[V2] board/friendlyarm: Add initial support for NanoPc T4 board
diff mbox series

Message ID 20190604073325.10083-1-shyam.saini@amarulasolutions.com
State New
Headers show
Series
  • [V2] board/friendlyarm: Add initial support for NanoPc T4 board
Related show

Commit Message

Shyam Saini June 4, 2019, 7:33 a.m. UTC
This initial support includes:
	Linux 5.1
	Custom U-Boot
	Arm Trusted Firmware v2.0
	Buildroot default packages

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
---
Changelogs:
V1->V2: Use linux 5.1
	Add empty line after section header
	Add space after # in defconfig
	Fix alphabetical order in DEVELOPERS file
---
 .gitlab-ci.yml                            |  1 +
 DEVELOPERS                                | 10 +++---
 board/friendlyarm/nanopc-t4/extlinux.conf |  4 +++
 board/friendlyarm/nanopc-t4/genimage.cfg  | 22 +++++++++++++
 board/friendlyarm/nanopc-t4/post-build.sh |  8 +++++
 board/friendlyarm/nanopc-t4/readme.txt    | 49 +++++++++++++++++++++++++++
 configs/nanopc_t4_defconfig               | 55 +++++++++++++++++++++++++++++++
 7 files changed, 145 insertions(+), 4 deletions(-)
 create mode 100644 board/friendlyarm/nanopc-t4/extlinux.conf
 create mode 100644 board/friendlyarm/nanopc-t4/genimage.cfg
 create mode 100755 board/friendlyarm/nanopc-t4/post-build.sh
 create mode 100644 board/friendlyarm/nanopc-t4/readme.txt
 create mode 100644 configs/nanopc_t4_defconfig

Patch
diff mbox series

diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 5b842762f1..5ed1b8f4d5 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -176,6 +176,7 @@  mx53loco_defconfig: { extends: .defconfig }
 mx6cubox_defconfig: { extends: .defconfig }
 mx6sx_udoo_neo_defconfig: { extends: .defconfig }
 mx6udoo_defconfig: { extends: .defconfig }
+nanopc_t4_defconfig: { extends: .defconfig }
 nanopi_m1_defconfig: { extends: .defconfig }
 nanopi_m1_plus_defconfig: { extends: .defconfig }
 nanopi_m4_defconfig: { extends: .defconfig }
diff --git a/DEVELOPERS b/DEVELOPERS
index e4a089e6f5..a4b2c3da95 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2042,12 +2042,14 @@  F:	package/ubus/
 F:	package/wolfssl/
 
 N:     Shyam Saini <shyam.saini@amarulasolutions.com>
-F:     board/friendlyarm/nanopi-m4/
-F:     configs/nanopi_m4_defconfig
-F:     board/orangepi/orangepi-rk3399/
-F:     configs/orangepi_rk3399_defconfig
+F:	board/friendlyarm/nanopi-m4/
+F:	board/friendlyarm/nanopc-t4/
 F:	board/olimex/a33_olinuxino/
+F:	board/orangepi/orangepi-rk3399/
+F:	configs/nanopi_m4_defconfig
+F:	configs/nanopc_t4_defconfig
 F:	configs/olimex_a33_olinuxino_defconfig
+F:	configs/orangepi_rk3399_defconfig
 
 N:	Simon Dawson <spdawson@gmail.com>
 F:	boot/at91bootstrap3/
diff --git a/board/friendlyarm/nanopc-t4/extlinux.conf b/board/friendlyarm/nanopc-t4/extlinux.conf
new file mode 100644
index 0000000000..b09c20db84
--- /dev/null
+++ b/board/friendlyarm/nanopc-t4/extlinux.conf
@@ -0,0 +1,4 @@ 
+label NanoPc T4
+  kernel /boot/Image
+  devicetree /boot/rk3399-nanopc-t4.dtb
+  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait
diff --git a/board/friendlyarm/nanopc-t4/genimage.cfg b/board/friendlyarm/nanopc-t4/genimage.cfg
new file mode 100644
index 0000000000..6404b0ad3b
--- /dev/null
+++ b/board/friendlyarm/nanopc-t4/genimage.cfg
@@ -0,0 +1,22 @@ 
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot-spl-dtb {
+		in-partition-table = "no"
+		image = "u-boot-spl-dtb.img"
+		offset = 32K
+	}
+
+	partition u-boot-dtb {
+		in-partition-table = "no"
+		image = "u-boot.itb"
+		offset = 8M
+		size = 30M
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
diff --git a/board/friendlyarm/nanopc-t4/post-build.sh b/board/friendlyarm/nanopc-t4/post-build.sh
new file mode 100755
index 0000000000..9b0c4ecc83
--- /dev/null
+++ b/board/friendlyarm/nanopc-t4/post-build.sh
@@ -0,0 +1,8 @@ 
+#!/bin/sh
+
+MKIMAGE=$HOST_DIR/bin/mkimage
+BOARD_DIR="$(dirname $0)"
+
+$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-spl-dtb.bin $BINARIES_DIR/u-boot-spl-dtb.img
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
diff --git a/board/friendlyarm/nanopc-t4/readme.txt b/board/friendlyarm/nanopc-t4/readme.txt
new file mode 100644
index 0000000000..dc2cd8444b
--- /dev/null
+++ b/board/friendlyarm/nanopc-t4/readme.txt
@@ -0,0 +1,49 @@ 
+Intro
+=====
+
+NanoPc T4 is a RK3399 SoC based ARM64 board.
+
+Official Wiki: http://wiki.friendlyarm.com/wiki/index.php/NanoPC-T4
+
+Build
+=====
+
+Run NanoPc T4 configuration
+
+  $ make nanopc_t4_defconfig
+
+To build, run make comamnd.
+
+  $ make
+
+Files created in output directory
+=================================
+
+output/images/
+
+├── bl31.bin
+├── bl31.elf
+├── Image
+├── rk3399-nanopc-t4.dtb
+├── rootfs.ext2
+├── rootfs.ext4 -> rootfs.ext2
+├── rootfs.tar
+├── sdcard.img
+├── u-boot.bin
+├── u-boot.itb
+├── u-boot-spl-dtb.bin
+└── u-boot-spl-dtb.img
+
+Creating bootable SD card:
+=========================
+
+Simply invoke (as root)
+
+  # dd if=output/images/sdcard.img of=/dev/sdX && sync
+
+Where X is your SD card device
+
+Serial console
+--------------
+
+Baudrate for this board is 1500000
diff --git a/configs/nanopc_t4_defconfig b/configs/nanopc_t4_defconfig
new file mode 100644
index 0000000000..dbf2082a03
--- /dev/null
+++ b/configs/nanopc_t4_defconfig
@@ -0,0 +1,55 @@ 
+# Architecture
+BR2_aarch64=y
+BR2_cortex_a72_a53=y
+
+# Linux headers same as kernel, a 5.1 series
+BR2_KERNEL_HEADERS_5_1=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="980ca75ae0438b4a1847d044605c492f3c844f88"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopc-t4-rk3399"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.1"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopc-t4"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_HOSTNAME="NanoPc T4"
+BR2_TARGET_GENERIC_ISSUE="Welcome to NanoPc T4!"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="512M"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopc-t4/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopc-t4/post-build.sh"