Patchwork [U-Boot,v2,04/16] ARM: remove broken "lpd7a40x" boards

login
register
mail settings
Submitter Wolfgang Denk
Date Aug. 26, 2011, 12:25 p.m.
Message ID <1314361548-18566-5-git-send-email-wd@denx.de>
Download mbox | patch
Permalink /patch/111750/
State Accepted
Commit 957731eda0fe7610de93f73ef54686a618dbc605
Delegated to: Albert ARIBAUD
Headers show

Comments

Wolfgang Denk - Aug. 26, 2011, 12:25 p.m.
Remove lpd7a400 and lpd7a404 boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 MAKEALL                        |    1 -
 board/lpd7a40x/Makefile        |   51 ----
 board/lpd7a40x/config.mk       |   38 ---
 board/lpd7a40x/flash.c         |  490 ----------------------------------------
 board/lpd7a40x/lowlevel_init.S |  212 -----------------
 board/lpd7a40x/lpd7a40x.c      |   93 --------
 boards.cfg                     |    2 -
 doc/README.scrapyard           |    1 +
 include/configs/lpd7a400-10.h  |   80 -------
 include/configs/lpd7a400.h     |  117 ----------
 include/configs/lpd7a404-10.h  |   80 -------
 include/configs/lpd7a404.h     |  117 ----------
 12 files changed, 1 insertions(+), 1281 deletions(-)
 delete mode 100644 board/lpd7a40x/Makefile
 delete mode 100644 board/lpd7a40x/config.mk
 delete mode 100644 board/lpd7a40x/flash.c
 delete mode 100644 board/lpd7a40x/lowlevel_init.S
 delete mode 100644 board/lpd7a40x/lpd7a40x.c
 delete mode 100644 include/configs/lpd7a400-10.h
 delete mode 100644 include/configs/lpd7a400.h
 delete mode 100644 include/configs/lpd7a404-10.h
 delete mode 100644 include/configs/lpd7a404.h

Patch

diff --git a/MAKEALL b/MAKEALL
index 289cd8b..1f6baba 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -323,7 +323,6 @@  LIST_ARM9="			\
 	imx27lite		\
 	jadecpu			\
 	km_kirkwood		\
-	lpd7a400		\
 	magnesium		\
 	mv88f6281gtw_ge		\
 	mx1ads			\
diff --git a/board/lpd7a40x/Makefile b/board/lpd7a40x/Makefile
deleted file mode 100644
index 3aeb2fb..0000000
--- a/board/lpd7a40x/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@ 
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= lpd7a40x.o flash.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/lpd7a40x/config.mk b/board/lpd7a40x/config.mk
deleted file mode 100644
index 003e707..0000000
--- a/board/lpd7a40x/config.mk
+++ /dev/null
@@ -1,38 +0,0 @@ 
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# Logic ZOOM LH7A400 SDK board w/Logic LH7A400-10 card engine
-# w/Sharp LH7A400 SoC (ARM920T) cpu
-#
-
-#
-# 32 or 64 MB SDRAM on SDCSC0 @ 0xc0000000
-#
-# Linux-Kernel is @ 0xC0008000, entry 0xc0008000
-# params @ 0xc0000100
-# optionally with a ramdisk at 0xc0300000
-#
-# we load ourself to 0xc1fc0000 (32M - 256K)
-#
-# download area is 0xc0f00000
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc1fc0000
-#CONFIG_SYS_TEXT_BASE = 0x00000000
diff --git a/board/lpd7a40x/flash.c b/board/lpd7a40x/flash.c
deleted file mode 100644
index f5c0713..0000000
--- a/board/lpd7a40x/flash.c
+++ /dev/null
@@ -1,490 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <environment.h>
-
-#define FLASH_BANK_SIZE 0x1000000	/* 16MB (2 x 8 MB) */
-#define MAIN_SECT_SIZE  0x40000		/* 256KB (2 x 128kB) */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-#define CMD_READ_ARRAY		0x00FF00FF
-#define CMD_IDENTIFY		0x00900090
-#define CMD_ERASE_SETUP		0x00200020
-#define CMD_ERASE_CONFIRM	0x00D000D0
-#define CMD_PROGRAM		0x00400040
-#define CMD_RESUME		0x00D000D0
-#define CMD_SUSPEND		0x00B000B0
-#define CMD_STATUS_READ		0x00700070
-#define CMD_STATUS_RESET	0x00500050
-
-#define BIT_BUSY		0x00800080
-#define BIT_ERASE_SUSPEND	0x00400040
-#define BIT_ERASE_ERROR		0x00200020
-#define BIT_PROGRAM_ERROR	0x00100010
-#define BIT_VPP_RANGE_ERROR	0x00080008
-#define BIT_PROGRAM_SUSPEND	0x00040004
-#define BIT_PROTECT_ERROR	0x00020002
-#define BIT_UNDEFINED		0x00010001
-
-#define BIT_SEQUENCE_ERROR	0x00300030
-#define BIT_TIMEOUT		0x80000000
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
-	int i, j;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		ulong flashbase = 0;
-
-		flash_info[i].flash_id =
-			(INTEL_MANUFACT     & FLASH_VENDMASK) |
-			(INTEL_ID_28F640J3A & FLASH_TYPEMASK);
-		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-		if (i == 0)
-			flashbase = CONFIG_SYS_FLASH_BASE;
-		else
-			panic ("configured too many flash banks!\n");
-		for (j = 0; j < flash_info[i].sector_count; j++) {
-			flash_info[i].start[j] = flashbase;
-
-			/* uniform sector size */
-			flashbase += MAIN_SECT_SIZE;
-		}
-		size += flash_info[i].size;
-	}
-
-	/*
-	 * Protect monitor and environment sectors
-	 */
-	flash_protect ( FLAG_PROTECT_SET,
-			CONFIG_SYS_FLASH_BASE,
-			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
-			&flash_info[0]);
-
-	flash_protect ( FLAG_PROTECT_SET,
-			CONFIG_ENV_ADDR,
-			CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, &flash_info[0]);
-
-#ifdef CONFIG_ENV_ADDR_REDUND
-	flash_protect ( FLAG_PROTECT_SET,
-			CONFIG_ENV_ADDR_REDUND,
-			CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
-			&flash_info[0]);
-#endif
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case (INTEL_MANUFACT & FLASH_VENDMASK):
-		printf ("Intel: ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case (INTEL_ID_28F640J3A & FLASH_TYPEMASK):
-		printf ("2x 28F640J3A (64Mbit)\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		return;
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; i++) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_error (ulong code)
-{
-	/* Check bit patterns */
-	/* SR.7=0 is busy, SR.7=1 is ready */
-	/* all other flags indicate error on 1 */
-	/* SR.0 is undefined */
-	/* Timeout is our faked flag */
-
-	/* sequence is described in Intel 290644-005 document */
-
-	/* check Timeout */
-	if (code & BIT_TIMEOUT) {
-		puts ("Timeout\n");
-		return ERR_TIMOUT;
-	}
-
-	/* check Busy, SR.7 */
-	if (~code & BIT_BUSY) {
-		puts ("Busy\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* check Vpp low, SR.3 */
-	if (code & BIT_VPP_RANGE_ERROR) {
-		puts ("Vpp range error\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* check Device Protect Error, SR.1 */
-	if (code & BIT_PROTECT_ERROR) {
-		puts ("Device protect error\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* check Command Seq Error, SR.4 & SR.5 */
-	if (code & BIT_SEQUENCE_ERROR) {
-		puts ("Command seqence error\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* check Block Erase Error, SR.5 */
-	if (code & BIT_ERASE_ERROR) {
-		puts ("Block erase error\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* check Program Error, SR.4 */
-	if (code & BIT_PROGRAM_ERROR) {
-		puts ("Program error\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* check Block Erase Suspended, SR.6 */
-	if (code & BIT_ERASE_SUSPEND) {
