diff mbox series

[5/6] dt-bindings: usb: bdc: Update compatible strings

Message ID 1561064991-16874-6-git-send-email-alcooperx@gmail.com
State Not Applicable, archived
Headers show
Series usb: bdc: Updates and fixes to USB BDC driver | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Alan Cooper June 20, 2019, 9:09 p.m. UTC 
Remove "brcm,bdc-v0.16" because it was never used on any system.
Add "brcm,bdc-udc-v3.1" which exists for any STB system with BDC.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
---
 Documentation/devicetree/bindings/usb/brcm,bdc.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Rob Herring July 9, 2019, 8:14 p.m. UTC | #1 
On Thu, 20 Jun 2019 17:09:50 -0400, Al Cooper wrote:
> Remove "brcm,bdc-v0.16" because it was never used on any system.
> Add "brcm,bdc-udc-v3.1" which exists for any STB system with BDC.
> 
> Signed-off-by: Al Cooper <alcooperx@gmail.com>
> ---
>  Documentation/devicetree/bindings/usb/brcm,bdc.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.txt b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
index 63e63af3bf59..597f3902d857 100644
--- a/Documentation/devicetree/bindings/usb/brcm,bdc.txt
+++ b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
@@ -4,7 +4,7 @@  Broadcom USB Device Controller (BDC)
 Required properties:
 
 - compatible: must be one of:
-                "brcm,bdc-v0.16"
+                "brcm,bdc-udc-v3.1"
                 "brcm,bdc"
 - reg: the base register address and length
 - interrupts: the interrupt line for this controller
@@ -21,7 +21,7 @@  On Broadcom STB platforms, these properties are required:
 Example:
 
         bdc@f0b02000 {
-                compatible = "brcm,bdc-v0.16";
+                compatible = "brcm,bdc-udc-v3.1";
                 reg = <0xf0b02000 0xfc4>;
                 interrupts = <0x0 0x60 0x0>;
                 phys = <&usbphy_0 0x0>;