7 ++++
> >  2 files changed, 50 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> > b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> > new file mode 100644
> > index 0000000..d40aa87
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> > @@ -0,0 +1,43 @@
> > +* Omnivision OV02A10 MIPI CSI-2 sensor
> > +
> > +Required Properties:
> > +- compatible: shall be "ovti,ov02a10"
> > +- clocks: reference to the xvclk input clock
> > +- clock-names: shall be "xvclk"
> > +- avdd-supply: Analog voltage supply, 2.8 volts
> > +- dovdd-supply: Digital I/O voltage supply, 1.8 volts
> > +- dvdd-supply: Digital core voltage supply, 1.8 volts
> > +- reset-gpios: Low active reset gpio
> > +
> > +The device node shall contain one 'port' child node with an
> > +'endpoint' subnode for its digital output video port, in accordance
> > +with the video interface bindings defined in
> > +Documentation/devicetree/bindings/media/video-interfaces.txt.
> > +The endpoint optional property 'data-lanes' shall be "<1>".
> > +
> > +Example:
> > +&i2c4 {
> > +ov02a10: camera-sensor@3d {
> > +compatible = "ovti,ov02a10";
> > +reg = <0x3d>;
> > +pinctrl-names = "default";
> > +pinctrl-0 = <&camera_pins_cam1_mclk_on>;
> > +
> > +clocks = <&topckgen CLK_TOP_MUX_CAMTG2>,
> > +<&topckgen CLK_TOP_UNIVP_192M_D8>;
> > +clock-names = "xvclk", "freq_mux";
> > +
> > +avdd-supply = <&mt6358_vcama1_reg>;
> > +dvdd-supply = <&mt6358_vcn18_reg>;
> > +dovdd-supply = <&mt6358_vcamio_reg>;
> > +pwdn-gpios = <&pio 107 1>;
> 
> Not documented. If you need this, use 'powerdown-gpios' instead.
> 

Fixed in next release.

> > +reset-gpios = <&pio 109 1>;
> > +
> > +port {
> > +   ov02a10_core: endpoint {
> > +       remote-endpoint = <&ov02a10_0>;
> > +   data-lanes = <1>;
> > +};
> > +};
> > +};
> > +};
> > diff --git a/MAINTAINERS b/MAINTAINERS index 5cfbea4..62b81ff 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -11571,6 +11571,13 @@ T:git git://linuxtv.org/media_tree.git
> >  S:Maintained
> >  F:drivers/media/i2c/ov13858.c
> >
> > +OMNIVISION OV02A10 SENSOR DRIVER
> > +M:Dongchun Zhu <dongchun.zhu@mediatek.com>
> > +L:linux-media@vger.kernel.org
> > +T:git git://linuxtv.org/media_tree.git
> > +S:Maintained
> > +F:Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> > +
> >  OMNIVISION OV2680 SENSOR DRIVER
> >  M:Rui Miguel Silva <rmfrfs@gmail.com>
> >  L:linux-media@vger.kernel.org
> > --
> > 2.9.2
> >
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
> *********************MEDIATEK Confidential/Internal Use*********************
Sakari Ailus Aug. 17, 2019, 9:32 p.m. UTC | #5
Hi Dongchun,

On Sat, Aug 17, 2019 at 11:53:05AM +0800, Dongchun Zhu wrote:
...
> > > +
> > > +The device node shall contain one 'port' child node with an
> > > +'endpoint' subnode for its digital output video port, in accordance
> > > +with the video interface bindings defined in
> > > +Documentation/devicetree/bindings/media/video-interfaces.txt.
> > > +The endpoint optional property 'data-lanes' shall be "<1>".
> > 
> > How many lanes does the module (or the sensor) have?
> > 
> 
> From sensor datasheet, OV02A10 supports 1-lane MIPI interface.

If only one lane is supported, the property should be omitted: there's
nothing that the driver needs to know here.
Dongchun Zhu Aug. 19, 2019, 5:39 a.m. UTC | #6
Hi Sakari,

On Sun, 2019-08-18 at 00:32 +0300, Sakari Ailus wrote:
> Hi Dongchun,
> 
> On Sat, Aug 17, 2019 at 11:53:05AM +0800, Dongchun Zhu wrote:
> ...
> > > > +
> > > > +The device node shall contain one 'port' child node with an
> > > > +'endpoint' subnode for its digital output video port, in accordance
> > > > +with the video interface bindings defined in
> > > > +Documentation/devicetree/bindings/media/video-interfaces.txt.
> > > > +The endpoint optional property 'data-lanes' shall be "<1>".
> > > 
> > > How many lanes does the module (or the sensor) have?
> > > 
> > 
> > From sensor datasheet, OV02A10 supports 1-lane MIPI interface.
> 
> If only one lane is supported, the property should be omitted: there's
> nothing that the driver needs to know here.
> 
Thanks for the suggestion.
But sorry that I didn't read this message this morning, so this issue
still remains unsettled in v3.
https://patchwork.kernel.org/patch/11100219/
I would fix this point in v4.

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/media/i2c/ov02a10.txt b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
new file mode 100644
index 0000000..d40aa87
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
@@ -0,0 +1,43 @@ 
+* Omnivision OV02A10 MIPI CSI-2 sensor
+
+Required Properties:
+- compatible: shall be "ovti,ov02a10"
+- clocks: reference to the xvclk input clock
+- clock-names: shall be "xvclk"
+- avdd-supply: Analog voltage supply, 2.8 volts
+- dovdd-supply: Digital I/O voltage supply, 1.8 volts
+- dvdd-supply: Digital core voltage supply, 1.8 volts
+- reset-gpios: Low active reset gpio
+
+The device node shall contain one 'port' child node with an
+'endpoint' subnode for its digital output video port,
+in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+The endpoint optional property 'data-lanes' shall be "<1>".
+
+Example:
+&i2c4 {
+	ov02a10: camera-sensor@3d {
+		compatible = "ovti,ov02a10";
+		reg = <0x3d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_pins_cam1_mclk_on>;
+
+		clocks = <&topckgen CLK_TOP_MUX_CAMTG2>,
+			<&topckgen CLK_TOP_UNIVP_192M_D8>;
+		clock-names = "xvclk", "freq_mux";
+
+		avdd-supply = <&mt6358_vcama1_reg>;
+		dvdd-supply = <&mt6358_vcn18_reg>;
+		dovdd-supply = <&mt6358_vcamio_reg>;
+		pwdn-gpios = <&pio 107 1>;
+		reset-gpios = <&pio 109 1>;
+
+		port {
+		   ov02a10_core: endpoint {
+		       remote-endpoint = <&ov02a10_0>;
+			   data-lanes = <1>;
+			};
+		};
+	};
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 5cfbea4..62b81ff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11571,6 +11571,13 @@  T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/i2c/ov13858.c
 
+OMNIVISION OV02A10 SENSOR DRIVER
+M:	Dongchun Zhu <dongchun.zhu@mediatek.com>
+L:	linux-media@vger.kernel.org
+T:	git git://linuxtv.org/media_tree.git
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/ov02a10.txt
+
 OMNIVISION OV2680 SENSOR DRIVER
 M:	Rui Miguel Silva <rmfrfs@gmail.com>
 L:	linux-media@vger.kernel.org