diff mbox series

[PULL,3/3] vfio/common: Introduce vfio_set_irq_signaling helper

Message ID 156046164094.26543.10016703921328261988.stgit@gimli.home
State New
Headers show
Series [PULL,1/3] vfio/pci: Hide Resizable BAR capability | expand

Commit Message

Alex Williamson June 13, 2019, 9:34 p.m. UTC 
From: Eric Auger <eric.auger@redhat.com>

The code used to assign an interrupt index/subindex to an
eventfd is duplicated many times. Let's introduce an helper that
allows to set/unset the signaling for an ACTION_TRIGGER,
ACTION_MASK or ACTION_UNMASK action.

In the error message, we now use errno in case of any
VFIO_DEVICE_SET_IRQS ioctl failure.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---
 hw/vfio/common.c              |   78 +++++++++++++++
 hw/vfio/pci.c                 |  217 ++++++++++-------------------------------
 hw/vfio/platform.c            |   68 ++++---------
 include/hw/vfio/vfio-common.h |    2 
 4 files changed, 154 insertions(+), 211 deletions(-)

Comments

Peter Maydell July 2, 2019, 10:37 a.m. UTC | #1 
On Thu, 13 Jun 2019 at 22:51, Alex Williamson
<alex.williamson@redhat.com> wrote:
>
> From: Eric Auger <eric.auger@redhat.com>
>
> The code used to assign an interrupt index/subindex to an
> eventfd is duplicated many times. Let's introduce an helper that
> allows to set/unset the signaling for an ACTION_TRIGGER,
> ACTION_MASK or ACTION_UNMASK action.
>
> In the error message, we now use errno in case of any
> VFIO_DEVICE_SET_IRQS ioctl failure.
>
> Signed-off-by: Eric Auger <eric.auger@redhat.com>
> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
> Reviewed-by: Li Qiang <liq3ea@gmail.com>
> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

Hi; coverity reports (CID 1402196) a possible unchecked return value
in this code:


> @@ -592,26 +550,10 @@ static void vfio_msix_vector_release(PCIDevice *pdev, unsigned int nr)
>       * be re-asserted on unmask.  Nothing to do if already using QEMU mode.
>       */
>      if (vector->virq >= 0) {
> -        int argsz;
> -        struct vfio_irq_set *irq_set;
> -        int32_t *pfd;
> -
> -        argsz = sizeof(*irq_set) + sizeof(*pfd);
> -
> -        irq_set = g_malloc0(argsz);
> -        irq_set->argsz = argsz;
> -        irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
> -                         VFIO_IRQ_SET_ACTION_TRIGGER;
> -        irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
> -        irq_set->start = nr;
> -        irq_set->count = 1;
> -        pfd = (int32_t *)&irq_set->data;
> +        int32_t fd = event_notifier_get_fd(&vector->interrupt);
>
> -        *pfd = event_notifier_get_fd(&vector->interrupt);
> -
> -        ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
> -
> -        g_free(irq_set);
> +        vfio_set_irq_signaling(&vdev->vbasedev, VFIO_PCI_MSIX_IRQ_INDEX, nr,
> +                               VFIO_IRQ_SET_ACTION_TRIGGER, fd, NULL);

In vfp_msix_vector_release() we call vfio_set_irq_signaling(),
but we don't check the returned error value, whereas in the other
7 places we call the function we do check. Is there some missing
error handling here ?

thanks
-- PMM
Eric Auger July 2, 2019, 12:32 p.m. UTC | #2 
Hi Peter,

On 7/2/19 12:37 PM, Peter Maydell wrote:
> On Thu, 13 Jun 2019 at 22:51, Alex Williamson
> <alex.williamson@redhat.com> wrote:
>>
>> From: Eric Auger <eric.auger@redhat.com>
>>
>> The code used to assign an interrupt index/subindex to an
>> eventfd is duplicated many times. Let's introduce an helper that
>> allows to set/unset the signaling for an ACTION_TRIGGER,
>> ACTION_MASK or ACTION_UNMASK action.
>>
>> In the error message, we now use errno in case of any
>> VFIO_DEVICE_SET_IRQS ioctl failure.
>>
>> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
>> Reviewed-by: Li Qiang <liq3ea@gmail.com>
>> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
> 
> Hi; coverity reports (CID 1402196) a possible unchecked return value
> in this code:
> 
> 
>> @@ -592,26 +550,10 @@ static void vfio_msix_vector_release(PCIDevice *pdev, unsigned int nr)
>>       * be re-asserted on unmask.  Nothing to do if already using QEMU mode.
>>       */
>>      if (vector->virq >= 0) {
>> -        int argsz;
>> -        struct vfio_irq_set *irq_set;
>> -        int32_t *pfd;
>> -
>> -        argsz = sizeof(*irq_set) + sizeof(*pfd);
>> -
>> -        irq_set = g_malloc0(argsz);
>> -        irq_set->argsz = argsz;
>> -        irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
>> -                         VFIO_IRQ_SET_ACTION_TRIGGER;
>> -        irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
>> -        irq_set->start = nr;
>> -        irq_set->count = 1;
>> -        pfd = (int32_t *)&irq_set->data;
>> +        int32_t fd = event_notifier_get_fd(&vector->interrupt);
>>
>> -        *pfd = event_notifier_get_fd(&vector->interrupt);
>> -
>> -        ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
>> -
>> -        g_free(irq_set);
>> +        vfio_set_irq_signaling(&vdev->vbasedev, VFIO_PCI_MSIX_IRQ_INDEX, nr,
>> +                               VFIO_IRQ_SET_ACTION_TRIGGER, fd, NULL);
> 
> In vfp_msix_vector_release() we call vfio_set_irq_signaling(),
> but we don't check the returned error value, whereas in the other
> 7 places we call the function we do check. Is there some missing
> error handling here ?

the difference with the other calls is that we pass a NULL errp here so
we don't need to consume a potential error. Before the introduction of
vfio_set_irq_signaling we had an ioctl call whose returned value was not
tested either. So I think it properly translates what was done before.
It seems we are willingly not producing any error message in that case.
Alex, can you confirm?

Thanks

Eric
> 
> thanks
> -- PMM
>
Alex Williamson July 2, 2019, 3:55 p.m. UTC | #3 
On Tue, 2 Jul 2019 14:32:26 +0200
Auger Eric <eric.auger@redhat.com> wrote:

> Hi Peter,
> 
> On 7/2/19 12:37 PM, Peter Maydell wrote:
> > On Thu, 13 Jun 2019 at 22:51, Alex Williamson
> > <alex.williamson@redhat.com> wrote:  
> >>
> >> From: Eric Auger <eric.auger@redhat.com>
> >>
> >> The code used to assign an interrupt index/subindex to an
> >> eventfd is duplicated many times. Let's introduce an helper that
> >> allows to set/unset the signaling for an ACTION_TRIGGER,
> >> ACTION_MASK or ACTION_UNMASK action.
> >>
> >> In the error message, we now use errno in case of any
> >> VFIO_DEVICE_SET_IRQS ioctl failure.
> >>
> >> Signed-off-by: Eric Auger <eric.auger@redhat.com>
> >> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
> >> Reviewed-by: Li Qiang <liq3ea@gmail.com>
> >> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>  
> > 
> > Hi; coverity reports (CID 1402196) a possible unchecked return value
> > in this code:
> > 
> >   
> >> @@ -592,26 +550,10 @@ static void vfio_msix_vector_release(PCIDevice *pdev, unsigned int nr)
> >>       * be re-asserted on unmask.  Nothing to do if already using QEMU mode.
> >>       */
> >>      if (vector->virq >= 0) {
> >> -        int argsz;
> >> -        struct vfio_irq_set *irq_set;
> >> -        int32_t *pfd;
> >> -
> >> -        argsz = sizeof(*irq_set) + sizeof(*pfd);
> >> -
> >> -        irq_set = g_malloc0(argsz);
> >> -        irq_set->argsz = argsz;
> >> -        irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
> >> -                         VFIO_IRQ_SET_ACTION_TRIGGER;
> >> -        irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
> >> -        irq_set->start = nr;
> >> -        irq_set->count = 1;
> >> -        pfd = (int32_t *)&irq_set->data;
> >> +        int32_t fd = event_notifier_get_fd(&vector->interrupt);
> >>
> >> -        *pfd = event_notifier_get_fd(&vector->interrupt);
> >> -
> >> -        ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
> >> -
> >> -        g_free(irq_set);
> >> +        vfio_set_irq_signaling(&vdev->vbasedev, VFIO_PCI_MSIX_IRQ_INDEX, nr,
> >> +                               VFIO_IRQ_SET_ACTION_TRIGGER, fd, NULL);  
> > 
> > In vfp_msix_vector_release() we call vfio_set_irq_signaling(),
> > but we don't check the returned error value, whereas in the other
> > 7 places we call the function we do check. Is there some missing
> > error handling here ?  
> 
> the difference with the other calls is that we pass a NULL errp here so
> we don't need to consume a potential error. Before the introduction of
> vfio_set_irq_signaling we had an ioctl call whose returned value was not
> tested either. So I think it properly translates what was done before.
> It seems we are willingly not producing any error message in that case.
> Alex, can you confirm?

When we're emulating writes to the MSI-X vector table we have no
failure path up to the guest.  Real hardware cannot fail to enable a
vector that's available in hardware, thus we can either log the issue,
ignore the issue, or fault.  I guess Coverity is simply noting that
other cases are tested while this is not, therefore we should either
explicitly ignore the return value with a cast to void or take this as
an opportunity to log the fault, which might be useful in debugging a
device that isn't working properly.  Thanks,

Alex
Peter Maydell July 2, 2019, 3:58 p.m. UTC | #4 
On Tue, 2 Jul 2019 at 16:56, Alex Williamson <alex.williamson@redhat.com> wrote:
> When we're emulating writes to the MSI-X vector table we have no
> failure path up to the guest.  Real hardware cannot fail to enable a
> vector that's available in hardware, thus we can either log the issue,
> ignore the issue, or fault.  I guess Coverity is simply noting that
> other cases are tested while this is not, therefore we should either
> explicitly ignore the return value with a cast to void or take this as
> an opportunity to log the fault, which might be useful in debugging a
> device that isn't working properly.  Thanks,

Yeah, Coverity's check here is purely a heuristic ("did we seem
to check returns from this function in other places?") so it's
wrong sometimes. If you want me to mark this as a false positive
in the coverity UI I can do that.

thanks
-- PMM
Alex Williamson July 2, 2019, 4:30 p.m. UTC | #5 
On Tue, 2 Jul 2019 16:58:02 +0100
Peter Maydell <peter.maydell@linaro.org> wrote:

> On Tue, 2 Jul 2019 at 16:56, Alex Williamson <alex.williamson@redhat.com> wrote:
> > When we're emulating writes to the MSI-X vector table we have no
> > failure path up to the guest.  Real hardware cannot fail to enable a
> > vector that's available in hardware, thus we can either log the issue,
> > ignore the issue, or fault.  I guess Coverity is simply noting that
> > other cases are tested while this is not, therefore we should either
> > explicitly ignore the return value with a cast to void or take this as
> > an opportunity to log the fault, which might be useful in debugging a
> > device that isn't working properly.  Thanks,  
> 
> Yeah, Coverity's check here is purely a heuristic ("did we seem
> to check returns from this function in other places?") so it's
> wrong sometimes. If you want me to mark this as a false positive
> in the coverity UI I can do that.

TBH, it seems like a good nag to log it properly.  Eric, do you mind
posting a fix to do that?  Thanks,

Alex
Eric Auger July 2, 2019, 4:33 p.m. UTC | #6 
Hi,
On 7/2/19 6:30 PM, Alex Williamson wrote:
> On Tue, 2 Jul 2019 16:58:02 +0100
> Peter Maydell <peter.maydell@linaro.org> wrote:
> 
>> On Tue, 2 Jul 2019 at 16:56, Alex Williamson <alex.williamson@redhat.com> wrote:
>>> When we're emulating writes to the MSI-X vector table we have no
>>> failure path up to the guest.  Real hardware cannot fail to enable a
>>> vector that's available in hardware, thus we can either log the issue,
>>> ignore the issue, or fault.  I guess Coverity is simply noting that
>>> other cases are tested while this is not, therefore we should either
>>> explicitly ignore the return value with a cast to void or take this as
>>> an opportunity to log the fault, which might be useful in debugging a
>>> device that isn't working properly.  Thanks,  
>>
>> Yeah, Coverity's check here is purely a heuristic ("did we seem
>> to check returns from this function in other places?") so it's
>> wrong sometimes. If you want me to mark this as a false positive
>> in the coverity UI I can do that.
> 
> TBH, it seems like a good nag to log it properly.  Eric, do you mind
> posting a fix to do that?  Thanks,
Sure I will send a fix.

Thanks

Eric
> 
> Alex
>
diff mbox series

Patch

diff --git a/hw/vfio/common.c b/hw/vfio/common.c
index 4374cc6176a2..a859298fdad9 100644
--- a/hw/vfio/common.c
+++ b/hw/vfio/common.c
@@ -95,6 +95,84 @@  void vfio_mask_single_irqindex(VFIODevice *vbasedev, int index)
     ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set);
 }
 
+static inline const char *action_to_str(int action)
+{
+    switch (action) {
+    case VFIO_IRQ_SET_ACTION_MASK:
+        return "MASK";
+    case VFIO_IRQ_SET_ACTION_UNMASK:
+        return "UNMASK";
+    case VFIO_IRQ_SET_ACTION_TRIGGER:
+        return "TRIGGER";
+    default:
+        return "UNKNOWN ACTION";
+    }
+}
+
+static const char *index_to_str(VFIODevice *vbasedev, int index)
+{
+    if (vbasedev->type != VFIO_DEVICE_TYPE_PCI) {
+        return NULL;
+    }
+
+    switch (index) {
+    case VFIO_PCI_INTX_IRQ_INDEX:
+        return "INTX";
+    case VFIO_PCI_MSI_IRQ_INDEX:
+        return "MSI";
+    case VFIO_PCI_MSIX_IRQ_INDEX:
+        return "MSIX";
+    case VFIO_PCI_ERR_IRQ_INDEX:
+        return "ERR";
+    case VFIO_PCI_REQ_IRQ_INDEX:
+        return "REQ";
+    default:
+        return NULL;
+    }
+}
+
+int vfio_set_irq_signaling(VFIODevice *vbasedev, int index, int subindex,
+                           int action, int fd, Error **errp)
+{
+    struct vfio_irq_set *irq_set;
+    int argsz, ret = 0;
+    const char *name;
+    int32_t *pfd;
+
+    argsz = sizeof(*irq_set) + sizeof(*pfd);
+
+    irq_set = g_malloc0(argsz);
+    irq_set->argsz = argsz;
+    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | action;
+    irq_set->index = index;
+    irq_set->start = subindex;
+    irq_set->count = 1;
+    pfd = (int32_t *)&irq_set->data;
+    *pfd = fd;
+
+    if (ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, irq_set)) {
+        ret = -errno;
+    }
+    g_free(irq_set);
+
+    if (!ret) {
+        return 0;
+    }
+
+    error_setg_errno(errp, -ret, "VFIO_DEVICE_SET_IRQS failure");
+
+    name = index_to_str(vbasedev, index);
+    if (name) {
+        error_prepend(errp, "%s-%d: ", name, subindex);
+    } else {
+        error_prepend(errp, "index %d-%d: ", index, subindex);
+    }
+    error_prepend(errp,
+                  "Failed to %s %s eventfd signaling for interrupt ",
+                  fd < 0 ? "tear down" : "set up", action_to_str(action));
+    return ret;
+}
+
 /*
  * IO Port/MMIO - Beware of the endians, VFIO is always little endian
  */
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index 6520c05dee92..ce3fe96efe2c 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -114,9 +114,7 @@  static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev, Error **errp)
         .gsi = vdev->intx.route.irq,
         .flags = KVM_IRQFD_FLAG_RESAMPLE,
     };
-    struct vfio_irq_set *irq_set;
-    int ret, argsz;
-    int32_t *pfd;
+    Error *err = NULL;
 
     if (vdev->no_kvm_intx || !kvm_irqfds_enabled() ||
         vdev->intx.route.mode != PCI_INTX_ENABLED ||
@@ -144,22 +142,10 @@  static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev, Error **errp)
         goto fail_irqfd;
     }
 
-    argsz = sizeof(*irq_set) + sizeof(*pfd);
-
-    irq_set = g_malloc0(argsz);
-    irq_set->argsz = argsz;
-    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_UNMASK;
-    irq_set->index = VFIO_PCI_INTX_IRQ_INDEX;
-    irq_set->start = 0;
-    irq_set->count = 1;
-    pfd = (int32_t *)&irq_set->data;
-
-    *pfd = irqfd.resamplefd;
-
-    ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
-    g_free(irq_set);
-    if (ret) {
-        error_setg_errno(errp, -ret, "failed to setup INTx unmask fd");
+    if (vfio_set_irq_signaling(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX, 0,
+                               VFIO_IRQ_SET_ACTION_UNMASK,
+                               irqfd.resamplefd, &err)) {
+        error_propagate(errp, err);
         goto fail_vfio;
     }
 
@@ -263,10 +249,10 @@  static void vfio_intx_update(PCIDevice *pdev)
 static int vfio_intx_enable(VFIOPCIDevice *vdev, Error **errp)
 {
     uint8_t pin = vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1);
-    int ret, argsz, retval = 0;
-    struct vfio_irq_set *irq_set;
-    int32_t *pfd;
     Error *err = NULL;
+    int32_t fd;
+    int ret;
+
 
     if (!pin) {
         return 0;
@@ -293,27 +279,15 @@  static int vfio_intx_enable(VFIOPCIDevice *vdev, Error **errp)
         error_setg_errno(errp, -ret, "event_notifier_init failed");
         return ret;
     }
+    fd = event_notifier_get_fd(&vdev->intx.interrupt);
+    qemu_set_fd_handler(fd, vfio_intx_interrupt, NULL, vdev);
 
-    argsz = sizeof(*irq_set) + sizeof(*pfd);
-
-    irq_set = g_malloc0(argsz);
-    irq_set->argsz = argsz;
-    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER;
-    irq_set->index = VFIO_PCI_INTX_IRQ_INDEX;
-    irq_set->start = 0;
-    irq_set->count = 1;
-    pfd = (int32_t *)&irq_set->data;
-
-    *pfd = event_notifier_get_fd(&vdev->intx.interrupt);
-    qemu_set_fd_handler(*pfd, vfio_intx_interrupt, NULL, vdev);
-
-    ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
-    if (ret) {
-        error_setg_errno(errp, -ret, "failed to setup INTx fd");
-        qemu_set_fd_handler(*pfd, NULL, NULL, vdev);
+    if (vfio_set_irq_signaling(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX, 0,
+                               VFIO_IRQ_SET_ACTION_TRIGGER, fd, &err)) {
+        error_propagate(errp, err);
+        qemu_set_fd_handler(fd, NULL, NULL, vdev);
         event_notifier_cleanup(&vdev->intx.interrupt);
-        retval = -errno;
-        goto cleanup;
+        return -errno;
     }
 
     vfio_intx_enable_kvm(vdev, &err);
@@ -324,11 +298,7 @@  static int vfio_intx_enable(VFIOPCIDevice *vdev, Error **errp)
     vdev->interrupt = VFIO_INT_INTx;
 
     trace_vfio_intx_enable(vdev->vbasedev.name);
-
-cleanup:
-    g_free(irq_set);
-
-    return retval;
+    return 0;
 }
 
 static void vfio_intx_disable(VFIOPCIDevice *vdev)
@@ -531,31 +501,19 @@  static int vfio_msix_vector_do_use(PCIDevice *pdev, unsigned int nr,
             error_report("vfio: failed to enable vectors, %d", ret);
         }
     } else {
-        int argsz;
-        struct vfio_irq_set *irq_set;
-        int32_t *pfd;
-
-        argsz = sizeof(*irq_set) + sizeof(*pfd);
-
-        irq_set = g_malloc0(argsz);
-        irq_set->argsz = argsz;
-        irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
-                         VFIO_IRQ_SET_ACTION_TRIGGER;
-        irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
-        irq_set->start = nr;
-        irq_set->count = 1;
-        pfd = (int32_t *)&irq_set->data;
+        Error *err = NULL;
+        int32_t fd;
 
         if (vector->virq >= 0) {
-            *pfd = event_notifier_get_fd(&vector->kvm_interrupt);
+            fd = event_notifier_get_fd(&vector->kvm_interrupt);
         } else {
-            *pfd = event_notifier_get_fd(&vector->interrupt);
+            fd = event_notifier_get_fd(&vector->interrupt);
         }
 
-        ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
-        g_free(irq_set);
-        if (ret) {
-            error_report("vfio: failed to modify vector, %d", ret);
+        if (vfio_set_irq_signaling(&vdev->vbasedev,
+                                     VFIO_PCI_MSIX_IRQ_INDEX, nr,
+                                     VFIO_IRQ_SET_ACTION_TRIGGER, fd, &err)) {
+            error_reportf_err(err, VFIO_MSG_PREFIX, vdev->vbasedev.name);
         }
     }
 
@@ -592,26 +550,10 @@  static void vfio_msix_vector_release(PCIDevice *pdev, unsigned int nr)
      * be re-asserted on unmask.  Nothing to do if already using QEMU mode.
      */
     if (vector->virq >= 0) {
-        int argsz;
-        struct vfio_irq_set *irq_set;
-        int32_t *pfd;
-
-        argsz = sizeof(*irq_set) + sizeof(*pfd);
-
-        irq_set = g_malloc0(argsz);
-        irq_set->argsz = argsz;
-        irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
-                         VFIO_IRQ_SET_ACTION_TRIGGER;
-        irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
-        irq_set->start = nr;
-        irq_set->count = 1;
-        pfd = (int32_t *)&irq_set->data;
+        int32_t fd = event_notifier_get_fd(&vector->interrupt);
 
-        *pfd = event_notifier_get_fd(&vector->interrupt);
-
-        ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
-
-        g_free(irq_set);
+        vfio_set_irq_signaling(&vdev->vbasedev, VFIO_PCI_MSIX_IRQ_INDEX, nr,
+                               VFIO_IRQ_SET_ACTION_TRIGGER, fd, NULL);
     }
 }
 
@@ -2638,10 +2580,8 @@  static void vfio_err_notifier_handler(void *opaque)
  */
 static void vfio_register_err_notifier(VFIOPCIDevice *vdev)
 {
-    int ret;
-    int argsz;
-    struct vfio_irq_set *irq_set;
-    int32_t *pfd;
+    Error *err = NULL;
+    int32_t fd;
 
     if (!vdev->pci_aer) {
         return;
@@ -2653,58 +2593,30 @@  static void vfio_register_err_notifier(VFIOPCIDevice *vdev)
         return;
     }
 
-    argsz = sizeof(*irq_set) + sizeof(*pfd);
+    fd = event_notifier_get_fd(&vdev->err_notifier);
+    qemu_set_fd_handler(fd, vfio_err_notifier_handler, NULL, vdev);
 
-    irq_set = g_malloc0(argsz);
-    irq_set->argsz = argsz;
-    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
-                     VFIO_IRQ_SET_ACTION_TRIGGER;
-    irq_set->index = VFIO_PCI_ERR_IRQ_INDEX;
-    irq_set->start = 0;
-    irq_set->count = 1;
-    pfd = (int32_t *)&irq_set->data;
-
-    *pfd = event_notifier_get_fd(&vdev->err_notifier);
-    qemu_set_fd_handler(*pfd, vfio_err_notifier_handler, NULL, vdev);
-
-    ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
-    if (ret) {
-        error_report("vfio: Failed to set up error notification");
-        qemu_set_fd_handler(*pfd, NULL, NULL, vdev);
+    if (vfio_set_irq_signaling(&vdev->vbasedev, VFIO_PCI_ERR_IRQ_INDEX, 0,
+                               VFIO_IRQ_SET_ACTION_TRIGGER, fd, &err)) {
+        error_reportf_err(err, VFIO_MSG_PREFIX, vdev->vbasedev.name);
+        qemu_set_fd_handler(fd, NULL, NULL, vdev);
         event_notifier_cleanup(&vdev->err_notifier);
         vdev->pci_aer = false;
     }
-    g_free(irq_set);
 }
 
 static void vfio_unregister_err_notifier(VFIOPCIDevice *vdev)
 {
-    int argsz;
-    struct vfio_irq_set *irq_set;
-    int32_t *pfd;
-    int ret;
+    Error *err = NULL;
 
     if (!vdev->pci_aer) {
         return;
     }
 
-    argsz = sizeof(*irq_set) + sizeof(*pfd);
-
-    irq_set = g_malloc0(argsz);
-    irq_set->argsz = argsz;
-    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
-                     VFIO_IRQ_SET_ACTION_TRIGGER;
-    irq_set->index = VFIO_PCI_ERR_IRQ_INDEX;
-    irq_set->start = 0;
-    irq_set->count = 1;
-    pfd = (int32_t *)&irq_set->data;
-    *pfd = -1;
-
-    ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
-    if (ret) {
-        error_report("vfio: Failed to de-assign error fd: %m");
+    if (vfio_set_irq_signaling(&vdev->vbasedev, VFIO_PCI_ERR_IRQ_INDEX, 0,
+                               VFIO_IRQ_SET_ACTION_TRIGGER, -1, &err)) {
+        error_reportf_err(err, VFIO_MSG_PREFIX, vdev->vbasedev.name);
     }
-    g_free(irq_set);
     qemu_set_fd_handler(event_notifier_get_fd(&vdev->err_notifier),
                         NULL, NULL, vdev);
     event_notifier_cleanup(&vdev->err_notifier);
@@ -2729,9 +2641,8 @@  static void vfio_register_req_notifier(VFIOPCIDevice *vdev)
 {
     struct vfio_irq_info irq_info = { .argsz = sizeof(irq_info),
                                       .index = VFIO_PCI_REQ_IRQ_INDEX };
-    int argsz;
-    struct vfio_irq_set *irq_set;
-    int32_t *pfd;
+    Error *err = NULL;
+    int32_t fd;
 
     if (!(vdev->features & VFIO_FEATURE_ENABLE_REQ)) {
         return;
@@ -2747,57 +2658,31 @@  static void vfio_register_req_notifier(VFIOPCIDevice *vdev)
         return;
     }
 
-    argsz = sizeof(*irq_set) + sizeof(*pfd);
-
-    irq_set = g_malloc0(argsz);
-    irq_set->argsz = argsz;
-    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
-                     VFIO_IRQ_SET_ACTION_TRIGGER;
-    irq_set->index = VFIO_PCI_REQ_IRQ_INDEX;
-    irq_set->start = 0;
-    irq_set->count = 1;
-    pfd = (int32_t *)&irq_set->data;
-
-    *pfd = event_notifier_get_fd(&vdev->req_notifier);
-    qemu_set_fd_handler(*pfd, vfio_req_notifier_handler, NULL, vdev);
+    fd = event_notifier_get_fd(&vdev->req_notifier);
+    qemu_set_fd_handler(fd, vfio_req_notifier_handler, NULL, vdev);
 
-    if (ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set)) {
-        error_report("vfio: Failed to set up device request notification");
-        qemu_set_fd_handler(*pfd, NULL, NULL, vdev);
+    if (vfio_set_irq_signaling(&vdev->vbasedev, VFIO_PCI_REQ_IRQ_INDEX, 0,
+                           VFIO_IRQ_SET_ACTION_TRIGGER, fd, &err)) {
+        error_reportf_err(err, VFIO_MSG_PREFIX, vdev->vbasedev.name);
+        qemu_set_fd_handler(fd, NULL, NULL, vdev);
         event_notifier_cleanup(&vdev->req_notifier);
     } else {
         vdev->req_enabled = true;
     }
-
-    g_free(irq_set);
 }
 
 static void vfio_unregister_req_notifier(VFIOPCIDevice *vdev)
 {
-    int argsz;
-    struct vfio_irq_set *irq_set;
-    int32_t *pfd;
+    Error *err = NULL;
 
     if (!vdev->req_enabled) {
         return;
     }
 
-    argsz = sizeof(*irq_set) + sizeof(*pfd);
-
-    irq_set = g_malloc0(argsz);
-    irq_set->argsz = argsz;
-    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
-                     VFIO_IRQ_SET_ACTION_TRIGGER;
-    irq_set->index = VFIO_PCI_REQ_IRQ_INDEX;
-    irq_set->start = 0;
-    irq_set->count = 1;
-    pfd = (int32_t *)&irq_set->data;
-    *pfd = -1;
-
-    if (ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set)) {
-        error_report("vfio: Failed to de-assign device request fd: %m");
+    if (vfio_set_irq_signaling(&vdev->vbasedev, VFIO_PCI_REQ_IRQ_INDEX, 0,
+                               VFIO_IRQ_SET_ACTION_TRIGGER, -1, &err)) {
+        error_reportf_err(err, VFIO_MSG_PREFIX, vdev->vbasedev.name);
     }
-    g_free(irq_set);
     qemu_set_fd_handler(event_notifier_get_fd(&vdev->req_notifier),
                         NULL, NULL, vdev);
     event_notifier_cleanup(&vdev->req_notifier);
diff --git a/hw/vfio/platform.c b/hw/vfio/platform.c
index ad2972595574..622e609fb425 100644
--- a/hw/vfio/platform.c
+++ b/hw/vfio/platform.c
@@ -107,26 +107,19 @@  static int vfio_set_trigger_eventfd(VFIOINTp *intp,
                                     eventfd_user_side_handler_t handler)
 {
     VFIODevice *vbasedev = &intp->vdev->vbasedev;
-    struct vfio_irq_set *irq_set;
-    int argsz, ret;
-    int32_t *pfd;
-
-    argsz = sizeof(*irq_set) + sizeof(*pfd);
-    irq_set = g_malloc0(argsz);
-    irq_set->argsz = argsz;
-    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER;
-    irq_set->index = intp->pin;
-    irq_set->start = 0;
-    irq_set->count = 1;
-    pfd = (int32_t *)&irq_set->data;
-    *pfd = event_notifier_get_fd(intp->interrupt);
-    qemu_set_fd_handler(*pfd, (IOHandler *)handler, NULL, intp);
-    ret = ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, irq_set);
-    if (ret < 0) {
-        error_report("vfio: Failed to set trigger eventfd: %m");
-        qemu_set_fd_handler(*pfd, NULL, NULL, NULL);
-    }
-    g_free(irq_set);
+    int32_t fd = event_notifier_get_fd(intp->interrupt);
+    Error *err = NULL;
+    int ret;
+
+    qemu_set_fd_handler(fd, (IOHandler *)handler, NULL, intp);
+
+    ret = vfio_set_irq_signaling(vbasedev, intp->pin, 0,
+                                 VFIO_IRQ_SET_ACTION_TRIGGER, fd, &err);
+    if (ret) {
+        error_reportf_err(err, VFIO_MSG_PREFIX, vbasedev->name);
+        qemu_set_fd_handler(fd, NULL, NULL, NULL);
+    }
+
     return ret;
 }
 
