[GIT,PULL,5/7] i.MX arm32 DT changes for 5.3
mbox series

Message ID 20190625075305.29082-5-shawnguo@kernel.org
State New
Headers show
Series
  • [GIT,PULL,1/7] i.MX drivers change for 5.3
Related show

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.3

Message

Shawn Guo June 25, 2019, 7:53 a.m. UTC
The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9:

  Linux 5.2-rc1 (2019-05-19 15:47:09 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.3

for you to fetch changes up to 48cbd9ff53b7391111e8460c3d9307ba14a5f8c0:

  ARM: dts: imx7ulp-evk: enable USBOTG1 support (2019-06-24 23:12:18 +0800)

----------------------------------------------------------------
i.MX arm32 DT changes for 5.3:
 - New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based
   Meerkat96 board, and NXP LS1021A-TSN board.
 - A series from Andrey Smirnov to update vf610-zii-dev and
   imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path,
   adding QSPI device, and dropping unused pinmux.
 - Update imx6sl and imx6qdl device tree to assign corresponding clocks
   instead of dummy clock.
 - Update i.MX6/7 boards from NXP to assign corresponding power supply
   for LDOs.
 - Update i.MX6/7 device trees to enable SNVS poweroff key support
   according to board design.
 - Update coresight DT binding for i.MX7 according to consolidations
   for CoreSight replicator and funnel.
 - A series from Marek Vasut to update M53Menlo board on various devices
   like UART, USB, ethernet PHY, GPIOs etc.
 - Enable USBOTG support for imx7ulp and evk board.
 - A series from Peter Robinson to update imx6sx-udoo board, switching
   to SPDX License Identifier, enabling I2C devices and bluetooth
   support.
 - Add video capture support for i.MX53 and imx53-smd board.
 - Add PXP device for i.MX6UL.
 - Other random small updates on various boards.

----------------------------------------------------------------
Andrey Smirnov (4):
      ARM: dts: vf610-zii-dev: Fix incorrect UART2 pin assignment
      ARM: dts: vf610-zii-dev: Add QSPI node
      ARM: dts: imx7d-zii-rpu2: Fix incorrrect 'stdout-path'
      ARM: dts: imx7d-zii-rpu2: Drop unused pinmux entries

Anson Huang (17):
      ARM: dts: imx6sl: Assign corresponding clocks instead of dummy clock
      ARM: dts: imx6qdl: Assign corresponding clocks instead of dummy clock
      ARM: dts: imx7ulp: Add tpm pwm support
      ARM: dts: imx7ulp-evk: Add backlight support
      ARM: dts: imx6ul: add clock-frequency to CPU node
      ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs
      ARM: dts: imx7d-sdb: Assign corresponding power supply for LDOs
      ARM: dts: imx6sl-evk: Assign corresponding power supply for LDOs
      ARM: dts: imx6sll-evk: Assign corresponding power supply for vdd3p0
      ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOs
      ARM: dts: imx7d-sdb: Make SW2's voltage fixed
      ARM: dts: imx6qdl: Enable SNVS power key according to board design
      ARM: dts: imx6sx: Enable SNVS power key according to board design
      ARM: dts: imx6ul: Enable SNVS power key according to board design
      ARM: dts: imx6sll: Enable SNVS power key according to board design
      ARM: dts: imx7s: Enable SNVS power key according to board design
      ARM: dts: imx6sll: Enable SNVS poweroff according to board design

Igor Opaniuk (1):
      ARM: dts: imx6ull-colibri: enable UHS-I for USDHC1

Leo Yan (1):
      ARM: dts: imx7s: Update coresight DT bindings

Leonard Crestez (1):
      ARM: dts: imx7d: Update cpufreq OPP table

Manivannan Sadhasivam (1):
      ARM: dts: Add support for 96Boards Meerkat96 board

Marek Vasut (9):
      ARM: dts: imx53: Update UART configuration on M53Menlo
      ARM: dts: imx53: Update USB configuration on M53Menlo
      ARM: dts: imx53: Add ethernet PHY reset on M53Menlo
      ARM: dts: imx53: Select netdev trigger for Yellow LED on M53Menlo
      ARM: dts: imx53: Add power GPIOs on M53Menlo
      ARM: dts: imx53: Add GPIO beeper on M53Menlo
      ARM: dts: imx53: Add GPIO line names on M53Menlo
      ARM: dts: imx53: Update pinmux settings on M53Menlo
      ARM: dts: imx53: Bind CPLD on M53Menlo

Michael Grzeschik (1):
      ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support

Peter Chen (2):
      ARM: dts: imx7ulp: add imx7ulp USBOTG1 support
      ARM: dts: imx7ulp-evk: enable USBOTG1 support

Peter Robinson (3):
      ARM: dts: imx6sx-udoo: Use the correct style for SPDX License Identifier
      ARM: dts: imx6sx-udoo-neo: enable i2c-2 and i2c-4 for onboard sensors
      ARM: dts: imx6sx-udoo-neo: add bluetooth config to uart3

Priit Laes (1):
      ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module

Rob Herring (1):
      ARM: dts: imx: Avoid colliding 'display' node and property names

