Patchwork [v2] OMAP3: NAND: Adding NAND support and specifying NAND partitions.

login
register
mail settings
Submitter Hrishikesh Bhandiwad
Date Aug. 19, 2011, 10:17 a.m.
Message ID <ADF30F4D7BDE934D9B632CE7D5C7ACA4047C4D08A0BA@dbde03.ent.ti.com>
Download mbox | patch
Permalink /patch/110584/
State New
Headers show

Comments

Hrishikesh Bhandiwad - Aug. 19, 2011, 10:17 a.m.
Hi Tony,

As this patch is trivial can it be upstreamed ?
Thanks & Regards,
Hrishikesh

Patch

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b4d4346..3ac96d4 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -30,6 +30,9 @@ 
 #include <linux/usb/otg.h>
 #include <linux/smsc911x.h>

+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
 #include <linux/wl12xx.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
@@ -101,6 +104,37 @@  static void __init omap3_evm_get_revision(void)
        }
 }

+static struct mtd_partition omap3evm_nand_partitions[] = {
+       /* All the partition sizes are listed in terms of NAND block size */
+       {
+               .name           = "X-Loader",
+               .offset         = 0,
+               .size           = 4 * NAND_BLOCK_SIZE,
+               .mask_flags     = MTD_WRITEABLE,        /* force read-only */
+       },
+       {
+               .name           = "U-Boot",
+               .offset         = 0x80000,
+               .size           = 15 * NAND_BLOCK_SIZE,
+               .mask_flags     = MTD_WRITEABLE,        /* force read-only */
+       },
+       {
+               .name           = "U-Boot Env",
+               .offset         = 0x260000,
+               .size           = 1 * NAND_BLOCK_SIZE,
+       },
+       {
+               .name           = "Kernel",
+               .offset         = 0x280000,
+               .size           = 32 * NAND_BLOCK_SIZE,
+       },
+       {
+               .name           = "File System",
+               .offset         = 0x680000,
+               .size           = MTDPART_SIZ_FULL,
+       },
+};
+
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 #include <plat/gpmc-smsc911x.h>

@@ -696,6 +730,9 @@  static void __init omap3_evm_init(void)

        omap_serial_init();

+       omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
+                       ARRAY_SIZE(omap3evm_nand_partitions));
+
        /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
        usb_nop_xceiv_register();