diff mbox series

[v3,1/7] PCI/ATS: Fix pci_prg_resp_pasid_required() dependency issues

Message ID a0534c2ec69e0d7e03c4da3e8d539e8591a5686c.1561061640.git.sathyanarayanan.kuppuswamy@linux.intel.com
State Superseded
Delegated to: Bjorn Helgaas
Headers show
Series Fix PF/VF dependency issue | expand

Commit Message

Kuppuswamy Sathyanarayanan June 20, 2019, 8:38 p.m. UTC 
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

Since pci_prg_resp_pasid_required() function has dependency on both
PASID and PRI, define it only if both CONFIG_PCI_PRI and
CONFIG_PCI_PASID config options are enabled.

Fixes: e5567f5f6762 ("PCI/ATS: Add pci_prg_resp_pasid_required()
interface.")
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 drivers/pci/ats.c       | 10 ++++++----
 include/linux/pci-ats.h | 12 +++++++++---
 2 files changed, 15 insertions(+), 7 deletions(-)

Comments

Bjorn Helgaas July 3, 2019, 5:56 p.m. UTC | #1 
On Thu, Jun 20, 2019 at 01:38:42PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> 
> Since pci_prg_resp_pasid_required() function has dependency on both
> PASID and PRI, define it only if both CONFIG_PCI_PRI and
> CONFIG_PCI_PASID config options are enabled.

This is likely just confusion on my part, but I don't understand what
you're doing here.

pci_prg_resp_pasid_required() does not actually *depend* on the
CONFIG_PCI_PRI config symbol.

It is currently compiled only if CONFIG_PCI_ATS=y (which controls
compilation of the entire ats.c) and CONFIG_PCI_PASID=y (since it's
within #ifdef CONFIG_PCI_PASID).

pci_prg_resp_pasid_required() is called by attach_device()
(amd_iommu.c), which is only compiled if CONFIG_AMD_IOMMU=y, and that
selects PCI_PRI.

It is also called by iommu_enable_dev_iotlb() (intel-iommu.c).  That
file is compiled if CONFIG_INTEL_IOMMU=y and the call itself is inside
#ifdef CONFIG_INTEL_IOMMU_SVM.  But I don't see the PCI_PRI connection
here.

If this is just to limit the visibility, say that.  But I don't think
that's really a good reason.  The chain of config symbols seems a
little too complicated.

> Fixes: e5567f5f6762 ("PCI/ATS: Add pci_prg_resp_pasid_required()
> interface.")
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> ---
>  drivers/pci/ats.c       | 10 ++++++----
>  include/linux/pci-ats.h | 12 +++++++++---
>  2 files changed, 15 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
> index 97c08146534a..f9eeb7db0db3 100644
> --- a/drivers/pci/ats.c
> +++ b/drivers/pci/ats.c
> @@ -395,6 +395,8 @@ int pci_pasid_features(struct pci_dev *pdev)
>  }
>  EXPORT_SYMBOL_GPL(pci_pasid_features);
>  
> +#ifdef CONFIG_PCI_PRI
> +
>  /**
>   * pci_prg_resp_pasid_required - Return PRG Response PASID Required bit
>   *				 status.
> @@ -402,10 +404,8 @@ EXPORT_SYMBOL_GPL(pci_pasid_features);
>   *
>   * Returns 1 if PASID is required in PRG Response Message, 0 otherwise.
>   *
> - * Even though the PRG response PASID status is read from PRI Status
> - * Register, since this API will mainly be used by PASID users, this
> - * function is defined within #ifdef CONFIG_PCI_PASID instead of
> - * CONFIG_PCI_PRI.
> + * Since this API has dependency on both PRI and PASID, protect it
> + * with both CONFIG_PCI_PRI and CONFIG_PCI_PASID.
>   */
>  int pci_prg_resp_pasid_required(struct pci_dev *pdev)
>  {
> @@ -425,6 +425,8 @@ int pci_prg_resp_pasid_required(struct pci_dev *pdev)
>  }
>  EXPORT_SYMBOL_GPL(pci_prg_resp_pasid_required);
>  
> +#endif
> +
>  #define PASID_NUMBER_SHIFT	8
>  #define PASID_NUMBER_MASK	(0x1f << PASID_NUMBER_SHIFT)
>  /**
> diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
> index 1ebb88e7c184..1a0bdaee2f32 100644
> --- a/include/linux/pci-ats.h
> +++ b/include/linux/pci-ats.h
> @@ -40,7 +40,6 @@ void pci_disable_pasid(struct pci_dev *pdev);
>  void pci_restore_pasid_state(struct pci_dev *pdev);
>  int pci_pasid_features(struct pci_dev *pdev);
>  int pci_max_pasids(struct pci_dev *pdev);
> -int pci_prg_resp_pasid_required(struct pci_dev *pdev);
>  
>  #else  /* CONFIG_PCI_PASID */
>  
> @@ -67,11 +66,18 @@ static inline int pci_max_pasids(struct pci_dev *pdev)
>  	return -EINVAL;
>  }
>  
> +#endif /* CONFIG_PCI_PASID */
> +
> +#if defined(CONFIG_PCI_PRI) && defined(CONFIG_PCI_PASID)
> +
> +int pci_prg_resp_pasid_required(struct pci_dev *pdev);
> +
> +#else /* CONFIG_PCI_PASID && CONFIG_PCI_PRI */
> +
>  static inline int pci_prg_resp_pasid_required(struct pci_dev *pdev)
>  {
>  	return 0;
>  }
> -#endif /* CONFIG_PCI_PASID */
> -
> +#endif
>  
>  #endif /* LINUX_PCI_ATS_H*/
> -- 
> 2.21.0
>
Kuppuswamy Sathyanarayanan July 3, 2019, 6:23 p.m. UTC | #2 
Hi,

On 7/3/19 10:56 AM, Bjorn Helgaas wrote:
> On Thu, Jun 20, 2019 at 01:38:42PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
>> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>>
>> Since pci_prg_resp_pasid_required() function has dependency on both
>> PASID and PRI, define it only if both CONFIG_PCI_PRI and
>> CONFIG_PCI_PASID config options are enabled.
> This is likely just confusion on my part, but I don't understand what
> you're doing here.
>
> pci_prg_resp_pasid_required() does not actually *depend* on the
> CONFIG_PCI_PRI config symbol.

pci_prg_resp_pasid_required() function internally reads the PRI status 
register to get the status of PASID required bit.

FILE:drivers/pci/ats.c

419         pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
420
421         if (status & PCI_PRI_STATUS_PASID)

Since pci_prg_resp_pasid_required()  function is only used if 
CONFIG_PCI_PASID is enabled, and since it also has internal PCI_PRI 
dependency, I have protected it with both CONFIG_PCI_PASID and 
CONFIG_PCI_PRI ifdefs.

>
> It is currently compiled only if CONFIG_PCI_ATS=y (which controls
> compilation of the entire ats.c) and CONFIG_PCI_PASID=y (since it's
> within #ifdef CONFIG_PCI_PASID).
>
> pci_prg_resp_pasid_required() is called by attach_device()
> (amd_iommu.c), which is only compiled if CONFIG_AMD_IOMMU=y, and that
> selects PCI_PRI.
pci_prg_resp_pasid_required() is also called by intel_iommu.c, and 
enabling CONFIG_INTEL_IOMMU does not enable PCI_PRI/PCI_PASID by default.
>
> It is also called by iommu_enable_dev_iotlb() (intel-iommu.c).  That
> file is compiled if CONFIG_INTEL_IOMMU=y and the call itself is inside
> #ifdef CONFIG_INTEL_IOMMU_SVM.  But I don't see the PCI_PRI connection
> here.
>
> If this is just to limit the visibility, say that.  But I don't think
> that's really a good reason.  The chain of config symbols seems a
> little too complicated.
>
>> Fixes: e5567f5f6762 ("PCI/ATS: Add pci_prg_resp_pasid_required()
>> interface.")
>> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>> ---
>>   drivers/pci/ats.c       | 10 ++++++----
>>   include/linux/pci-ats.h | 12 +++++++++---
>>   2 files changed, 15 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
>> index 97c08146534a..f9eeb7db0db3 100644
>> --- a/drivers/pci/ats.c
>> +++ b/drivers/pci/ats.c
>> @@ -395,6 +395,8 @@ int pci_pasid_features(struct pci_dev *pdev)
>>   }
>>   EXPORT_SYMBOL_GPL(pci_pasid_features);
>>   
>> +#ifdef CONFIG_PCI_PRI
>> +
>>   /**
>>    * pci_prg_resp_pasid_required - Return PRG Response PASID Required bit
>>    *				 status.
>> @@ -402,10 +404,8 @@ EXPORT_SYMBOL_GPL(pci_pasid_features);
>>    *
>>    * Returns 1 if PASID is required in PRG Response Message, 0 otherwise.
>>    *
>> - * Even though the PRG response PASID status is read from PRI Status
>> - * Register, since this API will mainly be used by PASID users, this
>> - * function is defined within #ifdef CONFIG_PCI_PASID instead of
>> - * CONFIG_PCI_PRI.
>> + * Since this API has dependency on both PRI and PASID, protect it
>> + * with both CONFIG_PCI_PRI and CONFIG_PCI_PASID.
>>    */
>>   int pci_prg_resp_pasid_required(struct pci_dev *pdev)
>>   {
>> @@ -425,6 +425,8 @@ int pci_prg_resp_pasid_required(struct pci_dev *pdev)
>>   }
>>   EXPORT_SYMBOL_GPL(pci_prg_resp_pasid_required);
>>   
>> +#endif
>> +
>>   #define PASID_NUMBER_SHIFT	8
>>   #define PASID_NUMBER_MASK	(0x1f << PASID_NUMBER_SHIFT)
>>   /**
>> diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
>> index 1ebb88e7c184..1a0bdaee2f32 100644
>> --- a/include/linux/pci-ats.h
>> +++ b/include/linux/pci-ats.h
>> @@ -40,7 +40,6 @@ void pci_disable_pasid(struct pci_dev *pdev);
>>   void pci_restore_pasid_state(struct pci_dev *pdev);
>>   int pci_pasid_features(struct pci_dev *pdev);
>>   int pci_max_pasids(struct pci_dev *pdev);
>> -int pci_prg_resp_pasid_required(struct pci_dev *pdev);
>>   
>>   #else  /* CONFIG_PCI_PASID */
>>   
>> @@ -67,11 +66,18 @@ static inline int pci_max_pasids(struct pci_dev *pdev)
>>   	return -EINVAL;
>>   }
>>   
>> +#endif /* CONFIG_PCI_PASID */
>> +
>> +#if defined(CONFIG_PCI_PRI) && defined(CONFIG_PCI_PASID)
>> +
>> +int pci_prg_resp_pasid_required(struct pci_dev *pdev);
>> +
>> +#else /* CONFIG_PCI_PASID && CONFIG_PCI_PRI */
>> +
>>   static inline int pci_prg_resp_pasid_required(struct pci_dev *pdev)
>>   {
>>   	return 0;
>>   }
>> -#endif /* CONFIG_PCI_PASID */
>> -
>> +#endif
>>   
>>   #endif /* LINUX_PCI_ATS_H*/
>> -- 
>> 2.21.0
>>
diff mbox series