Steve Longerbeam (2):
      ARM: dts: imx53: Add capture-subsystem device
      ARM: dts: imx53-smd: Add OV5642 video capture support

S├ębastien Szymanski (1):
      ARM: dts: imx6ul: Add PXP node

Vladimir Oltean (1):
      ARM: dts: Introduce the NXP LS1021A-TSN board

 arch/arm/boot/dts/Makefile                     |   2 +
 arch/arm/boot/dts/imx53-m53menlo.dts           | 266 ++++++--
 arch/arm/boot/dts/imx53-smd.dts                |  73 +++
 arch/arm/boot/dts/imx53.dtsi                   |  12 +
 arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi   |  12 +
 arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi    |  36 ++
 arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi  | 815 +++++++++++++++++++++++++
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi         |  16 +
 arch/arm/boot/dts/imx6qdl.dtsi                 |  11 +-
 arch/arm/boot/dts/imx6sl-evk.dts               |  12 +
 arch/arm/boot/dts/imx6sl.dtsi                  |  12 +-
 arch/arm/boot/dts/imx6sll-evk.dts              |  12 +
 arch/arm/boot/dts/imx6sll.dtsi                 |   2 +
 arch/arm/boot/dts/imx6sx-sdb-reva.dts          |  16 +
 arch/arm/boot/dts/imx6sx-sdb.dts               |  16 +
 arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts    |  39 +-
 arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts |  47 +-
 arch/arm/boot/dts/imx6sx-udoo-neo-full.dts     |  47 +-
 arch/arm/boot/dts/imx6sx-udoo-neo.dtsi         |  89 ++-
 arch/arm/boot/dts/imx6sx.dtsi                  |   7 +-
 arch/arm/boot/dts/imx6ul-14x14-evk.dtsi        |   4 +
 arch/arm/boot/dts/imx6ul-geam.dts              |   2 +-
 arch/arm/boot/dts/imx6ul-isiot.dtsi            |   2 +-
 arch/arm/boot/dts/imx6ul.dtsi                  |  14 +
 arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi |  11 +-
 arch/arm/boot/dts/imx6ull-colibri.dtsi         |   6 +
 arch/arm/boot/dts/imx6ull.dtsi                 |   7 +
 arch/arm/boot/dts/imx7d-meerkat96.dts          | 375 ++++++++++++
 arch/arm/boot/dts/imx7d-sdb.dts                |  16 +-
 arch/arm/boot/dts/imx7d-zii-rpu2.dts           |  16 +-
 arch/arm/boot/dts/imx7d.dtsi                   |  16 +-
 arch/arm/boot/dts/imx7s.dtsi                   |  11 +-
 arch/arm/boot/dts/imx7ulp-evk.dts              |  55 ++
 arch/arm/boot/dts/imx7ulp.dtsi                 |  38 ++
 arch/arm/boot/dts/ls1021a-tsn.dts              | 289 +++++++++
 arch/arm/boot/dts/vf610-zii-dev.dtsi           |  52 +-
 36 files changed, 2198 insertions(+), 258 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi
 create mode 100644 arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
 create mode 100644 arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
 create mode 100644 arch/arm/boot/dts/imx7d-meerkat96.dts
 create mode 100644 arch/arm/boot/dts/ls1021a-tsn.dts

Comments

Olof Johansson June 25, 2019, 11:52 a.m. UTC | #1
On Tue, Jun 25, 2019 at 03:53:03PM +0800, Shawn Guo wrote:
> The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9:
> 
>   Linux 5.2-rc1 (2019-05-19 15:47:09 -0700)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.3
> 
> for you to fetch changes up to 48cbd9ff53b7391111e8460c3d9307ba14a5f8c0:
> 
>   ARM: dts: imx7ulp-evk: enable USBOTG1 support (2019-06-24 23:12:18 +0800)
> 
> ----------------------------------------------------------------
> i.MX arm32 DT changes for 5.3:
>  - New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based
>    Meerkat96 board, and NXP LS1021A-TSN board.
>  - A series from Andrey Smirnov to update vf610-zii-dev and
>    imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path,
>    adding QSPI device, and dropping unused pinmux.
>  - Update imx6sl and imx6qdl device tree to assign corresponding clocks
>    instead of dummy clock.
>  - Update i.MX6/7 boards from NXP to assign corresponding power supply
>    for LDOs.
>  - Update i.MX6/7 device trees to enable SNVS poweroff key support
>    according to board design.
>  - Update coresight DT binding for i.MX7 according to consolidations
>    for CoreSight replicator and funnel.
>  - A series from Marek Vasut to update M53Menlo board on various devices
>    like UART, USB, ethernet PHY, GPIOs etc.
>  - Enable USBOTG support for imx7ulp and evk board.
>  - A series from Peter Robinson to update imx6sx-udoo board, switching
>    to SPDX License Identifier, enabling I2C devices and bluetooth
>    support.
>  - Add video capture support for i.MX53 and imx53-smd board.
>  - Add PXP device for i.MX6UL.
>  - Other random small updates on various boards.

Merged, thanks!


-Olof