From patchwork Wed Jun 19 09:47:19 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Maxime Ripard X-Patchwork-Id: 1118597 Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=bootlin.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 45TKrt2Z6xz9sNC for ; Wed, 19 Jun 2019 19:48:30 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731554AbfFSJs3 (ORCPT ); Wed, 19 Jun 2019 05:48:29 -0400 Received: from relay12.mail.gandi.net ([217.70.178.232]:46295 "EHLO relay12.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731266AbfFSJs3 (ORCPT ); Wed, 19 Jun 2019 05:48:29 -0400 Received: from localhost (aaubervilliers-681-1-81-150.w90-88.abo.wanadoo.fr [90.88.23.150]) (Authenticated sender: maxime.ripard@bootlin.com) by relay12.mail.gandi.net (Postfix) with ESMTPSA id F094C20001B; Wed, 19 Jun 2019 09:48:22 +0000 (UTC) From: Maxime Ripard To: Mark Rutland , Rob Herring , Frank Rowand , "David S . Miller" , Chen-Yu Tsai , Maxime Ripard Cc: Maxime Coquelin , Alexandre Torgue , netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, Maxime Chevallier , =?utf-8?q?Antoine_T=C3=A9nart?= , Andrew Lunn , Florian Fainelli , Heiner Kallweit Subject: [PATCH v3 10/16] dt-bindings: net: sun8i-emac: Convert the binding to a schemas Date: Wed, 19 Jun 2019 11:47:19 +0200 Message-Id: X-Mailer: git-send-email 2.21.0 In-Reply-To: <27aeb33cf5b896900d5d11bd6957eda268014f0c.1560937626.git-series.maxime.ripard@bootlin.com> References: <27aeb33cf5b896900d5d11bd6957eda268014f0c.1560937626.git-series.maxime.ripard@bootlin.com> MIME-Version: 1.0 Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Switch our Allwinner H3 EMAC controller binding to a YAML schema to enable the DT validation. Since that controller is based on a Synopsys IP, let's add the validation to that schemas with a bunch of conditionals. Signed-off-by: Maxime Ripard Reviewed-by: Rob Herring --- Changes from v2: - Switch to phy-connection-type instead of phy-mode - Change the delay enum to using multipleOf Changes from v1: - Add specific binding document --- Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml | 321 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- Documentation/devicetree/bindings/net/dwmac-sun8i.txt | 201 +--------------------------------------------- Documentation/devicetree/bindings/net/snps,dwmac.yaml | 15 +++- 3 files changed, 336 insertions(+), 201 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml delete mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml new file mode 100644 index 000000000000..6f68c7f5fc34 --- /dev/null +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -0,0 +1,321 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/allwinner,sun8i-a83t-gmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83t EMAC Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + compatible: + oneOf: + - const: allwinner,sun8i-a83t-emac + - const: allwinner,sun8i-h3-emac + - const: allwinner,sun8i-r40-emac + - const: allwinner,sun8i-v3s-emac + - const: allwinner,sun50i-a64-emac + - items: + - const: allwinner,sun50i-h6-emac + - const: allwinner,sun50i-a64-emac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + + clocks: + maxItems: 1 + + clock-names: + const: stmmaceth + + syscon: + $ref: /schemas/types.yaml#definitions/phandle + description: + Phandle to the device containing the EMAC or GMAC clock + register + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - phy-connection-type + - phy-handle + - syscon + +allOf: + - $ref: "snps,dwmac.yaml#" + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac + + then: + properties: + allwinner,tx-delay-ps: + default: 0 + minimum: 0 + maximum: 700 + multipleOf: 100 + description: + External RGMII PHY TX clock delay chain value in ps. + + allwinner,rx-delay-ps: + default: 0 + minimum: 0 + maximum: 3100 + multipleOf: 100 + description: + External RGMII PHY TX clock delay chain value in ps. + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-r40-emac + + then: + properties: + allwinner,rx-delay-ps: + default: 0 + minimum: 0 + maximum: 700 + multipleOf: 100 + description: + External RGMII PHY TX clock delay chain value in ps. + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-h3-emac + - allwinner,sun8i-v3s-emac + + then: + properties: + allwinner,leds-active-low: + $ref: /schemas/types.yaml#definitions/flag + description: + EPHY LEDs are active low. + + mdio-mux: + type: object + + properties: + compatible: + const: allwinner,sun8i-h3-mdio-mux + + mdio-parent-bus: + $ref: /schemas/types.yaml#definitions/phandle + description: + Phandle to EMAC MDIO. + + mdio@1: + type: object + description: Internal MDIO Bus + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + compatible: + const: allwinner,sun8i-h3-mdio-internal + + reg: + const: 1 + + patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + description: + Integrated PHY node + + properties: + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + required: + - clocks + - resets + + + mdio@2: + type: object + description: External MDIO Bus (H3 only) + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + const: 2 + + required: + - compatible + - mdio-parent-bus + - mdio@1 + +examples: + - | + ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <0 82 1>; + interrupt-names = "macirq"; + resets = <&ccu 12>; + reset-names = "stmmaceth"; + clocks = <&ccu 27>; + clock-names = "stmmaceth"; + + phy-handle = <&int_mii_phy>; + phy-connection-type = "mii"; + allwinner,leds-active-low; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio1>; + + int_mii_phy: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <1>; + clocks = <&ccu 67>; + resets = <&ccu 39>; + phy-is-integrated; + }; + }; + + mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + - | + ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <0 82 1>; + interrupt-names = "macirq"; + resets = <&ccu 12>; + reset-names = "stmmaceth"; + clocks = <&ccu 27>; + clock-names = "stmmaceth"; + + phy-handle = <&ext_rgmii_phy>; + phy-connection-type = "rgmii"; + allwinner,leds-active-low; + + mdio2: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + mdio-parent-bus = <&mdio2>; + + mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <1>; + clocks = <&ccu 67>; + resets = <&ccu 39>; + }; + }; + + mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ext_rgmii_phy: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + }; + + - | + ethernet@1c0b000 { + compatible = "allwinner,sun8i-a83t-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <0 82 1>; + interrupt-names = "macirq"; + resets = <&ccu 13>; + reset-names = "stmmaceth"; + clocks = <&ccu 27>; + clock-names = "stmmaceth"; + phy-handle = <&ext_rgmii_phy1>; + phy-connection-type = "rgmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ext_rgmii_phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt deleted file mode 100644 index 54c66d0611cb..000000000000 --- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt +++ /dev/null @@ -1,201 +0,0 @@ -* Allwinner sun8i GMAC ethernet controller - -This device is a platform glue layer for stmmac. -Please see stmmac.txt for the other unchanged properties. - -Required properties: -- compatible: must be one of the following string: - "allwinner,sun8i-a83t-emac" - "allwinner,sun8i-h3-emac" - "allwinner,sun8i-r40-gmac" - "allwinner,sun8i-v3s-emac" - "allwinner,sun50i-a64-emac" - "allwinner,sun50i-h6-emac", "allwinner-sun50i-a64-emac" -- reg: address and length of the register for the device. -- interrupts: interrupt for the device -- interrupt-names: must be "macirq" -- clocks: A phandle to the reference clock for this device -- clock-names: must be "stmmaceth" -- resets: A phandle to the reset control for this device -- reset-names: must be "stmmaceth" -- phy-mode: See ethernet.txt -- phy-handle: See ethernet.txt -- syscon: A phandle to the device containing the EMAC or GMAC clock register - -Optional properties: -- allwinner,tx-delay-ps: TX clock delay chain value in ps. - Range is 0-700. Default is 0. - Unavailable for allwinner,sun8i-r40-gmac -- allwinner,rx-delay-ps: RX clock delay chain value in ps. - Range is 0-3100. Default is 0. - Range is 0-700 for allwinner,sun8i-r40-gmac -Both delay properties need to be a multiple of 100. They control the -clock delay for external RGMII PHY. They do not apply to the internal -PHY or external non-RGMII PHYs. - -Optional properties for the following compatibles: - - "allwinner,sun8i-h3-emac", - - "allwinner,sun8i-v3s-emac": -- allwinner,leds-active-low: EPHY LEDs are active low - -Required child node of emac: -- mdio bus node: should be named mdio with compatible "snps,dwmac-mdio" - -Required properties of the mdio node: -- #address-cells: shall be 1 -- #size-cells: shall be 0 - -The device node referenced by "phy" or "phy-handle" must be a child node -of the mdio node. See phy.txt for the generic PHY bindings. - -The following compatibles require that the emac node have a mdio-mux child -node called "mdio-mux": - - "allwinner,sun8i-h3-emac" - - "allwinner,sun8i-v3s-emac": -Required properties for the mdio-mux node: - - compatible = "allwinner,sun8i-h3-mdio-mux" - - mdio-parent-bus: a phandle to EMAC mdio - - one child mdio for the integrated mdio with the compatible - "allwinner,sun8i-h3-mdio-internal" - - one child mdio for the external mdio if present (V3s have none) -Required properties for the mdio-mux children node: - - reg: 1 for internal MDIO bus, 2 for external MDIO bus - -The following compatibles require a PHY node representing the integrated -PHY, under the integrated MDIO bus node if an mdio-mux node is used: - - "allwinner,sun8i-h3-emac", - - "allwinner,sun8i-v3s-emac": - -Additional information regarding generic multiplexer properties can be found -at Documentation/devicetree/bindings/net/mdio-mux.txt - -Required properties of the integrated phy node: -- clocks: a phandle to the reference clock for the EPHY -- resets: a phandle to the reset control for the EPHY -- Must be a child of the integrated mdio - -Example with integrated PHY: -emac: ethernet@1c0b000 { - compatible = "allwinner,sun8i-h3-emac"; - syscon = <&syscon>; - reg = <0x01c0b000 0x104>; - interrupts = ; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; - - mdio-mux { - compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux"; - #address-cells = <1>; - #size-cells = <0>; - - mdio-parent-bus = <&mdio>; - - int_mdio: mdio@1 { - compatible = "allwinner,sun8i-h3-mdio-internal"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - int_mii_phy: ethernet-phy@1 { - reg = <1>; - clocks = <&ccu CLK_BUS_EPHY>; - resets = <&ccu RST_BUS_EPHY>; - phy-is-integrated; - }; - }; - ext_mdio: mdio@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -Example with external PHY: -emac: ethernet@1c0b000 { - compatible = "allwinner,sun8i-h3-emac"; - syscon = <&syscon>; - reg = <0x01c0b000 0x104>; - interrupts = ; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - allwinner,leds-active-low; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; - - mdio-mux { - compatible = "allwinner,sun8i-h3-mdio-mux"; - #address-cells = <1>; - #size-cells = <0>; - - mdio-parent-bus = <&mdio>; - - int_mdio: mdio@1 { - compatible = "allwinner,sun8i-h3-mdio-internal"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - int_mii_phy: ethernet-phy@1 { - reg = <1>; - clocks = <&ccu CLK_BUS_EPHY>; - resets = <&ccu RST_BUS_EPHY>; - }; - }; - ext_mdio: mdio@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - ext_rgmii_phy: ethernet-phy@1 { - reg = <1>; - }; - }: - }; -}; - -Example with SoC without integrated PHY - -emac: ethernet@1c0b000 { - compatible = "allwinner,sun8i-a83t-emac"; - syscon = <&syscon>; - reg = <0x01c0b000 0x104>; - interrupts = ; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - - mdio: mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - ext_rgmii_phy: ethernet-phy@1 { - reg = <1>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index fed623a81dcd..956308806c33 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -45,6 +45,11 @@ properties: contains: enum: - allwinner,sun7i-a20-gmac + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-r40-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac - snps,dwmac - snps,dwmac-3.50a - snps,dwmac-3.610 @@ -267,6 +272,11 @@ allOf: contains: enum: - allwinner,sun7i-a20-gmac + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-r40-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac - snps,dwxgmac - snps,dwxgmac-2.10 - st,spear600-gmac @@ -308,6 +318,11 @@ allOf: contains: enum: - allwinner,sun7i-a20-gmac + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-r40-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac - snps,dwmac-4.00 - snps,dwmac-4.10a - snps,dwxgmac