diff mbox series

[v2,1/2] dt-bindings: display: Add King Display KD035G6-54NT panel documentation

Message ID 20190603152555.23527-1-paul@crapouillou.net
State Not Applicable, archived
Headers show
Series [v2,1/2] dt-bindings: display: Add King Display KD035G6-54NT panel documentation | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Paul Cercueil June 3, 2019, 3:25 p.m. UTC
The KD035G6-54NT is a 3.5" 320x240 24-bit TFT LCD panel.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---

Notes:
    v2: - Add an address to the panel node
    	- Add information about SPI properties
    	- Add information about the 'port' sub-node

 .../panel/kingdisplay,kd035g6-54nt.txt        | 42 +++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt

Comments

Sam Ravnborg June 19, 2019, 12:28 p.m. UTC | #1
On Mon, Jun 03, 2019 at 05:25:54PM +0200, Paul Cercueil wrote:
> The KD035G6-54NT is a 3.5" 320x240 24-bit TFT LCD panel.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

Rob - ping for review.

	Sam

> ---
> 
> Notes:
>     v2: - Add an address to the panel node
>     	- Add information about SPI properties
>     	- Add information about the 'port' sub-node
> 
>  .../panel/kingdisplay,kd035g6-54nt.txt        | 42 +++++++++++++++++++
>  1 file changed, 42 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt
> new file mode 100644
> index 000000000000..fa9596082e44
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt
> @@ -0,0 +1,42 @@
> +King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "kingdisplay,kd035g6-54nt"
> +- power-supply: See panel-common.txt
> +- reset-gpios: See panel-common.txt
> +
> +Optional properties:
> +- backlight: see panel-common.txt
> +
> +The generic bindings for the SPI slaves documented in [1] also apply.
> +
> +The device node can contain one 'port' child node with one child
> +'endpoint' node, according to the bindings defined in [2]. This
> +node should describe panel's video bus.
> +
> +[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
> +[2]: Documentation/devicetree/bindings/graph.txt
> +
> +Example:
> +
> +&spi {
> +	panel@0 {
> +		compatible = "kingdisplay,kd035g6-54nt";
> +		reg = <0>;
> +
> +		spi-max-frequency = <3125000>;
> +		spi-3wire;
> +		spi-cs-high;
> +
> +		reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
> +
> +		backlight = <&backlight>;
> +		power-supply = <&ldo6>;
> +
> +		port {
> +			panel_input: endpoint {
> +				remote-endpoint = <&panel_output>;
> +			};
> +		};
> +	};
> +};
> -- 
> 2.21.0.593.g511ec345e18
Sam Ravnborg June 26, 2019, 12:42 p.m. UTC | #2
On Mon, Jun 03, 2019 at 05:25:54PM +0200, Paul Cercueil wrote:
> The KD035G6-54NT is a 3.5" 320x240 24-bit TFT LCD panel.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>

Both patches applied to drm-misc-next and pushed out.

	Sam
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt
new file mode 100644
index 000000000000..fa9596082e44
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt
@@ -0,0 +1,42 @@ 
+King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
+
+Required properties:
+- compatible: should be "kingdisplay,kd035g6-54nt"
+- power-supply: See panel-common.txt
+- reset-gpios: See panel-common.txt
+
+Optional properties:
+- backlight: see panel-common.txt
+
+The generic bindings for the SPI slaves documented in [1] also apply.
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [2]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
+[2]: Documentation/devicetree/bindings/graph.txt
+
+Example:
+
+&spi {
+	panel@0 {
+		compatible = "kingdisplay,kd035g6-54nt";
+		reg = <0>;
+
+		spi-max-frequency = <3125000>;
+		spi-3wire;
+		spi-cs-high;
+
+		reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+		backlight = <&backlight>;
+		power-supply = <&ldo6>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&panel_output>;
+			};
+		};
+	};
+};