-		puts ("Block erase suspended\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* check Program Suspended, SR.2 */
-	if (code & BIT_PROGRAM_SUSPEND) {
-		puts ("Program suspended\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* OK, no error */
-	return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	ulong result, result1;
-	int iflag, prot, sect;
-	int rc = ERR_OK;
-	ulong start;
-
-#ifdef USE_920T_MMU
-	int cflag;
-#endif
-
-	debug ("flash_erase: s_first %d  s_last %d\n", s_first, s_last);
-
-	/* first look for protection bits */
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return ERR_UNKNOWN_FLASH_TYPE;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		return ERR_INVAL;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) !=
-		(INTEL_MANUFACT & FLASH_VENDMASK)) {
-		return ERR_UNKNOWN_FLASH_VENDOR;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-#ifdef USE_920T_MMU
-	cflag = dcache_status ();
-	dcache_disable ();
-#endif
-	iflag = disable_interrupts ();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-
-		debug ("Erasing sector %2d @ %08lX... ",
-			sect, info->start[sect]);
-
-		/* arm simple, non interrupt dependent timer */
-		start = get_timer(0);
-
-		if (info->protect[sect] == 0) {	/* not protected */
-			vu_long *addr = (vu_long *) (info->start[sect]);
-			ulong bsR7, bsR7_2, bsR5, bsR5_2;
-
-			/* *addr = CMD_STATUS_RESET; */
-			*addr = CMD_ERASE_SETUP;
-			*addr = CMD_ERASE_CONFIRM;
-
-			/* wait until flash is ready */
-			do {
-				/* check timeout */
-				if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					*addr = CMD_STATUS_RESET;
-					result = BIT_TIMEOUT;
-					break;
-				}
-
-				*addr = CMD_STATUS_READ;
-				result = *addr;
-				bsR7 = result & (1 << 7);
-				bsR7_2 = result & (1 << 23);
-			} while (!bsR7 | !bsR7_2);
-
-			*addr = CMD_STATUS_READ;
-			result1 = *addr;
-			bsR5 = result1 & (1 << 5);
-			bsR5_2 = result1 & (1 << 21);
-#ifdef SAMSUNG_FLASH_DEBUG
-			printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
-			if (bsR5 != 0 && bsR5_2 != 0)
-				printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
-#endif
-
-			*addr = CMD_READ_ARRAY;
-			*addr = CMD_RESUME;
-
-			if ((rc = flash_error (result)) != ERR_OK)
-				goto outahere;
-#if 0
-			printf ("ok.\n");
-		} else {		/* it was protected */
-
-			printf ("protected!\n");
-#endif
-		}
-	}
-
-outahere:
-	/* allow flash to settle - wait 10 ms */
-	udelay_masked (10000);
-
-	if (iflag)
-		enable_interrupts ();
-
-#ifdef USE_920T_MMU
-	if (cflag)
-		dcache_enable ();
-#endif
-	return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long *) dest;
-	ulong result;
-	int rc = ERR_OK;
-	int iflag;
-	ulong start;
-
-#ifdef USE_920T_MMU
-	int cflag;
-#endif
-
-	/*
-	 * Check if Flash is (sufficiently) erased
-	 */
-	result = *addr;
-	if ((result & data) != data)
-		return ERR_NOT_ERASED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-#ifdef USE_920T_MMU
-	cflag = dcache_status ();
-	dcache_disable ();
-#endif
-	iflag = disable_interrupts ();
-
-	/* *addr = CMD_STATUS_RESET; */
-	*addr = CMD_PROGRAM;
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait until flash is ready */
-	do {
-		/* check timeout */
-		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			*addr = CMD_SUSPEND;
-			result = BIT_TIMEOUT;
-			break;
-		}
-
-		*addr = CMD_STATUS_READ;
-		result = *addr;
-	} while (~result & BIT_BUSY);
-
