| Message ID | 20190611174909.12162-2-thomas.preston@codethink.co.uk |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | ASoC: Codecs: Add TDA7802 codec | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | "total: 0 errors, 1 warnings, 26 lines checked" |
On Tue, Jun 11, 2019 at 06:49:06PM +0100, Thomas Preston wrote: > Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk> > Cc: Patrick Glaser <pglaser@tesla.com> > Cc: Rob Duncan <rduncan@tesla.com> > Cc: Nate Case <ncase@tesla.com> > --- > .../devicetree/bindings/sound/tda7802.txt | 26 ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/tda7802.txt > > diff --git a/Documentation/devicetree/bindings/sound/tda7802.txt b/Documentation/devicetree/bindings/sound/tda7802.txt > new file mode 100644 > index 000000000000..f80aaf4f1ba0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/tda7802.txt > @@ -0,0 +1,26 @@ > +ST TDA7802 audio processor > + > +This device supports I2C only. > + > +Required properties: > + > +- compatible : "st,tda7802" > +- reg : the I2C address of the device > +- enable-supply : a regulator spec for the PLLen pin > + > +Optional properties: > + > +- st,gain-ch13 : gain for channels 1 and 3 (range: 1-4) > +- st,gain-ch24 : gain for channels 2 and 3 (range: 1-4) Does it make sense to have the gains in device tree? Are these expected to be fixed by the system design, normally the gain would be controlled through an ALSA control. Thanks, Charles
diff --git a/Documentation/devicetree/bindings/sound/tda7802.txt b/Documentation/devicetree/bindings/sound/tda7802.txt new file mode 100644 index 000000000000..f80aaf4f1ba0 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tda7802.txt @@ -0,0 +1,26 @@ +ST TDA7802 audio processor + +This device supports I2C only. + +Required properties: + +- compatible : "st,tda7802" +- reg : the I2C address of the device +- enable-supply : a regulator spec for the PLLen pin + +Optional properties: + +- st,gain-ch13 : gain for channels 1 and 3 (range: 1-4) +- st,gain-ch24 : gain for channels 2 and 3 (range: 1-4) +- st,diagnostic-mode-ch13 : diagnotic mode for channels 1 and 3 + values: "Speaker" (default), "Booster" +- st,diagnostic-mode-ch24 : diagnotic mode for channels 2 and 4 + values: "Speaker" (default), "Booster" + +Example: + +amp: tda7802@6c { + compatible = "st,tda7802"; + reg = <0x6c>; + enable-supply = <&_enable_reg>; +};
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk> Cc: Patrick Glaser <pglaser@tesla.com> Cc: Rob Duncan <rduncan@tesla.com> Cc: Nate Case <ncase@tesla.com> --- .../devicetree/bindings/sound/tda7802.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tda7802.txt