diff mbox series

[v2,03/14] pwm: meson: use GENMASK and FIELD_PREP for the lo and hi values

Message ID 20190608180626.30589-4-martin.blumenstingl@googlemail.com
State Changes Requested
Headers show
Series pwm-meson: cleanups and improvements | expand

Commit Message

Martin Blumenstingl June 8, 2019, 6:06 p.m. UTC
meson_pwm_calc() ensures that "lo" is always less than 16 bits wide
(otherwise it would overflow into the "hi" part of the REG_PWM_{A,B}
register).
Use GENMASK and FIELD_PREP for the lo and hi values to make it easier to
spot how wide these are internally. Additionally this is a preparation
step for the .get_state() implementation where the GENMASK() for lo and
hi becomes handy because it can be used with FIELD_GET() to extract the
values from the register REG_PWM_{A,B} register.

No functional changes intended.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/pwm/pwm-meson.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

Comments

Uwe Kleine-König June 11, 2019, 3:38 p.m. UTC | #1
On Sat, Jun 08, 2019 at 08:06:15PM +0200, Martin Blumenstingl wrote:
> meson_pwm_calc() ensures that "lo" is always less than 16 bits wide
> (otherwise it would overflow into the "hi" part of the REG_PWM_{A,B}
> register).
> Use GENMASK and FIELD_PREP for the lo and hi values to make it easier to
> spot how wide these are internally. Additionally this is a preparation
> step for the .get_state() implementation where the GENMASK() for lo and
> hi becomes handy because it can be used with FIELD_GET() to extract the
> values from the register REG_PWM_{A,B} register.
> 
> No functional changes intended.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Best regards
Uwe
diff mbox series

Patch

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 35b38c7201c3..c62a3ac924d0 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -5,6 +5,8 @@ 
  * Copyright (C) 2014 Amlogic, Inc.
  */
 
+#include <linux/bitfield.h>
+#include <linux/bits.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/err.h>
@@ -20,7 +22,8 @@ 
 
 #define REG_PWM_A		0x0
 #define REG_PWM_B		0x4
-#define PWM_HIGH_SHIFT		16
+#define PWM_LOW_MASK		GENMASK(15, 0)
+#define PWM_HIGH_MASK		GENMASK(31, 16)
 
 #define REG_MISC_AB		0x8
 #define MISC_B_CLK_EN		BIT(23)
@@ -217,7 +220,8 @@  static void meson_pwm_enable(struct meson_pwm *meson, struct pwm_device *pwm)
 	value |= clk_enable;
 	writel(value, meson->base + REG_MISC_AB);
 
-	value = (channel->hi << PWM_HIGH_SHIFT) | channel->lo;
+	value = FIELD_PREP(PWM_HIGH_MASK, channel->hi) |
+		FIELD_PREP(PWM_LOW_MASK, channel->lo);
 	writel(value, meson->base + offset);
 
 	value = readl(meson->base + REG_MISC_AB);