-	/* *addr = CMD_READ_ARRAY; */
-	*addr = CMD_STATUS_READ;
-	result = *addr;
-
-	rc = flash_error (result);
-
-	if (iflag)
-		enable_interrupts ();
-
-#ifdef USE_920T_MMU
-	if (cflag)
-		dcache_enable ();
-#endif
-	*addr = CMD_READ_ARRAY;
-	*addr = CMD_RESUME;
-	return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int l;
-	int i, rc;
-
-	wp = (addr & ~3);			/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *) cp << 24);
-		}
-		for (; i < 4 && cnt > 0; ++i) {
-			data = (data >> 8) | (*src++ << 24);
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < 4; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *) cp << 24);
-		}
-
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = *((vu_long *) src);
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 4;
-		wp += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return ERR_OK;
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
-		data = (data >> 8) | (*src++ << 24);
-		--cnt;
-	}
-	for (; i < 4; ++i, ++cp) {
-		data = (data >> 8) | (*(uchar *) cp << 24);
-	}
-
-	return write_word (info, wp, data);
-}
diff --git a/board/lpd7a40x/lowlevel_init.S b/board/lpd7a40x/lowlevel_init.S
deleted file mode 100644
index de34fc6..0000000
--- a/board/lpd7a40x/lowlevel_init.S
+++ /dev/null
@@ -1,212 +0,0 @@ 
-/*
- * Memory Setup - initialize memory controller(s) for devices required
- *                to boot and relocate
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* memory controller */
-#define BCRX_DEFAULT	(0x0000fbe0)
-#define BCRX_MW_8	(0x00000000)
-#define BCRX_MW_16	(0x10000000)
-#define BCRX_MW_32	(0x20000000)
-#define BCRX_PME	(0x08000000)
-#define BCRX_WP		(0x04000000)
-#define BCRX_WST2_SHIFT	(11)
-#define BCRX_WST1_SHIFT	(5)
-#define BCRX_IDCY_SHIFT	(0)
-
-/* Bank0 Async Flash */
-#define BCR0		(0x80002000)
-#define BCR0_FLASH	(BCRX_MW_32 | (0x08<<BCRX_WST2_SHIFT) | (0x0E<<BCRX_WST1_SHIFT))
-
-/* Bank1 Open */
-#define BCR1	(0x80002004)
-
-/* Bank2 Not used (EEPROM?) */
-#define BCR2	(0x80002008)
-
-/* Bank3 Not used */
-#define BCR3	(0x8000200C)
-
-/* Bank4 PC Card1 */
-
-/* Bank5 PC Card2 */
-
-/* Bank6 CPLD IO Controller Peripherals (slow) */
-#define BCR6		(0x80002018)
-#define BCR6_CPLD_SLOW	(BCRX_DEFAULT | BCRX_MW_16)
-
-/* Bank7 CPLD IO Controller Peripherals (fast) */
-#define BCR7		(0x8000201C)
-#define BCR7_CPLD_FAST	(BCRX_MW_16 | (0x16<<BCRX_WST2_SHIFT) | (0x16<<BCRX_WST1_SHIFT) | (0x2<<BCRX_IDCY_SHIFT))
-
-/* SDRAM */
-#define GBLCNFG		(0x80002404)
-#define GC_CKE		(0x80000000)
-#define GC_CKSD		(0x40000000)
-#define GC_LCR		(0x00000040)
-#define GC_SMEMBURST	(0x00000020)
-#define GC_MRS		(0x00000002)
-#define GC_INIT		(0x00000001)
-
-#define GC_CMD_NORMAL		(GC_CKE)
-#define GC_CMD_MODE		(GC_CKE | GC_MRS)
-#define GC_CMD_SYNCFLASH_LOAD	(GC_CKE | GC_MRS | GC_LCR)
-#define GC_CMD_PRECHARGEALL	(GC_CKE | GC_INIT)
-#define GC_CMD_NOP		(GC_CKE | GC_INIT | GC_MRS)
-
-#define RFSHTMR		(0x80002408)
-#define RFSHTMR_INIT	(10)	/* period=100 ns, HCLK=100Mhz, (2048+1-15.6*66) */
-#define RFSHTMR_NORMAL	(1500)	/* period=15.6 us, HCLK=100Mhz, (2048+1-15.6*66) */
-
-#define SDCSCX_BASE		(0x80002410)
-#define SDCSCX_DEFAULT		(0x01220008)
-#define SDCSCX_AUTOPC		(0x01000000)
-#define SDCSCX_RAS2CAS_2	(0x00200000)
-#define SDCSCX_RAS2CAS_3	(0x00300000)
-#define SDCSCX_WBL		(0x00080000)
-#define SDCSCX_CASLAT_8		(0x00070000)
-#define SDCSCX_CASLAT_7		(0x00060000)
