Message ID | 1562138144-2212-3-git-send-email-masonccyang@mxic.com.tw |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | Add Macronix raw NAND controller driver | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | success |
Hello! On 03.07.2019 10:15, Mason Yang wrote: > Document the bindings used by the Macronix raw NAND controller. > > Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> > --- > Documentation/devicetree/bindings/mtd/mxic-nand.txt | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/mxic-nand.txt > > diff --git a/Documentation/devicetree/bindings/mtd/mxic-nand.txt b/Documentation/devicetree/bindings/mtd/mxic-nand.txt > new file mode 100644 > index 0000000..ddd7660 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/mxic-nand.txt > @@ -0,0 +1,20 @@ > +Macronix Raw NAND Controller Device Tree Bindings > +------------------------------------------------- > + > +Required properties: > +- compatible: should be "macronix,nand-controller" > +- reg: should contain 1 entrie for the registers > +- interrupts: interrupt line connected to this raw NAND controller > +- clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk" > +- clocks: should contain 3 phandles for the "ps_clk", "send_clk" and > + "send_dly_clk" clocks > + > +Example: > + > + nand: mxic-nfc@43c30000 { The node names should be generic, and the DT spec 0.2 (section 2.2.2) even has documented "nand-controller", please rename. > + compatible = "macronix,nand-controller"; > + reg = <0x43c30000 0x10000>; > + reg-names = "regs"; > + clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>; > + clock-names = "send_clk", "send_dly_clk", "ps_clk"; > + }; > MBR, Sergei
Hi Sergei, > > Document the bindings used by the Macronix raw NAND controller. > > > > Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> > > --- > > Documentation/devicetree/bindings/mtd/mxic-nand.txt | 20 ++++++++++++++++++++ > > 1 file changed, 20 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/mtd/mxic-nand.txt > > > > diff --git a/Documentation/devicetree/bindings/mtd/mxic-nand.txt b/ > Documentation/devicetree/bindings/mtd/mxic-nand.txt > > new file mode 100644 > > index 0000000..ddd7660 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mtd/mxic-nand.txt > > @@ -0,0 +1,20 @@ > > +Macronix Raw NAND Controller Device Tree Bindings > > +------------------------------------------------- > > + > > +Required properties: > > +- compatible: should be "macronix,nand-controller" > > +- reg: should contain 1 entrie for the registers > > +- interrupts: interrupt line connected to this raw NAND controller > > +- clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk" > > +- clocks: should contain 3 phandles for the "ps_clk", "send_clk" and > > + "send_dly_clk" clocks > > + > > +Example: > > + > > + nand: mxic-nfc@43c30000 { > > The node names should be generic, and the DT spec 0.2 (section 2.2.2) even > has documented "nand-controller", please rename. okay, will fix it to nand: nand-controller@43c30000 { } > > > + compatible = "macronix,nand-controller"; > > + reg = <0x43c30000 0x10000>; > > + reg-names = "regs"; > > + clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>; > > + clock-names = "send_clk", "send_dly_clk", "ps_clk"; > > + }; > > > > MBR, Sergei thanks & best regards, Mason CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. ===================================================================== ============================================================================ CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. =====================================================================
On Wed, Jul 03, 2019 at 03:15:44PM +0800, Mason Yang wrote: > Document the bindings used by the Macronix raw NAND controller. > > Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> > --- > Documentation/devicetree/bindings/mtd/mxic-nand.txt | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/mxic-nand.txt > > diff --git a/Documentation/devicetree/bindings/mtd/mxic-nand.txt b/Documentation/devicetree/bindings/mtd/mxic-nand.txt > new file mode 100644 > index 0000000..ddd7660 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/mxic-nand.txt > @@ -0,0 +1,20 @@ > +Macronix Raw NAND Controller Device Tree Bindings > +------------------------------------------------- > + > +Required properties: > +- compatible: should be "macronix,nand-controller" That's not very specific. There's only 1 version of this h/w? > +- reg: should contain 1 entrie for the registers s/entrie/entry/ > +- interrupts: interrupt line connected to this raw NAND controller > +- clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk" > +- clocks: should contain 3 phandles for the "ps_clk", "send_clk" and > + "send_dly_clk" clocks You can drop '_clk' as that is redundant. > + > +Example: > + > + nand: mxic-nfc@43c30000 { > + compatible = "macronix,nand-controller"; > + reg = <0x43c30000 0x10000>; > + reg-names = "regs"; Not documented. You can drop as *-names is not generally useful when there is only 1 entry. > + clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>; > + clock-names = "send_clk", "send_dly_clk", "ps_clk"; > + }; > -- > 1.9.1 >
Hi Rob, > > Re: [PATCH v5 2/2] dt-bindings: mtd: Document Macronix raw NAND controller bindings > > On Wed, Jul 03, 2019 at 03:15:44PM +0800, Mason Yang wrote: > > Document the bindings used by the Macronix raw NAND controller. > > > > Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> > > --- > > Documentation/devicetree/bindings/mtd/mxic-nand.txt | 20 ++++++++++++++++++++ > > 1 file changed, 20 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/mtd/mxic-nand.txt > > > > diff --git a/Documentation/devicetree/bindings/mtd/mxic-nand.txt b/ > Documentation/devicetree/bindings/mtd/mxic-nand.txt > > new file mode 100644 > > index 0000000..ddd7660 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mtd/mxic-nand.txt > > @@ -0,0 +1,20 @@ > > +Macronix Raw NAND Controller Device Tree Bindings > > +------------------------------------------------- > > + > > +Required properties: > > +- compatible: should be "macronix,nand-controller" > > That's not very specific. There's only 1 version of this h/w? okay, will give it a apposite name. > > > +- reg: should contain 1 entrie for the registers > > s/entrie/entry/ will fix it. > > > +- interrupts: interrupt line connected to this raw NAND controller > > +- clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk" > > +- clocks: should contain 3 phandles for the "ps_clk", "send_clk" and > > + "send_dly_clk" clocks > > You can drop '_clk' as that is redundant. okay, got it. > > > + > > +Example: > > + > > + nand: mxic-nfc@43c30000 { > > + compatible = "macronix,nand-controller"; > > + reg = <0x43c30000 0x10000>; > > + reg-names = "regs"; > > Not documented. You can drop as *-names is not generally useful when > there is only 1 entry. okay, will fix it. > > > + clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>; > > + clock-names = "send_clk", "send_dly_clk", "ps_clk"; > > + }; > > -- > > 1.9.1 > > thanks for your time & review. best regards, Mason CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. ===================================================================== ============================================================================ CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. =====================================================================
diff --git a/Documentation/devicetree/bindings/mtd/mxic-nand.txt b/Documentation/devicetree/bindings/mtd/mxic-nand.txt new file mode 100644 index 0000000..ddd7660 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/mxic-nand.txt @@ -0,0 +1,20 @@ +Macronix Raw NAND Controller Device Tree Bindings +------------------------------------------------- + +Required properties: +- compatible: should be "macronix,nand-controller" +- reg: should contain 1 entrie for the registers +- interrupts: interrupt line connected to this raw NAND controller +- clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk" +- clocks: should contain 3 phandles for the "ps_clk", "send_clk" and + "send_dly_clk" clocks + +Example: + + nand: mxic-nfc@43c30000 { + compatible = "macronix,nand-controller"; + reg = <0x43c30000 0x10000>; + reg-names = "regs"; + clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>; + clock-names = "send_clk", "send_dly_clk", "ps_clk"; + };
Document the bindings used by the Macronix raw NAND controller. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> --- Documentation/devicetree/bindings/mtd/mxic-nand.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/mxic-nand.txt