[net-next,2/2] net: dsa: microchip: Support optional 125MHz SYNCLKO output
diff mbox series

Message ID 1560372546-3153-3-git-send-email-hancock@sedsystems.ca
State Accepted
Delegated to: David Miller
Headers show
Series
  • Microchip KSZ driver enhancements
Related show

Commit Message

Robert Hancock June 12, 2019, 8:49 p.m. UTC
The KSZ9477 series chips have a SYNCLKO pin which by default outputs a
25MHz clock, but some board setups require a 125MHz clock instead. Added
a microchip,synclko-125 device tree property to allow indicating a
125MHz clock output is required.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
---
 Documentation/devicetree/bindings/net/dsa/ksz.txt | 2 ++
 drivers/net/dsa/microchip/ksz9477.c               | 4 ++++
 drivers/net/dsa/microchip/ksz_common.c            | 2 ++
 drivers/net/dsa/microchip/ksz_priv.h              | 1 +
 4 files changed, 9 insertions(+)

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
index e7db726..4ac21ce 100644
--- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt
@@ -16,6 +16,8 @@  Required properties:
 Optional properties:
 
 - reset-gpios		: Should be a gpio specifier for a reset line
+- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to
+			  125MHz instead of 25MHz.
 
 See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required and optional properties.
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 7be6d84..508380f 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -258,6 +258,10 @@  static int ksz9477_reset_switch(struct ksz_device *dev)
 	data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
 	ksz_write16(dev, REG_SW_MAC_CTRL_2, data16);
 
+	if (dev->synclko_125)
+		ksz_write8(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1,
+			   SW_ENABLE_REFCLKO | SW_REFCLKO_IS_125MHZ);
+
 	return 0;
 }
 
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 39dace8..40c57d8 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -460,6 +460,8 @@  int ksz_switch_register(struct ksz_device *dev,
 		ret = of_get_phy_mode(dev->dev->of_node);
 		if (ret >= 0)
 			dev->interface = ret;
+		dev->synclko_125 = of_property_read_bool(dev->dev->of_node,
+							 "microchip,synclko-125");
 	}
 
 	ret = dsa_register_switch(dev->ds);
diff --git a/drivers/net/dsa/microchip/ksz_priv.h b/drivers/net/dsa/microchip/ksz_priv.h
index 724301d..c615d2a 100644
--- a/drivers/net/dsa/microchip/ksz_priv.h
+++ b/drivers/net/dsa/microchip/ksz_priv.h
@@ -78,6 +78,7 @@  struct ksz_device {
 	phy_interface_t interface;
 	u32 regs_size;
 	bool phy_errata_9477;
+	bool synclko_125;
 
 	struct vlan_table *vlan_cache;