From patchwork Fri May 17 12:38:40 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vidya Sagar X-Patchwork-Id: 1101027 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=nvidia.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=nvidia.com header.i=@nvidia.com header.b="K7XiBQsE"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 4557Dl5j5Xz9sD4 for ; Fri, 17 May 2019 22:40:39 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728593AbfEQMkf (ORCPT ); Fri, 17 May 2019 08:40:35 -0400 Received: from hqemgate15.nvidia.com ([216.228.121.64]:9759 "EHLO hqemgate15.nvidia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728749AbfEQMke (ORCPT ); Fri, 17 May 2019 08:40:34 -0400 Received: from hqpgpgate101.nvidia.com (Not Verified[216.228.121.13]) by hqemgate15.nvidia.com (using TLS: TLSv1.2, DES-CBC3-SHA) id ; Fri, 17 May 2019 05:39:50 -0700 Received: from hqmail.nvidia.com ([172.20.161.6]) by hqpgpgate101.nvidia.com (PGP Universal service); Fri, 17 May 2019 05:40:32 -0700 X-PGP-Universal: processed; by hqpgpgate101.nvidia.com on Fri, 17 May 2019 05:40:32 -0700 Received: from HQMAIL107.nvidia.com (172.20.187.13) by HQMAIL101.nvidia.com (172.20.187.10) with Microsoft SMTP Server (TLS) id 15.0.1473.3; Fri, 17 May 2019 12:40:32 +0000 Received: from hqnvemgw01.nvidia.com (172.20.150.20) by HQMAIL107.nvidia.com (172.20.187.13) with Microsoft SMTP Server (TLS) id 15.0.1473.3 via Frontend Transport; Fri, 17 May 2019 12:40:31 +0000 Received: from vidyas-desktop.nvidia.com (Not Verified[10.24.37.38]) by hqnvemgw01.nvidia.com with Trustwave SEG (v7, 5, 8, 10121) id ; Fri, 17 May 2019 05:40:32 -0700 From: Vidya Sagar To: , , , , , , , , , , CC: , , , , , , , , , Subject: [PATCH V7 09/15] dt-bindings: PCI: tegra: Add device tree support for Tegra194 Date: Fri, 17 May 2019 18:08:40 +0530 Message-ID: <20190517123846.3708-10-vidyas@nvidia.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190517123846.3708-1-vidyas@nvidia.com> References: <20190517123846.3708-1-vidyas@nvidia.com> X-NVConfidentiality: public MIME-Version: 1.0 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=nvidia.com; s=n1; t=1558096790; bh=hartIMFhcxcsz9goxNyak5NnzJQ7HpPyQO1jHkXBEKs=; h=X-PGP-Universal:From:To:CC:Subject:Date:Message-ID:X-Mailer: In-Reply-To:References:X-NVConfidentiality:MIME-Version: Content-Type; b=K7XiBQsEbcd/VeA7DkcB/SssAddlqbxTaEKEXUD+4V+kf7Za4CwgiG48KMHq94Xx8 2KwmIGw2/odZSh2YU3q+MiyBegpRflZppNT9sXp2bnHpuuhCQPkNgP7GUWV/z030+2 /pJJad88muhmocvRybeuBof+qGBhsu2yJccV57GK1C1V9yxelMxp5qgrc6OqDsoAkZ vC1k5Qx6iYiB3hTQ8KotEgJ3AxP0FmFadLyF3FGIEDrHIKkwjDZ9p6mHK2H8DijWdT 0t7epmbCcXKgnHIZDJ34DDacJZ4qY8unrh6yP70v10spXkmv7U3LpOXQAljzbunt8L Cw5EXEU78Vl5A== Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add support for Tegra194 PCIe controllers. These controllers are based on Synopsys DesignWare core IP. Signed-off-by: Vidya Sagar Reviewed-by: Rob Herring --- Changes since [v6]: * Changed description of the property "nvidia,bpmp". * Removed property "nvidia,disable-aspm-states". Changes since [v5]: * Removed 'max-link-speed' as it is going to be a common sub-system property * Removed 'nvidia,init-link-speed' as there isn't much value addition * Removed 'nvidia,wake-gpios' for now * Addressed review comments from Thierry and Rob in general Changes since [v4]: * None Changes since [v3]: * None Changes since [v2]: * Using only 'Cx' (x-being controller number) format to represent a controller * Changed to 'value: description' format where applicable * Changed 'nvidia,init-speed' to 'nvidia,init-link-speed' * Provided more documentation for 'nvidia,init-link-speed' property * Changed 'nvidia,pex-wake' to 'nvidia,wake-gpios' Changes since [v1]: * Added documentation for 'power-domains' property * Removed 'window1' and 'window2' properties * Removed '_clk' and '_rst' from clock and reset names * Dropped 'pcie' from phy-names * Added entry for BPMP-FW handle * Removed offsets for some of the registers and added them in code and would be pickedup based on controller ID * Changed 'nvidia,max-speed' to 'max-link-speed' and is made as an optional * Changed 