[v2,07/11] dt-bindings: mmc: arasan: Add optional properties for Arasan SDHCI
diff mbox series

Message ID 1561958991-21935-8-git-send-email-manish.narani@xilinx.com
State Changes Requested
Headers show
Series
  • Arasan SDHCI enhancements and ZynqMP Tap Delays Handling
Related show

Checks

Context Check Description
robh/checkpatch success

Commit Message

Manish Narani July 1, 2019, 5:29 a.m. UTC
Add optional propeties for Arasan SDHCI which are used to set clk delays
for different speed modes in the controller.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 Documentation/devicetree/bindings/mmc/arasan,sdhci.txt | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

Rob Herring July 22, 2019, 10:01 p.m. UTC | #1
On Mon, Jul 01, 2019 at 10:59:47AM +0530, Manish Narani wrote:
> Add optional propeties for Arasan SDHCI which are used to set clk delays
> for different speed modes in the controller.
> 
> Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> ---
>  Documentation/devicetree/bindings/mmc/arasan,sdhci.txt | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> index 7c79496..7425d52 100644
> --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> @@ -49,6 +49,21 @@ Optional Properties:
>      properly. Test mode can be used to force the controller to function.
>    - xlnx,int-clock-stable-broken: when present, the controller always reports
>      that the internal clock is stable even when it is not.
> +  - clk-phase-legacy: Input/Output Clock Delay pair in degrees for Legacy Mode.
> +  - clk-phase-mmc-hs: Input/Output Clock Delay pair degrees for MMC HS.
> +  - clk-phase-sd-hs: Input/Output Clock Delay pair in degrees for SD HS.
> +  - clk-phase-uhs-sdr12: Input/Output Clock Delay pair in degrees for SDR12.
> +  - clk-phase-uhs-sdr25: Input/Output Clock Delay pair in degrees for SDR25.
> +  - clk-phase-uhs-sdr50: Input/Output Clock Delay pair in degrees for SDR50.
> +  - clk-phase-uhs-sdr104: Input/Output Clock Delay pair in degrees for SDR104.
> +  - clk-phase-uhs-ddr50: Input/Output Clock Delay pair in degrees for SD DDR50.
> +  - clk-phase-mmc-ddr52: Input/Output Clock Delay pair in degrees for MMC DDR52.
> +  - clk-phase-mmc-hs200: Input/Output Clock Delay pair in degrees for MMC HS200.
> +  - clk-phase-mmc-hs400: Input/Output Clock Delay pair in degrees for MMC HS400.

Either these need vendor prefixes or be added as common properties if 
that makes sense.

Rob

> +
> +  Above mentioned are the clock (phase) delays which are to be configured in the
> +  controller while switching to particular speed mode. If not specified, driver
> +  will configure the default value defined for particular mode in it.
>  
>  Example:
>  	sdhci@e0100000 {
> -- 
> 2.1.1
>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
index 7c79496..7425d52 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
@@ -49,6 +49,21 @@  Optional Properties:
     properly. Test mode can be used to force the controller to function.
   - xlnx,int-clock-stable-broken: when present, the controller always reports
     that the internal clock is stable even when it is not.
+  - clk-phase-legacy: Input/Output Clock Delay pair in degrees for Legacy Mode.
+  - clk-phase-mmc-hs: Input/Output Clock Delay pair degrees for MMC HS.
+  - clk-phase-sd-hs: Input/Output Clock Delay pair in degrees for SD HS.
+  - clk-phase-uhs-sdr12: Input/Output Clock Delay pair in degrees for SDR12.
+  - clk-phase-uhs-sdr25: Input/Output Clock Delay pair in degrees for SDR25.
+  - clk-phase-uhs-sdr50: Input/Output Clock Delay pair in degrees for SDR50.
+  - clk-phase-uhs-sdr104: Input/Output Clock Delay pair in degrees for SDR104.
+  - clk-phase-uhs-ddr50: Input/Output Clock Delay pair in degrees for SD DDR50.
+  - clk-phase-mmc-ddr52: Input/Output Clock Delay pair in degrees for MMC DDR52.
+  - clk-phase-mmc-hs200: Input/Output Clock Delay pair in degrees for MMC HS200.
+  - clk-phase-mmc-hs400: Input/Output Clock Delay pair in degrees for MMC HS400.
+
+  Above mentioned are the clock (phase) delays which are to be configured in the
+  controller while switching to particular speed mode. If not specified, driver
+  will configure the default value defined for particular mode in it.
 
 Example:
 	sdhci@e0100000 {