[v3,1/2] dt-bindings: mtd: brcmnand: Make nand-ecc-strength and nand-ecc-step-size optional
diff mbox series

Message ID 1558449865-36852-1-git-send-email-kdasu.kdev@gmail.com
State Accepted
Delegated to: Miquel Raynal
Headers show
Series
  • [v3,1/2] dt-bindings: mtd: brcmnand: Make nand-ecc-strength and nand-ecc-step-size optional
Related show

Commit Message

Kamal Dasu May 21, 2019, 2:44 p.m. UTC
nand-ecc-strength and nand-ecc-step-size can be made optional as
brcmnand driver can support using raw NAND layer detected values.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Miquel Raynal June 3, 2019, 8:02 a.m. UTC | #1
On Tue, 2019-05-21 at 14:44:21 UTC, Kamal Dasu wrote:
> nand-ecc-strength and nand-ecc-step-size can be made optional as
> brcmnand driver can support using raw NAND layer detected values.
> 
> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
index bcda1df..0d952af 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
@@ -101,12 +101,12 @@  Required properties:
                               number (e.g., 0, 1, 2, etc.)
 - #address-cells            : see partition.txt
 - #size-cells               : see partition.txt
-- nand-ecc-strength         : see nand.txt
-- nand-ecc-step-size        : must be 512 or 1024. See nand.txt
 
 Optional properties:
+- nand-ecc-strength         : see nand-controller.yaml
+- nand-ecc-step-size        : must be 512 or 1024. See nand-controller.yaml
 - nand-on-flash-bbt         : boolean, to enable the on-flash BBT for this
-                              chip-select. See nand.txt
+                              chip-select. See nand-controller.yaml
 - brcm,nand-oob-sector-size : integer, to denote the spare area sector size
                               expected for the ECC layout in use. This size, in
                               addition to the strength and step-size,