-#define SDCSCX_CASLAT_6		(0x00050000)
-#define SDCSCX_CASLAT_5		(0x00040000)
-#define SDCSCX_CASLAT_4		(0x00030000)
-#define SDCSCX_CASLAT_3		(0x00020000)
-#define SDCSCX_CASLAT_2		(0x00010000)
-#define SDCSCX_2KPAGE		(0x00000040)
-#define SDCSCX_SROMLL		(0x00000020)
-#define SDCSCX_SROM512		(0x00000010)
-#define SDCSCX_4BNK		(0x00000008)
-#define SDCSCX_2BNK		(0x00000000)
-#define SDCSCX_EBW_16		(0x00000004)
-#define SDCSCX_EBW_32		(0x00000000)
-
-#define SDRAM_BASE		(0xC0000000)
-#define SDCSC_BANK_OFFSET	(0x10000000)
-
-/*
- * The SDRAM DEVICE MODE PROGRAMMING VALUE
- */
-#define BURST_LENGTH_4		(2 << 10)
-#define BURST_LENGTH_8		(3 << 10)
-#define WBURST_LENGTH_BL	(0 << 19)
-#define WBURST_LENGTH_SINGLE	(1 << 19)
-#define CAS_2			(2 << 14)
-#define CAS_3			(3 << 14)
-#define BAT_SEQUENTIAL		(0 << 13)
-#define BAT_INTERLEAVED		(1 << 13)
-#define OPM_NORMAL		(0 << 17)
-#define SDRAM_DEVICE_MODE	(WBURST_LENGTH_BL|OPM_NORMAL|CAS_3|BAT_SEQUENTIAL|BURST_LENGTH_4)
-
-
-#define TIMER1_BASE	(0x80000C00)
-
-/*
- * special lookup flags
- */
-#define DO_MEM_DELAY	1
-#define DO_MEM_READ	2
-
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
-.globl lowlevel_init
-lowlevel_init:
-	mov	r9, lr	@ save return address
-
-	/* memory control configuration */
-	/* make r0 relative the current location so that it */
-	/* reads INITMEM_DATA out of FLASH rather than memory ! */
-	/*   r0 = current word pointer */
-	/*   r1 = end word location, one word past last actual word */
-	/*   r3 = address for writes, special lookup flags */
-	/*   r4 = value for writes, delay constants, or read addresses */
-	/*   r2 = location for mem reads */
-
-	ldr	r0, =INITMEM_DATA
-	ldr	r1, _TEXT_BASE
-	sub	r0, r0, r1
-	add	r1, r0, #112
-
-mem_loop:
-	cmp	r1, r0
-	moveq	pc, r9		@ Done
-
-	ldr	r3, [r0], #4	@ Fetch Destination Register Address, or 1 for delay
-	ldr	r4, [r0], #4	@ value
-
-	cmp	r3, #DO_MEM_DELAY
-	bleq	mem_delay
-	beq	mem_loop
-	cmp	r3, #DO_MEM_READ
-	ldreq	r2, [r4]
-	beq	mem_loop
-	str	r4, [r3]	@ normal register/ram store
-	b	mem_loop
-
-mem_delay:
-	ldr	r5, =TIMER1_BASE
-	mov	r6, r4, LSR #1	@ timer resolution is ~2us
-	str	r6, [r5]
-	mov	r6, #0x88	@ using 508.469KHz clock, enable
-	str	r6, [r5, #8]
-0:	ldr	r6, [r5, #4]	@ timer value
-	cmp	r6, #0
-	bne	0b
-	mov	r6, #0		@ disable timer
-	str	r6, [r5, #8]
-	mov	pc, lr
-
-	.ltorg
-/* the literal pools origin */
-
-INITMEM_DATA:
-	.word	BCR0
-	.word	BCR0_FLASH
-	.word	BCR6
-	.word	BCR6_CPLD_SLOW
-	.word	BCR7
-	.word	BCR7_CPLD_FAST
-	.word	SDCSCX_BASE
-	.word	(SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32)
-	.word	GBLCNFG
-	.word	GC_CMD_NOP
-	.word	DO_MEM_DELAY
-	.word	200
-	.word	GBLCNFG
-	.word	GC_CMD_PRECHARGEALL
-	.word	RFSHTMR
-	.word	RFSHTMR_INIT
-	.word	DO_MEM_DELAY
-	.word	8
-	.word	RFSHTMR
-	.word	RFSHTMR_NORMAL
-	.word	GBLCNFG
-	.word	GC_CMD_MODE
-	.word	DO_MEM_READ
-	.word	(SDRAM_BASE | SDRAM_DEVICE_MODE)
-	.word	GBLCNFG
-	.word	GC_CMD_NORMAL
-	.word	SDCSCX_BASE
-	.word	(SDCSCX_AUTOPC | SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32)
diff --git a/board/lpd7a40x/lpd7a40x.c b/board/lpd7a40x/lpd7a40x.c
deleted file mode 100644
index 437dad0..0000000
--- a/board/lpd7a40x/lpd7a40x.c
+++ /dev/null
@@ -1,93 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#if defined(CONFIG_LH7A400)
-#include <lh7a400.h>
-#elif defined(CONFIG_LH7A404)
-#include <lh7a404.h>
-#else
-#error "No CPU defined!"
