@@ -186,7 +186,7 @@ static void pnv_ioda_free_pe(struct pnv_ioda_pe *pe)
unsigned int pe_num = pe->pe_number;
WARN_ON(pe->pdev);
- WARN_ON(pe->npucomp); /* NPUs are not supposed to be freed */
+ WARN_ON(pe->npucomp); /* NPUs for nvlink are not supposed to be freed */
kfree(pe->npucomp);
memset(pe, 0, sizeof(struct pnv_ioda_pe));
clear_bit(pe_num, phb->ioda.pe_alloc);
@@ -775,6 +775,33 @@ static int pnv_ioda_set_peltv(struct pnv_phb *phb,
return 0;
}
+static void pnv_ioda_unset_peltv(struct pnv_phb *phb,
+ struct pnv_ioda_pe *pe,
+ struct pci_dev *parent)
+{
+ int64_t rc;
+
+ while (parent) {
+ struct pci_dn *pdn = pci_get_pdn(parent);
+ if (pdn && pdn->pe_number != IODA_INVALID_PE) {
+ rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
+ pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
+ /* XXX What to do in case of error ? */
+ }
+ parent = parent->bus->self;
+ }
+
+ opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
+ OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+
+ /* Disassociate PE in PELT */
+ rc = opal_pci_set_peltv(phb->opal_id, pe->pe_number,
+ pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
+ if (rc)
+ pe_warn(pe, "OPAL error %lld remove self from PELTV\n", rc);
+
+}
+
static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
{
struct pci_dev *parent;
@@ -825,25 +852,13 @@ static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
for (rid = pe->rid; rid < rid_end; rid++)
phb->ioda.pe_rmap[rid] = IODA_INVALID_PE;
- /* Release from all parents PELT-V */
- while (parent) {
- struct pci_dn *pdn = pci_get_pdn(parent);
- if (pdn && pdn->pe_number != IODA_INVALID_PE) {
- rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
- pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
- /* XXX What to do in case of error ? */
- }
- parent = parent->bus->self;
- }
-
- opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
- OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+ /*
+ * Release from all parents PELT-V. NPUs don't have a PELTV
+ * table
+ */
+ if (phb->type != PNV_PHB_NPU_NVLINK && phb->type != PNV_PHB_NPU_OCAPI)
+ pnv_ioda_unset_peltv(phb, pe, parent);
- /* Disassociate PE in PELT */
- rc = opal_pci_set_peltv(phb->opal_id, pe->pe_number,
- pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
- if (rc)
- pe_warn(pe, "OPAL error %lld remove self from PELTV\n", rc);
rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
bcomp, dcomp, fcomp, OPAL_UNMAP_PE);
if (rc)
@@ -3528,6 +3543,8 @@ static void pnv_ioda_release_pe(struct pnv_ioda_pe *pe)
case PNV_PHB_IODA2:
pnv_pci_ioda2_release_pe_dma(pe);
break;
+ case PNV_PHB_NPU_OCAPI:
+ break;
default:
WARN_ON(1);
}
@@ -3580,7 +3597,7 @@ static void pnv_pci_release_device(struct pci_dev *pdev)
pe = &phb->ioda.pe_array[pdn->pe_number];
pdn->pe_number = IODA_INVALID_PE;
- WARN_ON(--pe->device_count < 0);
+ WARN_ON((pe->flags != PNV_IODA_PE_DEV) && (--pe->device_count < 0));
if (pe->device_count == 0)
pnv_ioda_release_pe(pe);
}
@@ -3629,6 +3646,7 @@ static const struct pci_controller_ops pnv_npu_ioda_controller_ops = {
static const struct pci_controller_ops pnv_npu_ocapi_ioda_controller_ops = {
.enable_device_hook = pnv_ocapi_enable_device_hook,
+ .release_device = pnv_pci_release_device,
.window_alignment = pnv_pci_window_alignment,
.reset_secondary_bus = pnv_pci_reset_secondary_bus,
.shutdown = pnv_pci_ioda_shutdown,
With hotplug, an opencapi device can now go away. It needs to be released, mostly to clean up its PE state. We were previously not defining any device callback. We can reuse the standard PCI release callback, it does a bit too much for an opencapi device, but it's harmless, and only needs minor tuning. Also separate the undo of the PELT-V code in a separate function, it is not needed for NPU devices and it improves a bit the readability of the code. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> --- arch/powerpc/platforms/powernv/pci-ioda.c | 58 +++++++++++++++-------- 1 file changed, 38 insertions(+), 20 deletions(-)