| Message ID | 1559787471-3734-1-git-send-email-wangzqbj@inspur.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | [dev-5.1] ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine | expand |
Reviewed-by: Lei YU <mine260309@gmail.com> On Thu, Jun 6, 2019 at 10:18 AM John Wang <wangzqbj@inspur.com> wrote: > > The fp5280g2 is an open-power server platform with > an aspeed ast2500 BMC > > Signed-off-by: John Wang <wangzqbj@inspur.com> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 843 +++++++++++++++++++++++ > 2 files changed, 844 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index bed2047..31db1d3 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -1256,6 +1256,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ > aspeed-bmc-facebook-cmm.dtb \ > aspeed-bmc-facebook-tiogapass.dtb \ > aspeed-bmc-intel-s2600wf.dtb \ > + aspeed-bmc-inspur-fp5280g2.dtb \ > aspeed-bmc-lenovo-hr630.dtb \ > aspeed-bmc-microsoft-olympus.dtb \ > aspeed-bmc-opp-lanyang.dtb \ > diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts > new file mode 100644 > index 0000000..771de77 > --- /dev/null > +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts > @@ -0,0 +1,843 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/dts-v1/; > +#include "aspeed-g5.dtsi" > +#include <dt-bindings/gpio/aspeed-gpio.h> > +#include <dt-bindings/leds/leds-pca955x.h> > + > +/ { > + model = "FP5280G2 BMC"; > + compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500"; > + > + chosen { > + stdout-path = &uart5; > + bootargs = "console=ttyS4,115200 earlyprintk"; > + }; > + > + memory@80000000 { > + reg = <0x80000000 0x20000000>; > + }; > + > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + vga_memory: framebuffer@9f000000 { > + no-map; > + reg = <0x9f000000 0x01000000>; /* 16M */ > + }; > + > + flash_memory: region@98000000 { > + no-map; > + reg = <0x98000000 0x04000000>; /* 64M */ > + }; > + > + coldfire_memory: codefire_memory@9ef00000 { > + reg = <0x9ef00000 0x00100000>; > + no-map; > + }; > + > + gfx_memory: framebuffer { > + size = <0x01000000>; > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + > + video_engine_memory: jpegbuffer { > + size = <0x02000000>; /* 32M */ > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + }; > + > + fsi: gpio-fsi { > + compatible = "fsi-master-gpio", "fsi-master"; > + #address-cells = <2>; > + #size-cells = <0>; > + no-gpio-delays; > + > + memory-region = <&coldfire_memory>; > + aspeed,sram = <&sram>; > + aspeed,cvic = <&cvic>; > + > + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; > + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; > + mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>; > + enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>; > + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + checkstop { > + label = "checkstop"; > + gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(B, 3)>; > + }; > + > + ps0-presence { > + label = "ps0-presence"; > + gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(F, 0)>; > + }; > + > + ps1-presence { > + label = "ps1-presence"; > + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(F, 1)>; > + }; > + > + }; > + > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + #address-cells = <1>; > + #size-cells = <0>; > + poll-interval = <1000>; > + > + fan0-presence { > + label = "fan0-presence"; > + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; > + linux,code = <0>; > + }; > + > + fan1-presence { > + label = "fan1-presence"; > + gpios = <&pca1 1 GPIO_ACTIVE_LOW>; > + linux,code = <1>; > + }; > + > + fan2-presence { > + label = "fan2-presence"; > + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; > + linux,code = <2>; > + }; > + > + fan3-presence { > + label = "fan3-presence"; > + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; > + linux,code = <3>; > + }; > + > + fan4-presence { > + label = "fan4-presence"; > + gpios = <&pca1 4 GPIO_ACTIVE_LOW>; > + linux,code = <4>; > + }; > + > + fan5-presence { > + label = "fan5-presence"; > + gpios = <&pca1 5 GPIO_ACTIVE_LOW>; > + linux,code = <5>; > + }; > + > + fan6-presence { > + label = "fan6-presence"; > + gpios = <&pca1 6 GPIO_ACTIVE_LOW>; > + linux,code = <6>; > + }; > + > + fan7-presence { > + label = "fan7-presence"; > + gpios = <&pca1 7 GPIO_ACTIVE_LOW>; > + linux,code = <7>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + power { > + label = "power"; > + /* TODO: dummy gpio */ > + gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>; > + }; > + > + }; > + > + iio-hwmon-battery { > + compatible = "iio-hwmon"; > + io-channels = <&adc 15>; > + }; > + > + iio-hwmon { > + compatible = "iio-hwmon"; > + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, > + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>, > + <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>; > + }; > + > +}; > + > +&fmc { > + status = "okay"; > + > + flash@0 { > + status = "okay"; > + label = "bmc"; > + m25p,fast-read; > + spi-max-frequency = <50000000>; > +#include "openbmc-flash-layout.dtsi" > + }; > +}; > + > +&spi1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spi1_default>; > + > + flash@0 { > + status = "okay"; > + label = "pnor"; > + m25p,fast-read; > + spi-max-frequency = <100000000>; > + }; > +}; > + > +&uart1 { > + /* Rear RS-232 connector */ > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd1_default > + &pinctrl_rxd1_default > + &pinctrl_nrts1_default > + &pinctrl_ndtr1_default > + &pinctrl_ndsr1_default > + &pinctrl_ncts1_default > + &pinctrl_ndcd1_default > + &pinctrl_nri1_default>; > +}; > + > +&uart2 { > + /* Test Point */ > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; > +}; > + > +&uart3 { > + /* APSS */ > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; > +}; > + > +&uart5 { > + status = "okay"; > +}; > + > +&lpc_ctrl { > + status = "okay"; > + memory-region = <&flash_memory>; > + flash = <&spi1>; > +}; > + > +&mbox { > + status = "okay"; > +}; > + > +&mac0 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rmii1_default>; > + use-ncsi; > +}; > + > +&mac1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; > +}; > + > +&i2c0 { > + /* LCD */ > + status = "okay"; > +}; > + > +&i2c1 { > + status = "okay"; > + > + eeprom@50 { > + compatible = "atmel,24c256"; > + reg = <0x50>; > + label = "fru"; > + }; > + > +}; > + > +&i2c2 { > + status = "okay"; > + > + tmp112@48 { > + compatible = "ti,tmp112"; > + reg = <0x48>; > + label = "inlet"; > + }; > + > + tmp112@49 { > + compatible = "ti,tmp112"; > + reg = <0x49>; > + label = "outlet"; > + }; > + > + i2c-switch@70 { > + compatible = "nxp,pca9546"; > + reg = <0x70>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + tmp112@4a { > + compatible = "ti,tmp112"; > + reg = <0x4a>; > + label = "psu_inlet"; > + }; > + > + }; > + > + i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + > + tmp112@4a { > + compatible = "ti,tmp112"; > + reg = <0x4a>; > + label = "ocp_zone"; > + }; > + }; > + > + i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + > + tmp112@4a { > + compatible = "ti,tmp112"; > + reg = <0x4a>; > + label = "bmc_zone"; > + }; > + }; > + > + i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + > + tmp112@7c { > + compatible = "emc1413"; > + reg = <0x7c>; > + }; > + }; > + > + }; > +}; > + > +&i2c3 { > + /* Riser Card */ > + status = "okay"; > +}; > + > +&i2c4 { > + status = "okay"; > + > + rtc@68 { > + compatible = "dallas,ds3232"; > + reg = <0x68>; > + }; > +}; > + > +&i2c5 { > + /* vr */ > + status = "okay"; > +}; > + > +&i2c6 { > + /* bp card */ > + status = "okay"; > +}; > + > +&i2c7 { > + status = "okay"; > + > + i2c-switch@70 { > + compatible = "nxp,pca9546"; > + reg = <0x70>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + adm1278@10 { > + compatible = "adi,adm1278"; > + reg = <0x10>; > + }; > + > + adm1278@13 { > + compatible = "adi,adm1278"; > + reg = <0x13>; > + }; > + > + adm1278@50 { > + compatible = "adi,adm1278"; > + reg = <0x50>; > + }; > + > + adm1278@53 { > + compatible = "adi,adm1278"; > + reg = <0x53>; > + }; > + > + }; > + > + /*pcie riser*/ > + > + }; > +}; > + > +&i2c8 { > + status = "okay"; > + > + pca0: pca9555@20 { > + compatible = "nxp,pca9555"; > + reg = <0x20>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + gpio@0 { > + reg = <0>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@1 { > + reg = <1>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@2 { > + reg = <2>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@3 { > + reg = <3>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@4 { > + reg = <4>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@5 { > + reg = <5>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@6 { > + reg = <6>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@7 { > + reg = <7>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + }; > + > + pca1: pca9555@21 { > + compatible = "nxp,pca9555"; > + reg = <0x21>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + gpio@0 { > + reg = <0>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@1 { > + reg = <1>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@2 { > + reg = <2>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@3 { > + reg = <3>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@4 { > + reg = <4>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@5 { > + reg = <5>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@6 { > + reg = <6>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@7 { > + reg = <7>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + }; > + > + pca2: pca9555@22 { > + compatible = "nxp,pca9555"; > + reg = <0x22>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + gpio@0 { > + reg = <0>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@1 { > + reg = <1>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@2 { > + reg = <2>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@3 { > + reg = <3>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@4 { > + reg = <4>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@5 { > + reg = <5>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@6 { > + reg = <6>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@7 { > + reg = <7>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + }; > + > + pca3: pca9555@23 { > + compatible = "nxp,pca9555"; > + reg = <0x23>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + gpio@0 { > + reg = <0>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@1 { > + reg = <1>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@2 { > + reg = <2>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@3 { > + reg = <3>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@4 { > + reg = <4>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@5 { > + reg = <5>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@6 { > + reg = <6>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@7 { > + reg = <7>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + }; > + > + pca4: pca9555@24 { > + compatible = "nxp,pca9555"; > + reg = <0x24>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + gpio@0 { > + reg = <0>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@1 { > + reg = <1>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@2 { > + reg = <2>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@3 { > + reg = <3>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@4 { > + reg = <4>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@5 { > + reg = <5>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@6 { > + reg = <6>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@7 { > + reg = <7>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + }; > + > + pca5: pca9555@25 { > + compatible = "nxp,pca9555"; > + reg = <0x25>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + gpio@0 { > + reg = <0>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@1 { > + reg = <1>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@2 { > + reg = <2>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@3 { > + reg = <3>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@4 { > + reg = <4>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@5 { > + reg = <5>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@6 { > + reg = <6>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + > + gpio@7 { > + reg = <7>; > + type = <PCA955X_TYPE_GPIO>; > + }; > + }; > + > +}; > + > +&i2c9 { > + /* cpld */ > + status = "okay"; > +}; > + > +&i2c10 { > + /* hdd bp */ > + status = "okay"; > +}; > + > +&i2c11 { > + status = "okay"; > + > + power-supply@58 { > + compatible = "pmbus"; > + reg = <0x58>; > + }; > + > + power-supply@5a { > + compatible = "pmbus"; > + reg = <0x5a>; > + }; > +}; > + > +&i2c12 { > + /* odcc */ > + status = "okay"; > +}; > + > +&vuart { > + status = "okay"; > +}; > + > +&gfx { > + status = "okay"; > + memory-region = <&gfx_memory>; > +}; > + > +&pinctrl { > + aspeed,external-nodes = <&gfx &lhc>; > +}; > + > +&gpio { > + pin_gpio_b7 { > + gpio-hog; > + gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>; > + output-high; > + line-name = "BMC_INIT_OK"; > + }; > +}; > + > +&wdt1 { > + aspeed,reset-type = "none"; > + aspeed,external-signal; > + aspeed,ext-push-pull; > + aspeed,ext-active-high; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdtrst1_default>; > +}; > + > +&ibt { > + status = "okay"; > + > +}; > + > +&adc { > + status = "okay"; > +}; > + > +&vhub { > + status = "okay"; > +}; > + > +&video { > + status = "okay"; > + memory-region = <&video_engine_memory>; > +}; > + > +&pwm_tacho { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default > + &pinctrl_pwm2_default &pinctrl_pwm3_default > + &pinctrl_pwm4_default &pinctrl_pwm5_default > + &pinctrl_pwm6_default &pinctrl_pwm7_default>; > + > + fan@0 { > + reg = <0x00>; > + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; > + }; > + > + fan@1 { > + reg = <0x01>; > + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; > + }; > + > + fan@2 { > + reg = <0x02>; > + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>; > + }; > + > + fan@3 { > + reg = <0x03>; > + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>; > + }; > + > + fan@4 { > + reg = <0x04>; > + aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>; > + }; > + > + fan@5 { > + reg = <0x05>; > + aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>; > + }; > + > + fan@6 { > + reg = <0x06>; > + aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>; > + }; > + > + fan@7 { > + reg = <0x07>; > + aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>; > + }; > + > +}; > + > +#include "ibm-power9-dual.dtsi" > -- > 2.7.4 >
Hi John, On Thu, 6 Jun 2019, at 17:22, Lei YU wrote: > Reviewed-by: Lei YU <mine260309@gmail.com> > > On Thu, Jun 6, 2019 at 10:18 AM John Wang <wangzqbj@inspur.com> wrote: > > > > The fp5280g2 is an open-power server platform with > > an aspeed ast2500 BMC > > > > Signed-off-by: John Wang <wangzqbj@inspur.com> > > --- > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 843 +++++++++++++++++++++++ > > 2 files changed, 844 insertions(+) > > create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts > > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > index bed2047..31db1d3 100644 > > --- a/arch/arm/boot/dts/Makefile > > +++ b/arch/arm/boot/dts/Makefile > > @@ -1256,6 +1256,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ > > aspeed-bmc-facebook-cmm.dtb \ > > aspeed-bmc-facebook-tiogapass.dtb \ > > aspeed-bmc-intel-s2600wf.dtb \ > > + aspeed-bmc-inspur-fp5280g2.dtb \ > > aspeed-bmc-lenovo-hr630.dtb \ > > aspeed-bmc-microsoft-olympus.dtb \ > > aspeed-bmc-opp-lanyang.dtb \ > > diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts > > new file mode 100644 > > index 0000000..771de77 > > --- /dev/null > > +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts > > @@ -0,0 +1,843 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/dts-v1/; > > +#include "aspeed-g5.dtsi" > > +#include <dt-bindings/gpio/aspeed-gpio.h> > > +#include <dt-bindings/leds/leds-pca955x.h> > > + > > +/ { > > + model = "FP5280G2 BMC"; > > + compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500"; > > + > > + chosen { > > + stdout-path = &uart5; > > + bootargs = "console=ttyS4,115200 earlyprintk"; > > + }; > > + > > + memory@80000000 { > > + reg = <0x80000000 0x20000000>; > > + }; > > + > > + reserved-memory { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + > > + vga_memory: framebuffer@9f000000 { > > + no-map; > > + reg = <0x9f000000 0x01000000>; /* 16M */ > > + }; > > + > > + flash_memory: region@98000000 { > > + no-map; > > + reg = <0x98000000 0x04000000>; /* 64M */ > > + }; > > + > > + coldfire_memory: codefire_memory@9ef00000 { > > + reg = <0x9ef00000 0x00100000>; > > + no-map; > > + }; > > + > > + gfx_memory: framebuffer { > > + size = <0x01000000>; > > + alignment = <0x01000000>; > > + compatible = "shared-dma-pool"; > > + reusable; > > + }; > > + > > + video_engine_memory: jpegbuffer { > > + size = <0x02000000>; /* 32M */ > > + alignment = <0x01000000>; > > + compatible = "shared-dma-pool"; > > + reusable; > > + }; > > + }; > > + > > + fsi: gpio-fsi { > > + compatible = "fsi-master-gpio", "fsi-master"; > > + #address-cells = <2>; > > + #size-cells = <0>; > > + no-gpio-delays; > > + > > + memory-region = <&coldfire_memory>; > > + aspeed,sram = <&sram>; > > + aspeed,cvic = <&cvic>; > > + > > + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; > > + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; > > + mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>; > > + enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>; > > + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; > > + }; > > + > > + gpio-keys { > > + compatible = "gpio-keys"; > > + > > + checkstop { > > + label = "checkstop"; > > + gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>; > > + linux,code = <ASPEED_GPIO(B, 3)>; > > + }; > > + > > + ps0-presence { > > + label = "ps0-presence"; > > + gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>; > > + linux,code = <ASPEED_GPIO(F, 0)>; > > + }; > > + > > + ps1-presence { > > + label = "ps1-presence"; > > + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; > > + linux,code = <ASPEED_GPIO(F, 1)>; > > + }; > > + > > + }; > > + > > + gpio-keys-polled { > > + compatible = "gpio-keys-polled"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + poll-interval = <1000>; > > + > > + fan0-presence { > > + label = "fan0-presence"; > > + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; > > + linux,code = <0>; > > + }; > > + > > + fan1-presence { > > + label = "fan1-presence"; > > + gpios = <&pca1 1 GPIO_ACTIVE_LOW>; > > + linux,code = <1>; > > + }; > > + > > + fan2-presence { > > + label = "fan2-presence"; > > + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; > > + linux,code = <2>; > > + }; > > + > > + fan3-presence { > > + label = "fan3-presence"; > > + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; > > + linux,code = <3>; > > + }; > > + > > + fan4-presence { > > + label = "fan4-presence"; > > + gpios = <&pca1 4 GPIO_ACTIVE_LOW>; > > + linux,code = <4>; > > + }; > > + > > + fan5-presence { > > + label = "fan5-presence"; > > + gpios = <&pca1 5 GPIO_ACTIVE_LOW>; > > + linux,code = <5>; > > + }; > > + > > + fan6-presence { > > + label = "fan6-presence"; > > + gpios = <&pca1 6 GPIO_ACTIVE_LOW>; > > + linux,code = <6>; > > + }; > > + > > + fan7-presence { > > + label = "fan7-presence"; > > + gpios = <&pca1 7 GPIO_ACTIVE_LOW>; > > + linux,code = <7>; > > + }; > > + }; > > + > > + leds { > > + compatible = "gpio-leds"; > > + > > + power { > > + label = "power"; > > + /* TODO: dummy gpio */ > > + gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>; > > + }; > > + > > + }; > > + > > + iio-hwmon-battery { > > + compatible = "iio-hwmon"; > > + io-channels = <&adc 15>; > > + }; > > + > > + iio-hwmon { > > + compatible = "iio-hwmon"; > > + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, > > + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>, > > + <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>; > > + }; > > + > > +}; > > + > > +&fmc { > > + status = "okay"; > > + > > + flash@0 { > > + status = "okay"; > > + label = "bmc"; > > + m25p,fast-read; > > + spi-max-frequency = <50000000>; > > +#include "openbmc-flash-layout.dtsi" > > + }; > > +}; > > + > > +&spi1 { > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_spi1_default>; > > + > > + flash@0 { > > + status = "okay"; > > + label = "pnor"; > > + m25p,fast-read; > > + spi-max-frequency = <100000000>; > > + }; > > +}; > > + > > +&uart1 { > > + /* Rear RS-232 connector */ > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_txd1_default > > + &pinctrl_rxd1_default > > + &pinctrl_nrts1_default > > + &pinctrl_ndtr1_default > > + &pinctrl_ndsr1_default > > + &pinctrl_ncts1_default > > + &pinctrl_ndcd1_default > > + &pinctrl_nri1_default>; > > +}; > > + > > +&uart2 { > > + /* Test Point */ > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; > > +}; > > + > > +&uart3 { > > + /* APSS */ > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; > > +}; > > + > > +&uart5 { > > + status = "okay"; > > +}; > > + > > +&lpc_ctrl { > > + status = "okay"; > > + memory-region = <&flash_memory>; > > + flash = <&spi1>; > > +}; > > + > > +&mbox { > > + status = "okay"; Are you sure this is necessary? We're planning to drop mbox support in the near future, so just want to make sure you're aware of that. > > +}; > > + > > +&mac0 { > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_rmii1_default>; > > + use-ncsi; > > +}; > > + > > +&mac1 { > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; > > +}; > > + > > +&i2c0 { > > + /* LCD */ > > + status = "okay"; > > +}; > > + > > +&i2c1 { > > + status = "okay"; > > + > > + eeprom@50 { > > + compatible = "atmel,24c256"; > > + reg = <0x50>; > > + label = "fru"; > > + }; > > + > > +}; > > + > > +&i2c2 { > > + status = "okay"; > > + > > + tmp112@48 { > > + compatible = "ti,tmp112"; > > + reg = <0x48>; > > + label = "inlet"; > > + }; > > + > > + tmp112@49 { > > + compatible = "ti,tmp112"; > > + reg = <0x49>; > > + label = "outlet"; > > + }; > > + > > + i2c-switch@70 { > > + compatible = "nxp,pca9546"; > > + reg = <0x70>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + i2c@0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <0>; > > + > > + tmp112@4a { > > + compatible = "ti,tmp112"; > > + reg = <0x4a>; > > + label = "psu_inlet"; > > + }; > > + > > + }; > > + > > + i2c@1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <1>; > > + > > + tmp112@4a { > > + compatible = "ti,tmp112"; > > + reg = <0x4a>; > > + label = "ocp_zone"; > > + }; > > + }; > > + > > + i2c@2 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <2>; > > + > > + tmp112@4a { > > + compatible = "ti,tmp112"; > > + reg = <0x4a>; > > + label = "bmc_zone"; > > + }; > > + }; > > + > > + i2c@3 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <3>; > > + > > + tmp112@7c { > > + compatible = "emc1413"; Should have a "microchip," prefix? > > + reg = <0x7c>; > > + }; > > + }; > > + > > + }; > > +}; > > + > > +&i2c3 { > > + /* Riser Card */ > > + status = "okay"; > > +}; > > + > > +&i2c4 { > > + status = "okay"; > > + > > + rtc@68 { > > + compatible = "dallas,ds3232"; > > + reg = <0x68>; > > + }; > > +}; > > + > > +&i2c5 { > > + /* vr */ > > + status = "okay"; > > +}; > > + > > +&i2c6 { > > + /* bp card */ > > + status = "okay"; > > +}; > > + > > +&i2c7 { > > + status = "okay"; > > + > > + i2c-switch@70 { > > + compatible = "nxp,pca9546"; > > + reg = <0x70>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + i2c@0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <0>; > > + > > + adm1278@10 { > > + compatible = "adi,adm1278"; > > + reg = <0x10>; > > + }; > > + > > + adm1278@13 { > > + compatible = "adi,adm1278"; > > + reg = <0x13>; > > + }; > > + > > + adm1278@50 { > > + compatible = "adi,adm1278"; > > + reg = <0x50>; > > + }; > > + > > + adm1278@53 { > > + compatible = "adi,adm1278"; > > + reg = <0x53>; > > + }; > > + > > + }; > > + > > + /*pcie riser*/ > > + > > + }; > > +}; > > + > > +&i2c8 { > > + status = "okay"; > > + > > + pca0: pca9555@20 { > > + compatible = "nxp,pca9555"; > > + reg = <0x20>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + gpio@0 { > > + reg = <0>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@1 { > > + reg = <1>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@2 { > > + reg = <2>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@3 { > > + reg = <3>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@4 { > > + reg = <4>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@5 { > > + reg = <5>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@6 { > > + reg = <6>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@7 { > > + reg = <7>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + }; > > + > > + pca1: pca9555@21 { > > + compatible = "nxp,pca9555"; > > + reg = <0x21>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + gpio@0 { > > + reg = <0>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@1 { > > + reg = <1>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@2 { > > + reg = <2>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@3 { > > + reg = <3>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@4 { > > + reg = <4>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@5 { > > + reg = <5>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@6 { > > + reg = <6>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@7 { > > + reg = <7>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + }; > > + > > + pca2: pca9555@22 { > > + compatible = "nxp,pca9555"; > > + reg = <0x22>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + gpio@0 { > > + reg = <0>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@1 { > > + reg = <1>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@2 { > > + reg = <2>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@3 { > > + reg = <3>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@4 { > > + reg = <4>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@5 { > > + reg = <5>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@6 { > > + reg = <6>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@7 { > > + reg = <7>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + }; > > + > > + pca3: pca9555@23 { > > + compatible = "nxp,pca9555"; > > + reg = <0x23>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + gpio@0 { > > + reg = <0>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@1 { > > + reg = <1>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@2 { > > + reg = <2>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@3 { > > + reg = <3>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@4 { > > + reg = <4>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@5 { > > + reg = <5>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@6 { > > + reg = <6>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@7 { > > + reg = <7>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + }; > > + > > + pca4: pca9555@24 { > > + compatible = "nxp,pca9555"; > > + reg = <0x24>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + gpio@0 { > > + reg = <0>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@1 { > > + reg = <1>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@2 { > > + reg = <2>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@3 { > > + reg = <3>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@4 { > > + reg = <4>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@5 { > > + reg = <5>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@6 { > > + reg = <6>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@7 { > > + reg = <7>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + }; > > + > > + pca5: pca9555@25 { > > + compatible = "nxp,pca9555"; > > + reg = <0x25>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + gpio@0 { > > + reg = <0>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@1 { > > + reg = <1>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@2 { > > + reg = <2>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@3 { > > + reg = <3>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@4 { > > + reg = <4>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@5 { > > + reg = <5>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@6 { > > + reg = <6>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + > > + gpio@7 { > > + reg = <7>; > > + type = <PCA955X_TYPE_GPIO>; > > + }; > > + }; > > + > > +}; > > + > > +&i2c9 { > > + /* cpld */ > > + status = "okay"; > > +}; > > + > > +&i2c10 { > > + /* hdd bp */ > > + status = "okay"; > > +}; > > + > > +&i2c11 { > > + status = "okay"; > > + > > + power-supply@58 { > > + compatible = "pmbus"; > > + reg = <0x58>; > > + }; > > + > > + power-supply@5a { > > + compatible = "pmbus"; > > + reg = <0x5a>; > > + }; > > +}; > > + > > +&i2c12 { > > + /* odcc */ > > + status = "okay"; > > +}; > > + > > +&vuart { > > + status = "okay"; > > +}; > > + > > +&gfx { > > + status = "okay"; > > + memory-region = <&gfx_memory>; > > +}; > > + > > +&pinctrl { > > + aspeed,external-nodes = <&gfx &lhc>; > > +}; > > + > > +&gpio { > > + pin_gpio_b7 { > > + gpio-hog; > > + gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>; > > + output-high; > > + line-name = "BMC_INIT_OK"; > > + }; > > +}; > > + > > +&wdt1 { > > + aspeed,reset-type = "none"; > > + aspeed,external-signal; > > + aspeed,ext-push-pull; > > + aspeed,ext-active-high; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_wdtrst1_default>; > > +}; > > + > > +&ibt { > > + status = "okay"; > > + > > +}; > > + > > +&adc { > > + status = "okay"; Please add the pinctrl properties to mux the necessary ADC lines which you have associated with the iio-hwmon bridge (you've used lines 0-14). Cheers, Andrew
On Wed, Jun 12, 2019 at 10:20 AM Andrew Jeffery <andrew@aj.id.au> wrote: > > Hi John, > > On Thu, 6 Jun 2019, at 17:22, Lei YU wrote: > > Reviewed-by: Lei YU <mine260309@gmail.com> > > > > On Thu, Jun 6, 2019 at 10:18 AM John Wang <wangzqbj@inspur.com> wrote: > > > > > > The fp5280g2 is an open-power server platform with > > > an aspeed ast2500 BMC > > > > > > Signed-off-by: John Wang <wangzqbj@inspur.com> > > > --- > > > arch/arm/boot/dts/Makefile | 1 + > > > arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 843 +++++++++++++++++++++++ > > > 2 files changed, 844 insertions(+) > > > create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts > > > > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > > index bed2047..31db1d3 100644 > > > --- a/arch/arm/boot/dts/Makefile > > > +++ b/arch/arm/boot/dts/Makefile > > > @@ -1256,6 +1256,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ > > > aspeed-bmc-facebook-cmm.dtb \ > > > aspeed-bmc-facebook-tiogapass.dtb \ > > > aspeed-bmc-intel-s2600wf.dtb \ > > > + aspeed-bmc-inspur-fp5280g2.dtb \ > > > aspeed-bmc-lenovo-hr630.dtb \ > > > aspeed-bmc-microsoft-olympus.dtb \ > > > aspeed-bmc-opp-lanyang.dtb \ > > > diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts > > > new file mode 100644 > > > index 0000000..771de77 > > > --- /dev/null > > > +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts > > > @@ -0,0 +1,843 @@ > > > +// SPDX-License-Identifier: GPL-2.0+ > > > +/dts-v1/; > > > +#include "aspeed-g5.dtsi" > > > +#include <dt-bindings/gpio/aspeed-gpio.h> > > > +#include <dt-bindings/leds/leds-pca955x.h> > > > + > > > +/ { > > > + model = "FP5280G2 BMC"; > > > + compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500"; > > > + > > > + chosen { > > > + stdout-path = &uart5; > > > + bootargs = "console=ttyS4,115200 earlyprintk"; > > > + }; > > > + > > > + memory@80000000 { > > > + reg = <0x80000000 0x20000000>; > > > + }; > > > + > > > + reserved-memory { > > > + #address-cells = <1>; > > > + #size-cells = <1>; > > > + ranges; > > > + > > > + vga_memory: framebuffer@9f000000 { > > > + no-map; > > > + reg = <0x9f000000 0x01000000>; /* 16M */ > > > + }; > > > + > > > + flash_memory: region@98000000 { > > > + no-map; > > > + reg = <0x98000000 0x04000000>; /* 64M */ > > > + }; > > > + > > > + coldfire_memory: codefire_memory@9ef00000 { > > > + reg = <0x9ef00000 0x00100000>; > > > + no-map; > > > + }; > > > + > > > + gfx_memory: framebuffer { > > > + size = <0x01000000>; > > > + alignment = <0x01000000>; > > > + compatible = "shared-dma-pool"; > > > + reusable; > > > + }; > > > + > > > + video_engine_memory: jpegbuffer { > > > + size = <0x02000000>; /* 32M */ > > > + alignment = <0x01000000>; > > > + compatible = "shared-dma-pool"; > > > + reusable; > > > + }; > > > + }; > > > + > > > + fsi: gpio-fsi { > > > + compatible = "fsi-master-gpio", "fsi-master"; > > > + #address-cells = <2>; > > > + #size-cells = <0>; > > > + no-gpio-delays; > > > + > > > + memory-region = <&coldfire_memory>; > > > + aspeed,sram = <&sram>; > > > + aspeed,cvic = <&cvic>; > > > + > > > + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; > > > + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; > > > + mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>; > > > + enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>; > > > + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; > > > + }; > > > + > > > + gpio-keys { > > > + compatible = "gpio-keys"; > > > + > > > + checkstop { > > > + label = "checkstop"; > > > + gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>; > > > + linux,code = <ASPEED_GPIO(B, 3)>; > > > + }; > > > + > > > + ps0-presence { > > > + label = "ps0-presence"; > > > + gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>; > > > + linux,code = <ASPEED_GPIO(F, 0)>; > > > + }; > > > + > > > + ps1-presence { > > > + label = "ps1-presence"; > > > + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; > > > + linux,code = <ASPEED_GPIO(F, 1)>; > > > + }; > > > + > > > + }; > > > + > > > + gpio-keys-polled { > > > + compatible = "gpio-keys-polled"; > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + poll-interval = <1000>; > > > + > > > + fan0-presence { > > > + label = "fan0-presence"; > > > + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; > > > + linux,code = <0>; > > > + }; > > > + > > > + fan1-presence { > > > + label = "fan1-presence"; > > > + gpios = <&pca1 1 GPIO_ACTIVE_LOW>; > > > + linux,code = <1>; > > > + }; > > > + > > > + fan2-presence { > > > + label = "fan2-presence"; > > > + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; > > > + linux,code = <2>; > > > + }; > > > + > > > + fan3-presence { > > > + label = "fan3-presence"; > > > + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; > > > + linux,code = <3>; > > > + }; > > > + > > > + fan4-presence { > > > + label = "fan4-presence"; > > > + gpios = <&pca1 4 GPIO_ACTIVE_LOW>; > > > + linux,code = <4>; > > > + }; > > > + > > > + fan5-presence { > > > + label = "fan5-presence"; > > > + gpios = <&pca1 5 GPIO_ACTIVE_LOW>; > > > + linux,code = <5>; > > > + }; > > > + > > > + fan6-presence { > > > + label = "fan6-presence"; > > > + gpios = <&pca1 6 GPIO_ACTIVE_LOW>; > > > + linux,code = <6>; > > > + }; > > > + > > > + fan7-presence { > > > + label = "fan7-presence"; > > > + gpios = <&pca1 7 GPIO_ACTIVE_LOW>; > > > + linux,code = <7>; > > > + }; > > > + }; > > > + > > > + leds { > > > + compatible = "gpio-leds"; > > > + > > > + power { > > > + label = "power"; > > > + /* TODO: dummy gpio */ > > > + gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>; > > > + }; > > > + > > > + }; > > > + > > > + iio-hwmon-battery { > > > + compatible = "iio-hwmon"; > > > + io-channels = <&adc 15>; > > > + }; > > > + > > > + iio-hwmon { > > > + compatible = "iio-hwmon"; > > > + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, > > > + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>, > > > + <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>; > > > + }; > > > + > > > +}; > > > + > > > +&fmc { > > > + status = "okay"; > > > + > > > + flash@0 { > > > + status = "okay"; > > > + label = "bmc"; > > > + m25p,fast-read; > > > + spi-max-frequency = <50000000>; > > > +#include "openbmc-flash-layout.dtsi" > > > + }; > > > +}; > > > + > > > +&spi1 { > > > + status = "okay"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_spi1_default>; > > > + > > > + flash@0 { > > > + status = "okay"; > > > + label = "pnor"; > > > + m25p,fast-read; > > > + spi-max-frequency = <100000000>; > > > + }; > > > +}; > > > + > > > +&uart1 { > > > + /* Rear RS-232 connector */ > > > + status = "okay"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_txd1_default > > > + &pinctrl_rxd1_default > > > + &pinctrl_nrts1_default > > > + &pinctrl_ndtr1_default > > > + &pinctrl_ndsr1_default > > > + &pinctrl_ncts1_default > > > + &pinctrl_ndcd1_default > > > + &pinctrl_nri1_default>; > > > +}; > > > + > > > +&uart2 { > > > + /* Test Point */ > > > + status = "okay"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; > > > +}; > > > + > > > +&uart3 { > > > + /* APSS */ > > > + status = "okay"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; > > > +}; > > > + > > > +&uart5 { > > > + status = "okay"; > > > +}; > > > + > > > +&lpc_ctrl { > > > + status = "okay"; > > > + memory-region = <&flash_memory>; > > > + flash = <&spi1>; > > > +}; > > > + > > > +&mbox { > > > + status = "okay"; > > Are you sure this is necessary? We're planning to drop mbox support in the near > future, so just want to make sure you're aware of that. I am not sure. I just know that bmc can not host without [mboxd](https://github.com/openbmc/hiomapd). > > > > +}; > > > + > > > +&mac0 { > > > + status = "okay"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_rmii1_default>; > > > + use-ncsi; > > > +}; > > > + > > > +&mac1 { > > > + status = "okay"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; > > > +}; > > > + > > > +&i2c0 { > > > + /* LCD */ > > > + status = "okay"; > > > +}; > > > + > > > +&i2c1 { > > > + status = "okay"; > > > + > > > + eeprom@50 { > > > + compatible = "atmel,24c256"; > > > + reg = <0x50>; > > > + label = "fru"; > > > + }; > > > + > > > +}; > > > + > > > +&i2c2 { > > > + status = "okay"; > > > + > > > + tmp112@48 { > > > + compatible = "ti,tmp112"; > > > + reg = <0x48>; > > > + label = "inlet"; > > > + }; > > > + > > > + tmp112@49 { > > > + compatible = "ti,tmp112"; > > > + reg = <0x49>; > > > + label = "outlet"; > > > + }; > > > + > > > + i2c-switch@70 { > > > + compatible = "nxp,pca9546"; > > > + reg = <0x70>; > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + i2c@0 { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + reg = <0>; > > > + > > > + tmp112@4a { > > > + compatible = "ti,tmp112"; > > > + reg = <0x4a>; > > > + label = "psu_inlet"; > > > + }; > > > + > > > + }; > > > + > > > + i2c@1 { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + reg = <1>; > > > + > > > + tmp112@4a { > > > + compatible = "ti,tmp112"; > > > + reg = <0x4a>; > > > + label = "ocp_zone"; > > > + }; > > > + }; > > > + > > > + i2c@2 { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + reg = <2>; > > > + > > > + tmp112@4a { > > > + compatible = "ti,tmp112"; > > > + reg = <0x4a>; > > > + label = "bmc_zone"; > > > + }; > > > + }; > > > + > > > + i2c@3 { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + reg = <3>; > > > + > > > + tmp112@7c { > > > + compatible = "emc1413"; > > Should have a "microchip," prefix? Sure. > > > > + reg = <0x7c>; > > > + }; > > > + }; > > > + > > > + }; > > > +}; > > > + > > > +&i2c3 { > > > + /* Riser Card */ > > > + status = "okay"; > > > +}; > > > + > > > +&i2c4 { > > > + status = "okay"; > > > + > > > + rtc@68 { > > > + compatible = "dallas,ds3232"; > > > + reg = <0x68>; > > > + }; > > > +}; > > > + > > > +&i2c5 { > > > + /* vr */ > > > + status = "okay"; > > > +}; > > > + > > > +&i2c6 { > > > + /* bp card */ > > > + status = "okay"; > > > +}; > > > + > > > +&i2c7 { > > > + status = "okay"; > > > + > > > + i2c-switch@70 { > > > + compatible = "nxp,pca9546"; > > > + reg = <0x70>; > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + i2c@0 { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + reg = <0>; > > > + > > > + adm1278@10 { > > > + compatible = "adi,adm1278"; > > > + reg = <0x10>; > > > + }; > > > + > > > + adm1278@13 { > > > + compatible = "adi,adm1278"; > > > + reg = <0x13>; > > > + }; > > > + > > > + adm1278@50 { > > > + compatible = "adi,adm1278"; > > > + reg = <0x50>; > > > + }; > > > + > > > + adm1278@53 { > > > + compatible = "adi,adm1278"; > > > + reg = <0x53>; > > > + }; > > > + > > > + }; > > > + > > > + /*pcie riser*/ > > > + > > > + }; > > > +}; > > > + > > > +&i2c8 { > > > + status = "okay"; > > > + > > > + pca0: pca9555@20 { > > > + compatible = "nxp,pca9555"; > > > + reg = <0x20>; > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + gpio-controller; > > > + #gpio-cells = <2>; > > > + > > > + gpio@0 { > > > + reg = <0>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@1 { > > > + reg = <1>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@2 { > > > + reg = <2>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@3 { > > > + reg = <3>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@4 { > > > + reg = <4>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@5 { > > > + reg = <5>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@6 { > > > + reg = <6>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@7 { > > > + reg = <7>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + }; > > > + > > > + pca1: pca9555@21 { > > > + compatible = "nxp,pca9555"; > > > + reg = <0x21>; > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + gpio-controller; > > > + #gpio-cells = <2>; > > > + > > > + gpio@0 { > > > + reg = <0>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@1 { > > > + reg = <1>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@2 { > > > + reg = <2>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@3 { > > > + reg = <3>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@4 { > > > + reg = <4>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@5 { > > > + reg = <5>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@6 { > > > + reg = <6>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@7 { > > > + reg = <7>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + }; > > > + > > > + pca2: pca9555@22 { > > > + compatible = "nxp,pca9555"; > > > + reg = <0x22>; > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + gpio-controller; > > > + #gpio-cells = <2>; > > > + > > > + gpio@0 { > > > + reg = <0>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@1 { > > > + reg = <1>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@2 { > > > + reg = <2>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@3 { > > > + reg = <3>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@4 { > > > + reg = <4>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@5 { > > > + reg = <5>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@6 { > > > + reg = <6>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@7 { > > > + reg = <7>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + }; > > > + > > > + pca3: pca9555@23 { > > > + compatible = "nxp,pca9555"; > > > + reg = <0x23>; > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + gpio-controller; > > > + #gpio-cells = <2>; > > > + > > > + gpio@0 { > > > + reg = <0>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@1 { > > > + reg = <1>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@2 { > > > + reg = <2>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@3 { > > > + reg = <3>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@4 { > > > + reg = <4>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@5 { > > > + reg = <5>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@6 { > > > + reg = <6>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@7 { > > > + reg = <7>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + }; > > > + > > > + pca4: pca9555@24 { > > > + compatible = "nxp,pca9555"; > > > + reg = <0x24>; > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + gpio-controller; > > > + #gpio-cells = <2>; > > > + > > > + gpio@0 { > > > + reg = <0>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@1 { > > > + reg = <1>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@2 { > > > + reg = <2>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@3 { > > > + reg = <3>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@4 { > > > + reg = <4>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@5 { > > > + reg = <5>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@6 { > > > + reg = <6>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@7 { > > > + reg = <7>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + }; > > > + > > > + pca5: pca9555@25 { > > > + compatible = "nxp,pca9555"; > > > + reg = <0x25>; > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + gpio-controller; > > > + #gpio-cells = <2>; > > > + > > > + gpio@0 { > > > + reg = <0>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@1 { > > > + reg = <1>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@2 { > > > + reg = <2>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@3 { > > > + reg = <3>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@4 { > > > + reg = <4>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@5 { > > > + reg = <5>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@6 { > > > + reg = <6>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + > > > + gpio@7 { > > > + reg = <7>; > > > + type = <PCA955X_TYPE_GPIO>; > > > + }; > > > + }; > > > + > > > +}; > > > + > > > +&i2c9 { > > > + /* cpld */ > > > + status = "okay"; > > > +}; > > > + > > > +&i2c10 { > > > + /* hdd bp */ > > > + status = "okay"; > > > +}; > > > + > > > +&i2c11 { > > > + status = "okay"; > > > + > > > + power-supply@58 { > > > + compatible = "pmbus"; > > > + reg = <0x58>; > > > + }; > > > + > > > + power-supply@5a { > > > + compatible = "pmbus"; > > > + reg = <0x5a>; > > > + }; > > > +}; > > > + > > > +&i2c12 { > > > + /* odcc */ > > > + status = "okay"; > > > +}; > > > + > > > +&vuart { > > > + status = "okay"; > > > +}; > > > + > > > +&gfx { > > > + status = "okay"; > > > + memory-region = <&gfx_memory>; > > > +}; > > > + > > > +&pinctrl { > > > + aspeed,external-nodes = <&gfx &lhc>; > > > +}; > > > + > > > +&gpio { > > > + pin_gpio_b7 { > > > + gpio-hog; > > > + gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>; > > > + output-high; > > > + line-name = "BMC_INIT_OK"; > > > + }; > > > +}; > > > + > > > +&wdt1 { > > > + aspeed,reset-type = "none"; > > > + aspeed,external-signal; > > > + aspeed,ext-push-pull; > > > + aspeed,ext-active-high; > > > + > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_wdtrst1_default>; > > > +}; > > > + > > > +&ibt { > > > + status = "okay"; > > > + > > > +}; > > > + > > > +&adc { > > > + status = "okay"; > > Please add the pinctrl properties to mux the necessary ADC lines which you have > associated with the iio-hwmon bridge (you've used lines 0-14). ack > > Cheers, > > Andrew
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index bed2047..31db1d3 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1256,6 +1256,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-cmm.dtb \ aspeed-bmc-facebook-tiogapass.dtb \ aspeed-bmc-intel-s2600wf.dtb \ + aspeed-bmc-inspur-fp5280g2.dtb \ aspeed-bmc-lenovo-hr630.dtb \ aspeed-bmc-microsoft-olympus.dtb \ aspeed-bmc-opp-lanyang.dtb \ diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts new file mode 100644 index 0000000..771de77 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts @@ -0,0 +1,843 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "FP5280G2 BMC"; + compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + coldfire_memory: codefire_memory@9ef00000 { + reg = <0x9ef00000 0x00100000>; + no-map; + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + memory-region = <&coldfire_memory>; + aspeed,sram = <&sram>; + aspeed,cvic = <&cvic>; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(B, 3)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 0)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 1)>; + }; + + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; + linux,code = <0>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca1 1 GPIO_ACTIVE_LOW>; + linux,code = <1>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; + linux,code = <2>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; + linux,code = <3>; + }; + + fan4-presence { + label = "fan4-presence"; + gpios = <&pca1 4 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + fan5-presence { + label = "fan5-presence"; + gpios = <&pca1 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan6-presence { + label = "fan6-presence"; + gpios = <&pca1 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan7-presence { + label = "fan7-presence"; + gpios = <&pca1 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "power"; + /* TODO: dummy gpio */ + gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>; + }; + + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 15>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>, + <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>; + }; + +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* Test Point */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart3 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mbox { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + /* LCD */ + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + label = "fru"; + }; + +}; + +&i2c2 { + status = "okay"; + + tmp112@48 { + compatible = "ti,tmp112"; + reg = <0x48>; + label = "inlet"; + }; + + tmp112@49 { + compatible = "ti,tmp112"; + reg = <0x49>; + label = "outlet"; + }; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tmp112@4a { + compatible = "ti,tmp112"; + reg = <0x4a>; + label = "psu_inlet"; + }; + + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tmp112@4a { + compatible = "ti,tmp112"; + reg = <0x4a>; + label = "ocp_zone"; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + tmp112@4a { + compatible = "ti,tmp112"; + reg = <0x4a>; + label = "bmc_zone"; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + tmp112@7c { + compatible = "emc1413"; + reg = <0x7c>; + }; + }; + + }; +}; + +&i2c3 { + /* Riser Card */ + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; +}; + +&i2c5 { + /* vr */ + status = "okay"; +}; + +&i2c6 { + /* bp card */ + status = "okay"; +}; + +&i2c7 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + adm1278@10 { + compatible = "adi,adm1278"; + reg = <0x10>; + }; + + adm1278@13 { + compatible = "adi,adm1278"; + reg = <0x13>; + }; + + adm1278@50 { + compatible = "adi,adm1278"; + reg = <0x50>; + }; + + adm1278@53 { + compatible = "adi,adm1278"; + reg = <0x53>; + }; + + }; + + /*pcie riser*/ + + }; +}; + +&i2c8 { + status = "okay"; + + pca0: pca9555@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + }; + + pca1: pca9555@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca2: pca9555@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca3: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca4: pca9555@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca5: pca9555@25 { + compatible = "nxp,pca9555"; + reg = <0x25>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + +}; + +&i2c9 { + /* cpld */ + status = "okay"; +}; + +&i2c10 { + /* hdd bp */ + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + power-supply@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + power-supply@5a { + compatible = "pmbus"; + reg = <0x5a>; + }; +}; + +&i2c12 { + /* odcc */ + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&gpio { + pin_gpio_b7 { + gpio-hog; + gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>; + output-high; + line-name = "BMC_INIT_OK"; + }; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&ibt { + status = "okay"; + +}; + +&adc { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default + &pinctrl_pwm6_default &pinctrl_pwm7_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>; + }; + + fan@5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>; + }; + + fan@6 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>; + }; + + fan@7 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>; + }; + +}; + +#include "ibm-power9-dual.dtsi"
The fp5280g2 is an open-power server platform with an aspeed ast2500 BMC Signed-off-by: John Wang <wangzqbj@inspur.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 843 +++++++++++++++++++++++ 2 files changed, 844 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts