[V6,22/27] dt-bindings: pci: tegra: Document PCIe DPD pinctrl optional prop
diff mbox series

Message ID 20190618180206.4908-23-mmaddireddy@nvidia.com
State New
Headers show
  • Enable Tegra PCIe root port features
Related show

Commit Message

Manikanta Maddireddy June 18, 2019, 6:02 p.m. UTC
Document PCIe DPD pinctrl optional property to put PEX clk & BIAS pads
in low power mode.

Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
V6: No change

V5: No change

V4: No change

V3: No change

V2: Using standard pinctrl names, default and idle

 .../devicetree/bindings/pci/nvidia,tegra20-pcie.txt       | 8 ++++++++
 1 file changed, 8 insertions(+)

diff mbox series

diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
index 145a4f04194f..7939bca47861 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -65,6 +65,14 @@  Required properties:
   - afi
   - pcie_x
+Optional properties:
+- pinctrl-names: A list of pinctrl state names. Must contain the following
+  entries:
+  - "default": active state, puts PCIe I/O out of deep power down state
+  - "idle": puts PCIe I/O into deep power down state
+- pinctrl-0: phandle for the default/active state of pin configurations.
+- pinctrl-1: phandle for the idle state of pin configurations.
 Required properties on Tegra124 and later (deprecated):
 - phys: Must contain an entry for each entry in phy-names.
 - phy-names: Must include the following entries: