[18/30] Changes to mips
diff mbox series

Message ID a477de68e5777f63f1c09300c3261012eac5f9df.1561408899.git.acsawdey@linux.ibm.com
State New
Headers show
Series
  • Rename movmem pattern to cpymem
Related show

Commit Message

Aaron Sawdey June 25, 2019, 8:22 p.m. UTC
From: Aaron Sawdey <acsawdey@linux.ibm.com>

	* config/mips/mips.c (mips_use_by_pieces_infrastructure_p):
	Change movmem to cpymem.
	* config/mips/mips.h: Change movmem to cpymem.
	* config/mips/mips.md (movmemsi): Change name to cpymemsi.
---
 gcc/config/mips/mips.c  | 10 +++++-----
 gcc/config/mips/mips.h  | 10 +++++-----
 gcc/config/mips/mips.md |  2 +-
 3 files changed, 11 insertions(+), 11 deletions(-)

Patch
diff mbox series

diff --git a/gcc/config/mips/mips.c b/gcc/config/mips/mips.c
index 0e1a68a..cbebb45 100644
--- a/gcc/config/mips/mips.c
+++ b/gcc/config/mips/mips.c
@@ -7938,15 +7938,15 @@  mips_use_by_pieces_infrastructure_p (unsigned HOST_WIDE_INT size,
 {
   if (op == STORE_BY_PIECES)
     return mips_store_by_pieces_p (size, align);
-  if (op == MOVE_BY_PIECES && HAVE_movmemsi)
+  if (op == MOVE_BY_PIECES && HAVE_cpymemsi)
     {
-      /* movmemsi is meant to generate code that is at least as good as
-	 move_by_pieces.  However, movmemsi effectively uses a by-pieces
+      /* cpymemsi is meant to generate code that is at least as good as
+	 move_by_pieces.  However, cpymemsi effectively uses a by-pieces
 	 implementation both for moves smaller than a word and for
 	 word-aligned moves of no more than MIPS_MAX_MOVE_BYTES_STRAIGHT
 	 bytes.  We should allow the tree-level optimisers to do such
 	 moves by pieces, as it often exposes other optimization
-	 opportunities.  We might as well continue to use movmemsi at
+	 opportunities.  We might as well continue to use cpymemsi at
 	 the rtl level though, as it produces better code when
 	 scheduling is disabled (such as at -O).  */
       if (currently_expanding_to_rtl)
@@ -8165,7 +8165,7 @@  mips_block_move_loop (rtx dest, rtx src, HOST_WIDE_INT length,
     emit_insn (gen_nop ());
 }
 
-/* Expand a movmemsi instruction, which copies LENGTH bytes from
+/* Expand a cpymemsi instruction, which copies LENGTH bytes from
    memory reference SRC to memory reference DEST.  */
 
 bool
diff --git a/gcc/config/mips/mips.h b/gcc/config/mips/mips.h
index 953d82e..a5be7fa3 100644
--- a/gcc/config/mips/mips.h
+++ b/gcc/config/mips/mips.h
@@ -3099,12 +3099,12 @@  while (0)
 #define MIPS_MIN_MOVE_MEM_ALIGN 16
 
 /* The maximum number of bytes that can be copied by one iteration of
-   a movmemsi loop; see mips_block_move_loop.  */
+   a cpymemsi loop; see mips_block_move_loop.  */
 #define MIPS_MAX_MOVE_BYTES_PER_LOOP_ITER \
   (UNITS_PER_WORD * 4)
 
 /* The maximum number of bytes that can be copied by a straight-line
-   implementation of movmemsi; see mips_block_move_straight.  We want
+   implementation of cpymemsi; see mips_block_move_straight.  We want
    to make sure that any loop-based implementation will iterate at
    least twice.  */
 #define MIPS_MAX_MOVE_BYTES_STRAIGHT \
@@ -3119,11 +3119,11 @@  while (0)
 
 #define MIPS_CALL_RATIO 8
 
-/* Any loop-based implementation of movmemsi will have at least
+/* Any loop-based implementation of cpymemsi will have at least
    MIPS_MAX_MOVE_BYTES_STRAIGHT / UNITS_PER_WORD memory-to-memory
    moves, so allow individual copies of fewer elements.
 
-   When movmemsi is not available, use a value approximating
+   When cpymemsi is not available, use a value approximating
    the length of a memcpy call sequence, so that move_by_pieces
    will generate inline code if it is shorter than a function call.
    Since move_by_pieces_ninsns counts memory-to-memory moves, but
@@ -3131,7 +3131,7 @@  while (0)
    value of MIPS_CALL_RATIO to take that into account.  */
 
 #define MOVE_RATIO(speed)				\
-  (HAVE_movmemsi					\
+  (HAVE_cpymemsi					\
    ? MIPS_MAX_MOVE_BYTES_STRAIGHT / MOVE_MAX		\
    : MIPS_CALL_RATIO / 2)
 
diff --git a/gcc/config/mips/mips.md b/gcc/config/mips/mips.md
index 2ae1f7e..d260cf9 100644
--- a/gcc/config/mips/mips.md
+++ b/gcc/config/mips/mips.md
@@ -5638,7 +5638,7 @@ 
 ;; Argument 2 is the length
 ;; Argument 3 is the alignment
 
-(define_expand "movmemsi"
+(define_expand "cpymemsi"
   [(parallel [(set (match_operand:BLK 0 "general_operand")
 		   (match_operand:BLK 1 "general_operand"))
 	      (use (match_operand:SI 2 ""))