diff mbox series

[V10,07/15] PCI: dwc: Add support to enable CDM register check

Message ID 20190612095339.20118-8-vidyas@nvidia.com
State Superseded
Delegated to: Lorenzo Pieralisi
Headers show
Series Add Tegra194 PCIe support | expand

Commit Message

Vidya Sagar June 12, 2019, 9:53 a.m. UTC 
Add support to enable CDM (Configuration Dependent Module) register check
for any data corruption based on the device-tree flag 'snps,enable-cdm-check'.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
---
Changes since [v9]:
* None

Changes since [v8]:
* None

Changes since [v7]:
* None

Changes since [v6]:
* Changed "enable-cdm-check" to "snps,enable-cdm-check"

Changes since [v5]:
* None

Changes since [v4]:
* None

Changes since [v3]:
* None

Changes since [v2]:
* Changed code and commit description to reflect change in flag from
  'cdm-check' to 'enable-cdm-check'

Changes since [v1]:
* This is a new patch in v2 series

 drivers/pci/controller/dwc/pcie-designware.c | 7 +++++++
 drivers/pci/controller/dwc/pcie-designware.h | 9 +++++++++
 2 files changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index d8be6c3339fa..e9a059163034 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -521,4 +521,11 @@  void dw_pcie_setup(struct dw_pcie *pci)
 		break;
 	}
 	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+
+	if (of_property_read_bool(np, "snps,enable-cdm-check")) {
+		val = dw_pcie_readl_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS);
+		val |= PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS |
+		       PCIE_PL_CHK_REG_CHK_REG_START;
+		dw_pcie_writel_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS, val);
+	}
 }
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 45cd7c88d28a..6f555025caf9 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -86,6 +86,15 @@ 
 #define PCIE_MISC_CONTROL_1_OFF		0x8BC
 #define PCIE_DBI_RO_WR_EN		BIT(0)
 
+#define PCIE_PL_CHK_REG_CONTROL_STATUS			0xB20
+#define PCIE_PL_CHK_REG_CHK_REG_START			BIT(0)
+#define PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS		BIT(1)
+#define PCIE_PL_CHK_REG_CHK_REG_COMPARISON_ERROR	BIT(16)
+#define PCIE_PL_CHK_REG_CHK_REG_LOGIC_ERROR		BIT(17)
+#define PCIE_PL_CHK_REG_CHK_REG_COMPLETE		BIT(18)
+
+#define PCIE_PL_CHK_REG_ERR_ADDR			0xB28
+
 /*
  * iATU Unroll-specific register definitions
  * From 4.80 core version the address translation will be made by unroll