Patch

diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index 97c08146534a..f9eeb7db0db3 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -395,6 +395,8 @@  int pci_pasid_features(struct pci_dev *pdev)
 }
 EXPORT_SYMBOL_GPL(pci_pasid_features);
 
+#ifdef CONFIG_PCI_PRI
+
 /**
  * pci_prg_resp_pasid_required - Return PRG Response PASID Required bit
  *				 status.
@@ -402,10 +404,8 @@  EXPORT_SYMBOL_GPL(pci_pasid_features);
  *
  * Returns 1 if PASID is required in PRG Response Message, 0 otherwise.
  *
- * Even though the PRG response PASID status is read from PRI Status
- * Register, since this API will mainly be used by PASID users, this
- * function is defined within #ifdef CONFIG_PCI_PASID instead of
- * CONFIG_PCI_PRI.
+ * Since this API has dependency on both PRI and PASID, protect it
+ * with both CONFIG_PCI_PRI and CONFIG_PCI_PASID.
  */
 int pci_prg_resp_pasid_required(struct pci_dev *pdev)
 {
@@ -425,6 +425,8 @@  int pci_prg_resp_pasid_required(struct pci_dev *pdev)
 }
 EXPORT_SYMBOL_GPL(pci_prg_resp_pasid_required);
 
+#endif
+
 #define PASID_NUMBER_SHIFT	8
 #define PASID_NUMBER_MASK	(0x1f << PASID_NUMBER_SHIFT)
 /**
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
index 1ebb88e7c184..1a0bdaee2f32 100644
--- a/include/linux/pci-ats.h
+++ b/include/linux/pci-ats.h
@@ -40,7 +40,6 @@  void pci_disable_pasid(struct pci_dev *pdev);
 void pci_restore_pasid_state(struct pci_dev *pdev);
 int pci_pasid_features(struct pci_dev *pdev);
 int pci_max_pasids(struct pci_dev *pdev);
-int pci_prg_resp_pasid_required(struct pci_dev *pdev);
 
 #else  /* CONFIG_PCI_PASID */
 
@@ -67,11 +66,18 @@  static inline int pci_max_pasids(struct pci_dev *pdev)
 	return -EINVAL;
 }
 
+#endif /* CONFIG_PCI_PASID */
+
+#if defined(CONFIG_PCI_PRI) && defined(CONFIG_PCI_PASID)
+
+int pci_prg_resp_pasid_required(struct pci_dev *pdev);
+
+#else /* CONFIG_PCI_PASID && CONFIG_PCI_PRI */
+
 static inline int pci_prg_resp_pasid_required(struct pci_dev *pdev)
 {
 	return 0;
 }
-#endif /* CONFIG_PCI_PASID */
-
+#endif
 
 #endif /* LINUX_PCI_ATS_H*/