diff mbox series

[net-next,v2,5/9] mlxsw: reg: Add Management Pulse Per Second Register

Message ID 20190611154512.17650-6-idosch@idosch.org
State Accepted
Delegated to: David Miller
Headers show
Series mlxsw: Add support for physical hardware clock | expand

Commit Message

Ido Schimmel June 11, 2019, 3:45 p.m. UTC 
From: Shalom Toledo <shalomt@mellanox.com>

The MTPPS register provides the device PPS capabilities, configure the PPS
in and out modules and holds the PPS in time stamp.

Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 58 +++++++++++++++++++++++
 1 file changed, 58 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 9ec154975cb2..d8eb9ef01646 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -8691,6 +8691,63 @@  static inline void mlxsw_reg_mlcr_pack(char *payload, u8 local_port,
 					   MLXSW_REG_MLCR_DURATION_MAX : 0);
 }
 
+/* MTPPS - Management Pulse Per Second Register
+ * --------------------------------------------
+ * This register provides the device PPS capabilities, configure the PPS in and
+ * out modules and holds the PPS in time stamp.
+ */
+#define MLXSW_REG_MTPPS_ID 0x9053
+#define MLXSW_REG_MTPPS_LEN 0x3C
+
+MLXSW_REG_DEFINE(mtpps, MLXSW_REG_MTPPS_ID, MLXSW_REG_MTPPS_LEN);
+
+/* reg_mtpps_enable
+ * Enables the PPS functionality the specific pin.
+ * A boolean variable.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtpps, enable, 0x20, 31, 1);
+
+enum mlxsw_reg_mtpps_pin_mode {
+	MLXSW_REG_MTPPS_PIN_MODE_VIRTUAL_PIN = 0x2,
+};
+
+/* reg_mtpps_pin_mode
+ * Pin mode to be used. The mode must comply with the supported modes of the
+ * requested pin.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtpps, pin_mode, 0x20, 8, 4);
+
+#define MLXSW_REG_MTPPS_PIN_SP_VIRTUAL_PIN	7
+
+/* reg_mtpps_pin
+ * Pin to be configured or queried out of the supported pins.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mtpps, pin, 0x20, 0, 8);
+
+/* reg_mtpps_time_stamp
+ * When pin_mode = pps_in, the latched device time when it was triggered from
+ * the external GPIO pin.
+ * When pin_mode = pps_out or virtual_pin or pps_out_and_virtual_pin, the target
+ * time to generate next output signal.
+ * Time is in units of device clock.
+ * Access: RW
+ */
+MLXSW_ITEM64(reg, mtpps, time_stamp, 0x28, 0, 64);
+
+static inline void
+mlxsw_reg_mtpps_vpin_pack(char *payload, u64 time_stamp)
+{
+	MLXSW_REG_ZERO(mtpps, payload);
+	mlxsw_reg_mtpps_pin_set(payload, MLXSW_REG_MTPPS_PIN_SP_VIRTUAL_PIN);
+	mlxsw_reg_mtpps_pin_mode_set(payload,
+				     MLXSW_REG_MTPPS_PIN_MODE_VIRTUAL_PIN);
+	mlxsw_reg_mtpps_enable_set(payload, true);
+	mlxsw_reg_mtpps_time_stamp_set(payload, time_stamp);
+}
+
 /* MTUTC - Management UTC Register
  * -------------------------------
  * Configures the HW UTC counter.
@@ -10149,6 +10206,7 @@  static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
 	MLXSW_REG(mgir),
 	MLXSW_REG(mrsr),
 	MLXSW_REG(mlcr),
+	MLXSW_REG(mtpps),
 	MLXSW_REG(mtutc),
 	MLXSW_REG(mpsc),
 	MLXSW_REG(mcqi),