-#endif
-#include <asm/mach-types.h>
-
-#include <lpd7a400_cpld.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* set up the I/O ports */
-
-	/* enable flash programming */
-	*(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_FLASH_REG)) |= FLASH_FPEN;
-
-	/* Auto wakeup, LCD disable, WLAN enable */
-	*(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_CECTL_REG)) &=
-		~(CECTL_AWKP|CECTL_LCDV|CECTL_WLPE);
-
-	/* Status LED 2 on (leds are active low) */
-	*(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_EXTGPIO_REG)) =
-		(EXTGPIO_STATUS1|EXTGPIO_GPIO1) & ~(EXTGPIO_STATUS2);
-
-#if defined(CONFIG_LH7A400)
-	/* arch number of Logic-Board - MACH_TYPE_LPD7A400 */
-	gd->bd->bi_arch_number = MACH_TYPE_LPD7A400;
-#elif defined(CONFIG_LH7A404)
-	/* arch number of Logic-Board - MACH_TYPE_LPD7A400 */
-	gd->bd->bi_arch_number = MACH_TYPE_LPD7A404;
-#endif
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xc0000100;
-
-	return 0;
-}
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC91111
-	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index 91bcee8..54ff361 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -212,8 +212,6 @@  actux4                       arm         ixp
 dvlhost                      arm         ixp
 ixdp425                      arm         ixp
 ixdpg425                     arm         ixp         ixdp425
-lpd7a400                     arm         lh7a40x     lpd7a40x
-lpd7a404                     arm         lh7a40x     lpd7a40x
 balloon3                     arm         pxa
 cerf250                      arm         pxa
 colibri_pxa270               arm         pxa
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 7bd445c..d6c47fa 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@  easily if here is something they might want to dig for...
 
 Board	Arch	CPU	removed	    Commit	last known maintainer/contact
 =============================================================================
+lpd7a404 arm	lh7a40x	-	  2011-07-17
 edb9301	arm	arm920t	-	  2011-07-17
 edb9302	arm	arm920t	-	  2011-07-17
 edb9302a arm	arm920t	-	  2011-07-17
diff --git a/include/configs/lpd7a400-10.h b/include/configs/lpd7a400-10.h
deleted file mode 100644
index 91bf1fa..0000000
--- a/include/configs/lpd7a400-10.h
+++ /dev/null
@@ -1,80 +0,0 @@ 
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Logic LH7A400-10 card engine
- */
-
-#ifndef __LPD7A400_10_H
-#define __LPD7A400_10_H
-
-
-#define CONFIG_ARM920T		1	/* arm920t core */
-#define CONFIG_LH7A40X		1	/* Sharp LH7A40x SoC family */
-#define CONFIG_LH7A400		1   /* Sharp LH7A400 S0C */
-
-/* The system clock PLL input frequency */
-#define CONFIG_SYS_CLK_FREQ		14745600   /* System Clock PLL Input (Hz) */
-
-/* ticks per second */
-#define CONFIG_SYS_HZ	(508469)
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_FLASH_BASE		0x00000000 /* Flash Bank #1 */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	(64)	/* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/*----------------------------------------------------------------------
- * Using SMC91C111 LAN chip
- *
- * Default IO base of chip is 0x300, Card Engine has this address lines
- * (LAN chip) tied to Vcc, so we just care about the chip select
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE	(0x70000000)
-#undef CONFIG_SMC_USE_32_BIT
-
-#endif  /* __LPD7A400_10_H */
diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h
deleted file mode 100644
index 06f3d7e..0000000
--- a/include/configs/lpd7a400.h
+++ /dev/null
@@ -1,117 +0,0 @@ 
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __LPD7A400_H_
-#define __LPD7A400_H_
-
-#define CONFIG_LPD7A400		/* Logic LH7A400 SDK */
-
-#undef CONFIG_USE_IRQ
-
-/*
- * This board uses the logic LH7A400-10 card engine
- */
-#include <configs/lpd7a400-10.h>
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * select serial console configuration
- */
-#define CONFIG_LH7A40X_SERIAL
-#define CONFIG_CONSOLE_UART2	/* UART2 LH7A40x for console */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_IPADDR		192.168.1.100