@@ -331,7 +324,6 @@  static void vfio_platform_eoi(VFIODevice *vbasedev)
 
 static void vfio_start_eventfd_injection(SysBusDevice *sbdev, qemu_irq irq)
 {
-    int ret;
     VFIOPlatformDevice *vdev = VFIO_PLATFORM_DEVICE(sbdev);
     VFIOINTp *intp;
 
@@ -342,10 +334,7 @@  static void vfio_start_eventfd_injection(SysBusDevice *sbdev, qemu_irq irq)
     }
     assert(intp);
 
-    ret = vfio_set_trigger_eventfd(intp, vfio_intp_interrupt);
-    if (ret) {
-        error_report("vfio: failed to start eventfd signaling for IRQ %d: %m",
-                     intp->pin);
+    if (vfio_set_trigger_eventfd(intp, vfio_intp_interrupt)) {
         abort();
     }
 }
@@ -362,25 +351,16 @@  static void vfio_start_eventfd_injection(SysBusDevice *sbdev, qemu_irq irq)
  */
 static int vfio_set_resample_eventfd(VFIOINTp *intp)
 {
+    int32_t fd = event_notifier_get_fd(intp->unmask);
     VFIODevice *vbasedev = &intp->vdev->vbasedev;
-    struct vfio_irq_set *irq_set;
-    int argsz, ret;
-    int32_t *pfd;
-
-    argsz = sizeof(*irq_set) + sizeof(*pfd);
-    irq_set = g_malloc0(argsz);
-    irq_set->argsz = argsz;
-    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_UNMASK;
-    irq_set->index = intp->pin;
-    irq_set->start = 0;
-    irq_set->count = 1;
-    pfd = (int32_t *)&irq_set->data;
-    *pfd = event_notifier_get_fd(intp->unmask);
-    qemu_set_fd_handler(*pfd, NULL, NULL, NULL);
-    ret = ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, irq_set);
-    g_free(irq_set);
-    if (ret < 0) {
-        error_report("vfio: Failed to set resample eventfd: %m");
+    Error *err = NULL;
+    int ret;
+
+    qemu_set_fd_handler(fd, NULL, NULL, NULL);
+    ret = vfio_set_irq_signaling(vbasedev, intp->pin, 0,
+                                 VFIO_IRQ_SET_ACTION_UNMASK, fd, &err);
+    if (ret) {
+        error_reportf_err(err, VFIO_MSG_PREFIX, vbasedev->name);
     }
     return ret;
 }
@@ -436,8 +416,6 @@  static void vfio_start_irqfd_injection(SysBusDevice *sbdev, qemu_irq irq)
     return;
 fail_vfio:
     kvm_irqchip_remove_irqfd_notifier(kvm_state, intp->interrupt, irq);
-    error_report("vfio: failed to start eventfd signaling for IRQ %d: %m",
-                 intp->pin);
     abort();
 fail_irqfd:
     vfio_start_eventfd_injection(sbdev, irq);
diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
index e05bc09794ab..a88b69b6750e 100644
--- a/include/hw/vfio/vfio-common.h
+++ b/include/hw/vfio/vfio-common.h
@@ -166,6 +166,8 @@  void vfio_put_base_device(VFIODevice *vbasedev);
 void vfio_disable_irqindex(VFIODevice *vbasedev, int index);
 void vfio_unmask_single_irqindex(VFIODevice *vbasedev, int index);
 void vfio_mask_single_irqindex(VFIODevice *vbasedev, int index);
+int vfio_set_irq_signaling(VFIODevice *vbasedev, int index, int subindex,
+                           int action, int fd, Error **errp);
 void vfio_region_write(void *opaque, hwaddr addr,
                            uint64_t data, unsigned size);
 uint64_t vfio_region_read(void *opaque,