dmaengine: tegra210-adma: fix transfer failure
diff mbox series

Message ID 1561047348-14413-1-git-send-email-spujar@nvidia.com
State New
Headers show
Series
  • dmaengine: tegra210-adma: fix transfer failure
Related show

Commit Message

Sameer Pujar June 20, 2019, 4:15 p.m. UTC
From Tegra186 onwards OUTSTANDING_REQUESTS field is added in channel
configuration register (bits 7:4). ADMA allows a maximum of 8 reads
to source and that many writes to target memory be outstanding at any
given point of time. If this field is not programmed, DMA transfers
fail to happen.

Thus added 'ch_pending_req' member in chip data structure and the
same is populated with maximum allowed pending requests. Since the
field is not applicable to Tegra210, mentioned bit fields are unused
and hence the member is initialized with 0.

Fixes: 433de642a76c ("dmaengine: tegra210-adma: add support for Tegra186/Tegra194")

Signed-off-by: Sameer Pujar <spujar@nvidia.com>
---
 drivers/dma/tegra210-adma.c | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Jon Hunter June 20, 2019, 4:37 p.m. UTC | #1
On 20/06/2019 17:15, Sameer Pujar wrote:
> From Tegra186 onwards OUTSTANDING_REQUESTS field is added in channel
> configuration register (bits 7:4). ADMA allows a maximum of 8 reads
> to source and that many writes to target memory be outstanding at any
> given point of time. If this field is not programmed, DMA transfers
> fail to happen.
> 
> Thus added 'ch_pending_req' member in chip data structure and the
> same is populated with maximum allowed pending requests. Since the
> field is not applicable to Tegra210, mentioned bit fields are unused
> and hence the member is initialized with 0.
> 
> Fixes: 433de642a76c ("dmaengine: tegra210-adma: add support for Tegra186/Tegra194")
> 
> Signed-off-by: Sameer Pujar <spujar@nvidia.com>
> ---
>  drivers/dma/tegra210-adma.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
> index 17ea4dd99..8d291cf 100644
> --- a/drivers/dma/tegra210-adma.c
> +++ b/drivers/dma/tegra210-adma.c
> @@ -96,6 +96,7 @@ struct tegra_adma;
>   * @ch_req_tx_shift: Register offset for AHUB transmit channel select.
>   * @ch_req_rx_shift: Register offset for AHUB receive channel select.
>   * @ch_base_offset: Register offset of DMA channel registers.
> + * @ch_pending_req: Outstaning DMA requests for a channel.
>   * @ch_fifo_ctrl: Default value for channel FIFO CTRL register.
>   * @ch_req_mask: Mask for Tx or Rx channel select.
>   * @ch_req_max: Maximum number of Tx or Rx channels available.
> @@ -109,6 +110,7 @@ struct tegra_adma_chip_data {
>  	unsigned int ch_req_tx_shift;
>  	unsigned int ch_req_rx_shift;
>  	unsigned int ch_base_offset;
> +	unsigned int ch_pending_req;
>  	unsigned int ch_fifo_ctrl;
>  	unsigned int ch_req_mask;
>  	unsigned int ch_req_max;
> @@ -613,6 +615,7 @@ static int tegra_adma_set_xfer_params(struct tegra_adma_chan *tdc,
>  			 ADMA_CH_CTRL_FLOWCTRL_EN;
>  	ch_regs->config |= cdata->adma_get_burst_config(burst_size);
>  	ch_regs->config |= ADMA_CH_CONFIG_WEIGHT_FOR_WRR(1);
> +	ch_regs->config |= cdata->ch_pending_req;
>  	ch_regs->fifo_ctrl = cdata->ch_fifo_ctrl;
>  	ch_regs->tc = desc->period_len & ADMA_CH_TC_COUNT_MASK;
>  
> @@ -797,6 +800,7 @@ static const struct tegra_adma_chip_data tegra210_chip_data = {
>  	.ch_req_tx_shift	= 28,
>  	.ch_req_rx_shift	= 24,
>  	.ch_base_offset		= 0,
> +	.ch_pending_req		= 0,
>  	.ch_fifo_ctrl		= TEGRA210_FIFO_CTRL_DEFAULT,
>  	.ch_req_mask		= 0xf,
>  	.ch_req_max		= 10,
> @@ -811,6 +815,7 @@ static const struct tegra_adma_chip_data tegra186_chip_data = {
>  	.ch_req_tx_shift	= 27,
>  	.ch_req_rx_shift	= 22,
>  	.ch_base_offset		= 0x10000,
> +	.ch_pending_req		= (8 << 4),

So given that this is a value and a shift, I think that we should add a
proper definition like we have for TEGRA186_FIFO_CTRL_DEFAULT below.

>  	.ch_fifo_ctrl		= TEGRA186_FIFO_CTRL_DEFAULT,
>  	.ch_req_mask		= 0x1f,
>  	.ch_req_max		= 20,
> 

Please group your patches into a series if you have more than one for a
given driver.

Cheers
Jon
Jon Hunter June 20, 2019, 4:43 p.m. UTC | #2
On 20/06/2019 17:15, Sameer Pujar wrote:
> From Tegra186 onwards OUTSTANDING_REQUESTS field is added in channel
> configuration register (bits 7:4). ADMA allows a maximum of 8 reads
> to source and that many writes to target memory be outstanding at any
> given point of time. If this field is not programmed, DMA transfers
> fail to happen.

BTW, I am not sure I follow the above. You say a max of 8 reads to the
source, however, the field we are programming can have a value of up to
15. So does that mean this field should only be programmed with a max of 8?

Thanks
Jon
Sameer Pujar June 21, 2019, 2:50 a.m. UTC | #3
On 6/20/2019 10:07 PM, Jon Hunter wrote:
> On 20/06/2019 17:15, Sameer Pujar wrote:
>>  From Tegra186 onwards OUTSTANDING_REQUESTS field is added in channel
>> configuration register (bits 7:4). ADMA allows a maximum of 8 reads
>> to source and that many writes to target memory be outstanding at any
>> given point of time. If this field is not programmed, DMA transfers
>> fail to happen.
>>
>> Thus added 'ch_pending_req' member in chip data structure and the
>> same is populated with maximum allowed pending requests. Since the
>> field is not applicable to Tegra210, mentioned bit fields are unused
>> and hence the member is initialized with 0.
>>
>> Fixes: 433de642a76c ("dmaengine: tegra210-adma: add support for Tegra186/Tegra194")
>>
>> Signed-off-by: Sameer Pujar <spujar@nvidia.com>
>> ---
>>   drivers/dma/tegra210-adma.c | 5 +++++
>>   1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
>> index 17ea4dd99..8d291cf 100644
>> --- a/drivers/dma/tegra210-adma.c
>> +++ b/drivers/dma/tegra210-adma.c
>> @@ -96,6 +96,7 @@ struct tegra_adma;
>>    * @ch_req_tx_shift: Register offset for AHUB transmit channel select.
>>    * @ch_req_rx_shift: Register offset for AHUB receive channel select.
>>    * @ch_base_offset: Register offset of DMA channel registers.
>> + * @ch_pending_req: Outstaning DMA requests for a channel.
>>    * @ch_fifo_ctrl: Default value for channel FIFO CTRL register.
>>    * @ch_req_mask: Mask for Tx or Rx channel select.
>>    * @ch_req_max: Maximum number of Tx or Rx channels available.
>> @@ -109,6 +110,7 @@ struct tegra_adma_chip_data {
>>   	unsigned int ch_req_tx_shift;
>>   	unsigned int ch_req_rx_shift;
>>   	unsigned int ch_base_offset;
>> +	unsigned int ch_pending_req;
>>   	unsigned int ch_fifo_ctrl;
>>   	unsigned int ch_req_mask;
>>   	unsigned int ch_req_max;
>> @@ -613,6 +615,7 @@ static int tegra_adma_set_xfer_params(struct tegra_adma_chan *tdc,
>>   			 ADMA_CH_CTRL_FLOWCTRL_EN;
>>   	ch_regs->config |= cdata->adma_get_burst_config(burst_size);
>>   	ch_regs->config |= ADMA_CH_CONFIG_WEIGHT_FOR_WRR(1);
>> +	ch_regs->config |= cdata->ch_pending_req;
>>   	ch_regs->fifo_ctrl = cdata->ch_fifo_ctrl;
>>   	ch_regs->tc = desc->period_len & ADMA_CH_TC_COUNT_MASK;
>>   
>> @@ -797,6 +800,7 @@ static const struct tegra_adma_chip_data tegra210_chip_data = {
>>   	.ch_req_tx_shift	= 28,
>>   	.ch_req_rx_shift	= 24,
>>   	.ch_base_offset		= 0,
>> +	.ch_pending_req		= 0,
>>   	.ch_fifo_ctrl		= TEGRA210_FIFO_CTRL_DEFAULT,
>>   	.ch_req_mask		= 0xf,
>>   	.ch_req_max		= 10,
>> @@ -811,6 +815,7 @@ static const struct tegra_adma_chip_data tegra186_chip_data = {
>>   	.ch_req_tx_shift	= 27,
>>   	.ch_req_rx_shift	= 22,
>>   	.ch_base_offset		= 0x10000,
>> +	.ch_pending_req		= (8 << 4),
> So given that this is a value and a shift, I think that we should add a
> proper definition like we have for TEGRA186_FIFO_CTRL_DEFAULT below.
I can add.
>
>>   	.ch_fifo_ctrl		= TEGRA186_FIFO_CTRL_DEFAULT,
>>   	.ch_req_mask		= 0x1f,
>>   	.ch_req_max		= 20,
>>
> Please group your patches into a series if you have more than one for a
> given driver.
The other ADMA related change is in Kconfig and a simple change. Current 
patch can go through some review
cycles. Hence didn't want to delay the other patch.
> Cheers
> Jon
>
Sameer Pujar June 21, 2019, 3:06 a.m. UTC | #4
On 6/20/2019 10:13 PM, Jon Hunter wrote:
> On 20/06/2019 17:15, Sameer Pujar wrote:
>>  From Tegra186 onwards OUTSTANDING_REQUESTS field is added in channel
>> configuration register (bits 7:4). ADMA allows a maximum of 8 reads
>> to source and that many writes to target memory be outstanding at any
>> given point of time. If this field is not programmed, DMA transfers
>> fail to happen.
> BTW, I am not sure I follow the above. You say a max of 8 reads to the
> source, however, the field we are programming can have a value of up to
> 15. So does that mean this field should only be programmed with a max of 8?
Yes. As per spec. ADMA allows max value of 8.
> Thanks
> Jon
>

Patch
diff mbox series

diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
index 17ea4dd99..8d291cf 100644
--- a/drivers/dma/tegra210-adma.c
+++ b/drivers/dma/tegra210-adma.c
@@ -96,6 +96,7 @@  struct tegra_adma;
  * @ch_req_tx_shift: Register offset for AHUB transmit channel select.
  * @ch_req_rx_shift: Register offset for AHUB receive channel select.
  * @ch_base_offset: Register offset of DMA channel registers.
+ * @ch_pending_req: Outstaning DMA requests for a channel.
  * @ch_fifo_ctrl: Default value for channel FIFO CTRL register.
  * @ch_req_mask: Mask for Tx or Rx channel select.
  * @ch_req_max: Maximum number of Tx or Rx channels available.
@@ -109,6 +110,7 @@  struct tegra_adma_chip_data {
 	unsigned int ch_req_tx_shift;
 	unsigned int ch_req_rx_shift;
 	unsigned int ch_base_offset;
+	unsigned int ch_pending_req;
 	unsigned int ch_fifo_ctrl;
 	unsigned int ch_req_mask;
 	unsigned int ch_req_max;
@@ -613,6 +615,7 @@  static int tegra_adma_set_xfer_params(struct tegra_adma_chan *tdc,
 			 ADMA_CH_CTRL_FLOWCTRL_EN;
 	ch_regs->config |= cdata->adma_get_burst_config(burst_size);
 	ch_regs->config |= ADMA_CH_CONFIG_WEIGHT_FOR_WRR(1);
+	ch_regs->config |= cdata->ch_pending_req;
 	ch_regs->fifo_ctrl = cdata->ch_fifo_ctrl;
 	ch_regs->tc = desc->period_len & ADMA_CH_TC_COUNT_MASK;
 
@@ -797,6 +800,7 @@  static const struct tegra_adma_chip_data tegra210_chip_data = {
 	.ch_req_tx_shift	= 28,
 	.ch_req_rx_shift	= 24,
 	.ch_base_offset		= 0,
+	.ch_pending_req		= 0,
 	.ch_fifo_ctrl		= TEGRA210_FIFO_CTRL_DEFAULT,
 	.ch_req_mask		= 0xf,
 	.ch_req_max		= 10,
@@ -811,6 +815,7 @@  static const struct tegra_adma_chip_data tegra186_chip_data = {
 	.ch_req_tx_shift	= 27,
 	.ch_req_rx_shift	= 22,
 	.ch_base_offset		= 0x10000,
+	.ch_pending_req		= (8 << 4),
 	.ch_fifo_ctrl		= TEGRA186_FIFO_CTRL_DEFAULT,
 	.ch_req_mask		= 0x1f,
 	.ch_req_max		= 20,