@@ -424,41 +424,6 @@ static int emc_setup_hw(struct tegra_emc *emc)
return 0;
}
-static int emc_init(struct tegra_emc *emc, unsigned long rate)
-{
- int err;
-
- err = clk_set_parent(emc->emc_mux, emc->backup_clk);
- if (err) {
- dev_err(emc->dev,
- "failed to reparent to backup source: %d\n", err);
- return err;
- }
-
- err = clk_set_rate(emc->pll_m, rate);
- if (err) {
- dev_err(emc->dev,
- "failed to change pll_m rate: %d\n", err);
- return err;
- }
-
- err = clk_set_parent(emc->emc_mux, emc->pll_m);
- if (err) {
- dev_err(emc->dev,
- "failed to reparent to pll_m: %d\n", err);
- return err;
- }
-
- err = clk_set_rate(emc->clk, rate);
- if (err) {
- dev_err(emc->dev,
- "failed to change emc rate: %d\n", err);
- return err;
- }
-
- return 0;
-}
-
static int tegra_emc_probe(struct platform_device *pdev)
{
struct device_node *np;
@@ -550,18 +515,8 @@ static int tegra_emc_probe(struct platform_device *pdev)
goto put_backup;
}
- /* set DRAM clock rate to maximum */
- err = emc_init(emc, emc->timings[emc->num_timings - 1].rate);
- if (err) {
- dev_err(&pdev->dev, "failed to initialize EMC clock rate: %d\n",
- err);
- goto unreg_notifier;
- }
-
return 0;
-unreg_notifier:
- clk_notifier_unregister(emc->clk, &emc->clk_nb);
put_backup:
clk_put(emc->backup_clk);
put_pll_m:
The memory frequency scaling will be managed by tegra20-devfreq driver and PM QoS once all the prerequisite patches will get upstreamed. The parent clock is now managed by the clock driver and we also should assume that PLLM rate can't be changed on some devices (Galaxy Tab 10.1 for example). Altogether there is no point in touching of clock's rate from the EMC driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- drivers/memory/tegra/tegra20-emc.c | 45 ------------------------------ 1 file changed, 45 deletions(-)