diff mbox series

[v3,9/9] ARM: dts: sun8i: s3: add devicetree for Lichee zero plus w/ S3

Message ID 20190623043801.14040-10-icenowy@aosc.io
State New
Headers show
Series Support for Allwinner V3/S3L and Sochip S3 | expand

Commit Message

Icenowy Zheng June 23, 2019, 4:38 a.m. UTC 
Lichee zero plus is a core board made by Sipeed, which includes on-board
TF slot or SMT SD NAND, and optional SPI NOR or eMMC, a UART debug
header, a microUSB slot and a gold finger connector for expansion. It
can use either Sochip S3 or Allwinner S3L SoC.

Add the basic device tree for the core board, w/o optional onboard
storage, and with S3 SoC.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v3:
- Drop common regulator DTSI usage and added vcc3v3 regulator.

 arch/arm/boot/dts/Makefile                    |  1 +
 .../boot/dts/sun8i-s3-lichee-zero-plus.dts    |  8 ++++
 .../dts/sun8i-s3-s3l-lichee-zero-plus.dtsi    | 44 +++++++++++++++++++
 3 files changed, 53 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
 create mode 100644 arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi

Comments

Maxime Ripard June 24, 2019, 12:43 p.m. UTC | #1 
On Sun, Jun 23, 2019 at 12:38:01PM +0800, Icenowy Zheng wrote:
> Lichee zero plus is a core board made by Sipeed, which includes on-board
> TF slot or SMT SD NAND, and optional SPI NOR or eMMC, a UART debug
> header, a microUSB slot and a gold finger connector for expansion. It
> can use either Sochip S3 or Allwinner S3L SoC.
>
> Add the basic device tree for the core board, w/o optional onboard
> storage, and with S3 SoC.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
> Changes in v3:
> - Drop common regulator DTSI usage and added vcc3v3 regulator.
>
>  arch/arm/boot/dts/Makefile                    |  1 +
>  .../boot/dts/sun8i-s3-lichee-zero-plus.dts    |  8 ++++
>  .../dts/sun8i-s3-s3l-lichee-zero-plus.dtsi    | 44 +++++++++++++++++++
>  3 files changed, 53 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
>  create mode 100644 arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index c4742afe41a7..d24dec29245e 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1113,6 +1113,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
>  	sun8i-r16-nintendo-super-nes-classic.dtb \
>  	sun8i-r16-parrot.dtb \
>  	sun8i-r40-bananapi-m2-ultra.dtb \
> +	sun8i-s3-lichee-zero-plus.dtb \
>  	sun8i-t3-cqa3t-bv3.dtb \
>  	sun8i-v3s-licheepi-zero.dtb \
>  	sun8i-v3s-licheepi-zero-dock.dtb \
> diff --git a/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
> new file mode 100644
> index 000000000000..7d2f6b145190
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
> @@ -0,0 +1,8 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
> + */
> +
> +/dts-v1/;
> +#include "sun8i-s3.dtsi"
> +#include "sun8i-s3-s3l-lichee-zero-plus.dtsi"
> diff --git a/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi b/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
> new file mode 100644
> index 000000000000..e68f738c3046
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
> @@ -0,0 +1,46 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	reg_vcc3v3: vcc3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +};
> +
> +&mmc0 {
> +	broken-cd;
> +	bus-width = <4>;
> +	vmmc-supply = <&reg_vcc3v3>;
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	pinctrl-0 = <&uart0_pb_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&usb_otg {
> +	dr_mode = "otg";
> +	status = "okay";
> +};
> +
> +&usbphy {
> +	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
> +	status = "okay";
> +};

How can it do OTG if there's no controllable VBUS regulator?

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Icenowy Zheng June 24, 2019, 1:43 p.m. UTC | #2 
于 2019年6月24日 GMT+08:00 下午8:43:01, Maxime Ripard <maxime.ripard@bootlin.com> 写到:
>On Sun, Jun 23, 2019 at 12:38:01PM +0800, Icenowy Zheng wrote:
>> Lichee zero plus is a core board made by Sipeed, which includes
>on-board
>> TF slot or SMT SD NAND, and optional SPI NOR or eMMC, a UART debug
>> header, a microUSB slot and a gold finger connector for expansion. It
>> can use either Sochip S3 or Allwinner S3L SoC.
>>
>> Add the basic device tree for the core board, w/o optional onboard
>> storage, and with S3 SoC.
>>
>> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
>> ---
>> Changes in v3:
>> - Drop common regulator DTSI usage and added vcc3v3 regulator.
>>
>>  arch/arm/boot/dts/Makefile                    |  1 +
>>  .../boot/dts/sun8i-s3-lichee-zero-plus.dts    |  8 ++++
>>  .../dts/sun8i-s3-s3l-lichee-zero-plus.dtsi    | 44
>+++++++++++++++++++
>>  3 files changed, 53 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
>>  create mode 100644
>arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index c4742afe41a7..d24dec29245e 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -1113,6 +1113,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
>>  	sun8i-r16-nintendo-super-nes-classic.dtb \
>>  	sun8i-r16-parrot.dtb \
>>  	sun8i-r40-bananapi-m2-ultra.dtb \
>> +	sun8i-s3-lichee-zero-plus.dtb \
>>  	sun8i-t3-cqa3t-bv3.dtb \
>>  	sun8i-v3s-licheepi-zero.dtb \
>>  	sun8i-v3s-licheepi-zero-dock.dtb \
>> diff --git a/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
>b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
>> new file mode 100644
>> index 000000000000..7d2f6b145190
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
>> @@ -0,0 +1,8 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
>> + */
>> +
>> +/dts-v1/;
>> +#include "sun8i-s3.dtsi"
>> +#include "sun8i-s3-s3l-lichee-zero-plus.dtsi"
>> diff --git a/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
>b/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
>> new file mode 100644
>> index 000000000000..e68f738c3046
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
>> @@ -0,0 +1,46 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
>> + */
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +
>> +/ {
>> +	aliases {
>> +		serial0 = &uart0;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = "serial0:115200n8";
>> +	};
>> +
>> +	reg_vcc3v3: vcc3v3 {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "vcc3v3";
>> +		regulator-min-microvolt = <3300000>;
>> +		regulator-max-microvolt = <3300000>;
>> +	};
>> +};
>> +
>> +&mmc0 {
>> +	broken-cd;
>> +	bus-width = <4>;
>> +	vmmc-supply = <&reg_vcc3v3>;
>> +	status = "okay";
>> +};
>> +
>> +&uart0 {
>> +	pinctrl-0 = <&uart0_pb_pins>;
>> +	pinctrl-names = "default";
>> +	status = "okay";
>> +};
>> +
>> +&usb_otg {
>> +	dr_mode = "otg";
>> +	status = "okay";
>> +};
>> +
>> +&usbphy {
>> +	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
>> +	status = "okay";
>> +};
>
>How can it do OTG if there's no controllable VBUS regulator?

All 5V's are connected together, like Orange Pi Zero.

>
>Maxime
>
>--
>Maxime Ripard, Bootlin
>Embedded Linux and Kernel engineering
>https://bootlin.com
Maxime Ripard June 24, 2019, 1:48 p.m. UTC | #3 
On Mon, Jun 24, 2019 at 09:43:23PM +0800, Icenowy Zheng wrote:
> >> +&usb_otg {
> >> +	dr_mode = "otg";
> >> +	status = "okay";
> >> +};
> >> +
> >> +&usbphy {
> >> +	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
> >> +	status = "okay";
> >> +};
> >
> >How can it do OTG if there's no controllable VBUS regulator?
>
> All 5V's are connected together, like Orange Pi Zero.

So it's a "it can't"?

And the orange pi zero says that it can only do peripheral.

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c4742afe41a7..d24dec29245e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1113,6 +1113,7 @@  dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-r16-nintendo-super-nes-classic.dtb \
 	sun8i-r16-parrot.dtb \
 	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-s3-lichee-zero-plus.dtb \
 	sun8i-t3-cqa3t-bv3.dtb \
 	sun8i-v3s-licheepi-zero.dtb \
 	sun8i-v3s-licheepi-zero-dock.dtb \
diff --git a/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
new file mode 100644
index 000000000000..7d2f6b145190
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
@@ -0,0 +1,8 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-s3.dtsi"
+#include "sun8i-s3-s3l-lichee-zero-plus.dtsi"
diff --git a/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi b/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
new file mode 100644
index 000000000000..e68f738c3046
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
@@ -0,0 +1,46 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};