-#define CONFIG_NETMASK		255.255.1.0
-#define CONFIG_SERVERIP		192.168.1.1
-
-#define	CONFIG_TIMESTAMP	1	/* Print timestamp info for images */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#ifndef USE_920T_MMU
-    #define CONFIG_CMD_PING
-    #undef CONFIG_CMD_CACHE
-#else
-    #define CONFIG_CMD_DATE
-#endif
-
-
-#define CONFIG_BOOTDELAY	3
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT		"LPD7A400> "	/* Monitor Command Prompt	*/
-#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0xc0300000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0xc0500000	/* 2 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0xc0f00000	/* default load address	*/
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/* size and location of u-boot in flash */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(256<<10)
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-
-/* Address and size of Primary Environment Sector	*/
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0xFC0000)
-#define CONFIG_ENV_SIZE		0x40000
-
-#endif  /* __LPD7A400_H_ */
diff --git a/include/configs/lpd7a404-10.h b/include/configs/lpd7a404-10.h
deleted file mode 100644
index b10e69d..0000000
--- a/include/configs/lpd7a404-10.h
+++ /dev/null
@@ -1,80 +0,0 @@ 
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Logic LH7A400-10 card engine
- */
-
-#ifndef __LPD7A404_10_H
-#define __LPD7A404_10_H
-
-
-#define CONFIG_ARM920T		1	/* arm920t core */
-#define CONFIG_LH7A40X		1	/* Sharp LH7A40x SoC family */
-#define CONFIG_LH7A404		1   /* Sharp LH7A404 SoC */
-
-/* The system clock PLL input frequency */
-#define CONFIG_SYS_CLK_FREQ		14745600   /* System Clock PLL Input (Hz) */
-
-/* ticks per second */
-#define CONFIG_SYS_HZ	(508469)
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_FLASH_BASE		0x00000000 /* Flash Bank #1 */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	(64)	/* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/*----------------------------------------------------------------------
- * Using SMC91C111 LAN chip
- *
- * Default IO base of chip is 0x300, Card Engine has this address lines
- * (LAN chip) tied to Vcc, so we just care about the chip select
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE	(0x70000000)
-#undef CONFIG_SMC_USE_32_BIT
-
-#endif  /* __LPD7A404_10_H */
diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h
deleted file mode 100644
index 7535f62..0000000
--- a/include/configs/lpd7a404.h
+++ /dev/null
@@ -1,117 +0,0 @@ 
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __LPD7A404_H_
-#define __LPD7A404_H_
-
-#define CONFIG_LPD7A404		/* Logic LH7A400 SDK */
-
-#undef CONFIG_USE_IRQ
-
-/*
- * This board uses the logic LH7A404-10 card engine
- */
-#include <configs/lpd7a404-10.h>
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * select serial console configuration
- */
-#define CONFIG_LH7A40X_SERIAL
-#define CONFIG_CONSOLE_UART2	/* UART2 LH7A40x for console */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_IPADDR		192.168.1.100
-#define CONFIG_NETMASK		255.255.1.0
-#define CONFIG_SERVERIP		192.168.1.1
-
-#define	CONFIG_TIMESTAMP	1	/* Print timestamp info for images */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#ifndef USE_920T_MMU
-    #define CONFIG_CMD_PING
-    #undef CONFIG_CMD_CACHE
-#else
-    #define CONFIG_CMD_DATE
-#endif
-
-
-#define CONFIG_BOOTDELAY	3
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT		"LPD7A404> "	/* Monitor Command Prompt	*/
-#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0xc0300000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0xc0500000	/* 2 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0xc0f00000	/* default load address	*/
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/* size and location of u-boot in flash */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(256<<10)
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-
-/* Address and size of Primary Environment Sector	*/
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0xFC0000)
-#define CONFIG_ENV_SIZE		0x40000
-
-#endif  /* __LPD7A404_H_ */