[PATCHv3,2/2] PCI: layerscape: Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately
diff mbox series

Message ID 20190628013826.4705-2-xiaowei.bao@nxp.com
State Changes Requested
Delegated to: Lorenzo Pieralisi
Headers show
Series
  • [PATCHv3,1/2] PCI: layerscape: Add the bar_fixed_64bit property in EP driver.
Related show

Commit Message

Xiaowei Bao June 28, 2019, 1:38 a.m. UTC
Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
---
v2:
 - No change.
v3:
 - modify the commit message.

 drivers/pci/controller/dwc/Kconfig  |   20 ++++++++++++++++++--
 drivers/pci/controller/dwc/Makefile |    3 ++-
 2 files changed, 20 insertions(+), 3 deletions(-)

Comments

Lorenzo Pieralisi Aug. 12, 2019, 10:06 a.m. UTC | #1
On Fri, Jun 28, 2019 at 09:38:26AM +0800, Xiaowei Bao wrote:
> Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately.
> 
> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> ---
> v2:
>  - No change.
> v3:
>  - modify the commit message.
> 
>  drivers/pci/controller/dwc/Kconfig  |   20 ++++++++++++++++++--
>  drivers/pci/controller/dwc/Makefile |    3 ++-
>  2 files changed, 20 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index a6ce1ee..a41ccf5 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -131,13 +131,29 @@ config PCI_KEYSTONE_EP
>  	  DesignWare core functions to implement the driver.
>  
>  config PCI_LAYERSCAPE
> -	bool "Freescale Layerscape PCIe controller"
> +	bool "Freescale Layerscape PCIe controller - Host mode"
>  	depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
>  	depends on PCI_MSI_IRQ_DOMAIN
>  	select MFD_SYSCON
>  	select PCIE_DW_HOST
>  	help
> -	  Say Y here if you want PCIe controller support on Layerscape SoCs.
> +	  Say Y here if you want to enable PCIe controller support on Layerscape
> +	  SoCs to work in Host mode.
> +	  This controller can work either as EP or RC. The RCW[HOST_AGT_PEX]

What's "The RCW" ? This entry should explain why a kernel configuration
should enable it.

Lorenzo

> +	  determines which PCIe controller works in EP mode and which PCIe
> +	  controller works in RC mode.
> +
> +config PCI_LAYERSCAPE_EP
> +	bool "Freescale Layerscape PCIe controller - Endpoint mode"
> +	depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
> +	depends on PCI_ENDPOINT
> +	select PCIE_DW_EP
> +	help
> +	  Say Y here if you want to enable PCIe controller support on Layerscape
> +	  SoCs to work in Endpoint mode.
> +	  This controller can work either as EP or RC. The RCW[HOST_AGT_PEX]
> +	  determines which PCIe controller works in EP mode and which PCIe
> +	  controller works in RC mode.
>  
>  config PCI_HISI
>  	depends on OF && (ARM64 || COMPILE_TEST)
> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> index b085dfd..824fde7 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -8,7 +8,8 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
>  obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
>  obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
>  obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
> -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
> +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> +obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
>  obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
>  obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
>  obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
> -- 
> 1.7.1
>
Xiaowei Bao Aug. 12, 2019, 10:18 a.m. UTC | #2
> -----Original Message-----
> From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Sent: 2019年8月12日 18:06
> To: Xiaowei Bao <xiaowei.bao@nxp.com>
> Cc: bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com;
> shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com;
> arnd@arndb.de; gregkh@linuxfoundation.org; M.h. Lian
> <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy Zang
> <roy.zang@nxp.com>; kstewart@linuxfoundation.org;
> pombredanne@nexb.com; shawn.lin@rock-chips.com;
> linux-pci@vger.kernel.org; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linuxppc-dev@lists.ozlabs.org
> Subject: [EXT] Re: [PATCHv3 2/2] PCI: layerscape: Add
> CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately
> 
> Caution: EXT Email
> 
> On Fri, Jun 28, 2019 at 09:38:26AM +0800, Xiaowei Bao wrote:
> > Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately.
> >
> > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > ---
> > v2:
> >  - No change.
> > v3:
> >  - modify the commit message.
> >
> >  drivers/pci/controller/dwc/Kconfig  |   20 ++++++++++++++++++--
> >  drivers/pci/controller/dwc/Makefile |    3 ++-
> >  2 files changed, 20 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/Kconfig
> > b/drivers/pci/controller/dwc/Kconfig
> > index a6ce1ee..a41ccf5 100644
> > --- a/drivers/pci/controller/dwc/Kconfig
> > +++ b/drivers/pci/controller/dwc/Kconfig
> > @@ -131,13 +131,29 @@ config PCI_KEYSTONE_EP
> >         DesignWare core functions to implement the driver.
> >
> >  config PCI_LAYERSCAPE
> > -     bool "Freescale Layerscape PCIe controller"
> > +     bool "Freescale Layerscape PCIe controller - Host mode"
> >       depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
> >       depends on PCI_MSI_IRQ_DOMAIN
> >       select MFD_SYSCON
> >       select PCIE_DW_HOST
> >       help
> > -       Say Y here if you want PCIe controller support on Layerscape SoCs.
> > +       Say Y here if you want to enable PCIe controller support on
> Layerscape
> > +       SoCs to work in Host mode.
> > +       This controller can work either as EP or RC. The
> > + RCW[HOST_AGT_PEX]
> 
> What's "The RCW" ? This entry should explain why a kernel configuration
> should enable it.
[Xiaowei Bao] Hi Lorenzo, the RCW full name is "reset configuration word", it can be built to a bin file and program to the flash, rather than configure by kernel, almost the NXP Layerscaple platform use this way.
> 
> Lorenzo
> 
> > +       determines which PCIe controller works in EP mode and which
> PCIe
> > +       controller works in RC mode.
> > +
> > +config PCI_LAYERSCAPE_EP
> > +     bool "Freescale Layerscape PCIe controller - Endpoint mode"
> > +     depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
> > +     depends on PCI_ENDPOINT
> > +     select PCIE_DW_EP
> > +     help
> > +       Say Y here if you want to enable PCIe controller support on
> Layerscape
> > +       SoCs to work in Endpoint mode.
> > +       This controller can work either as EP or RC. The
> RCW[HOST_AGT_PEX]
> > +       determines which PCIe controller works in EP mode and which
> PCIe
> > +       controller works in RC mode.
> >
> >  config PCI_HISI
> >       depends on OF && (ARM64 || COMPILE_TEST) diff --git
> > a/drivers/pci/controller/dwc/Makefile
> > b/drivers/pci/controller/dwc/Makefile
> > index b085dfd..824fde7 100644
> > --- a/drivers/pci/controller/dwc/Makefile
> > +++ b/drivers/pci/controller/dwc/Makefile
> > @@ -8,7 +8,8 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
> >  obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
> >  obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
> >  obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
> > -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
> > +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> > +obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
> >  obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
> >  obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
> >  obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
> > --
> > 1.7.1
> >

Patch
diff mbox series

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index a6ce1ee..a41ccf5 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -131,13 +131,29 @@  config PCI_KEYSTONE_EP
 	  DesignWare core functions to implement the driver.
 
 config PCI_LAYERSCAPE
-	bool "Freescale Layerscape PCIe controller"
+	bool "Freescale Layerscape PCIe controller - Host mode"
 	depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
 	depends on PCI_MSI_IRQ_DOMAIN
 	select MFD_SYSCON
 	select PCIE_DW_HOST
 	help
-	  Say Y here if you want PCIe controller support on Layerscape SoCs.
+	  Say Y here if you want to enable PCIe controller support on Layerscape
+	  SoCs to work in Host mode.
+	  This controller can work either as EP or RC. The RCW[HOST_AGT_PEX]
+	  determines which PCIe controller works in EP mode and which PCIe
+	  controller works in RC mode.
+
+config PCI_LAYERSCAPE_EP
+	bool "Freescale Layerscape PCIe controller - Endpoint mode"
+	depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	help
+	  Say Y here if you want to enable PCIe controller support on Layerscape
+	  SoCs to work in Endpoint mode.
+	  This controller can work either as EP or RC. The RCW[HOST_AGT_PEX]
+	  determines which PCIe controller works in EP mode and which PCIe
+	  controller works in RC mode.
 
 config PCI_HISI
 	depends on OF && (ARM64 || COMPILE_TEST)
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index b085dfd..824fde7 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -8,7 +8,8 @@  obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
 obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
 obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
 obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
-obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
+obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
+obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
 obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
 obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o