'nvidia,disable-clock-request' to 'supports-clkreq' with inverted operation * Added more documentation for 'nvidia,update-fc-fixup' property * Removed 'nvidia,enable-power-down' and 'nvidia,plat-gpios' properties * Added '-us' to all properties that represent time in microseconds * Moved P2U documentation to a separate file .../bindings/pci/nvidia,tegra194-pcie.txt | 158 ++++++++++++++++++ 1 file changed, 158 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt new file mode 100644 index 000000000000..0119f40bbd11 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt @@ -0,0 +1,158 @@ +NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based) + +This PCIe host controller is based on the Synopsis Designware PCIe IP +and thus inherits all the common properties defined in designware-pcie.txt. + +Required properties: +- compatible: For Tegra19x, must contain "nvidia,tegra194-pcie". +- device_type: Must be "pci" +- power-domains: A phandle to the node that controls power to the respective + PCIe controller and a specifier name for the PCIe controller. Following are + the specifiers for the different PCIe controllers + TEGRA194_POWER_DOMAIN_PCIEX8B: C0 + TEGRA194_POWER_DOMAIN_PCIEX1A: C1 + TEGRA194_POWER_DOMAIN_PCIEX1A: C2 + TEGRA194_POWER_DOMAIN_PCIEX1A: C3 + TEGRA194_POWER_DOMAIN_PCIEX4A: C4 + TEGRA194_POWER_DOMAIN_PCIEX8A: C5 + these specifiers are defined in + "include/dt-bindings/power/tegra194-powergate.h" file. +- reg: A list of physical base address and length pairs for each set of + controller registers. Must contain an entry for each entry in the reg-names + property. +- reg-names: Must include the following entries: + "appl": Controller's application logic registers + "config": As per the definition in designware-pcie.txt + "atu_dma": iATU and DMA registers. This is where the iATU (internal Address + Translation Unit) registers of the PCIe core are made available + for SW access. + "dbi": The aperture where root port's own configuration registers are + available +- interrupts: A list of interrupt outputs of the controller. Must contain an + entry for each entry in the interrupt-names property. +- interrupt-names: Must include the following entries: + "intr": The Tegra interrupt that is asserted for controller interrupts + "msi": The Tegra interrupt that is asserted when an MSI is received +- bus-range: Range of bus numbers associated with this controller +- #address-cells: Address representation for root ports (must be 3) + - cell 0 specifies the bus and device numbers of the root port: + [23:16]: bus number + [15:11]: device number + - cell 1 denotes the upper 32 address bits and should be 0 + - cell 2 contains the lower 32 address bits and is used to translate to the + CPU address space +- #size-cells: Size representation for root ports (must be 2) +- ranges: Describes the translation of addresses for root ports and standard + PCI regions. The entries must be 7 cells each, where the first three cells + correspond to the address as described for the #address-cells property + above, the fourth and fifth cells are for the physical CPU address to + translate to and the sixth and seventh cells are as described for the + #size-cells property above. + - Entries setup the mapping for the standard I/O, memory and + prefetchable PCI regions. The first cell determines the type of region + that is setup: + - 0x81000000: I/O memory region + - 0x82000000: non-prefetchable memory region + - 0xc2000000: prefetchable memory region + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- #interrupt-cells: Size representation for interrupts (must be 1) +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - core +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - core_apb + - core +- phys: Must contain a phandle to P2U PHY for each entry in phy-names. +- phy-names: Must include an entry for each active lane. + "p2u-N": where N ranges from 0 to one less than the total number of lanes +- nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed + by controller-id. Following are the controller ids for each controller. + 0: C0 + 1: C1 + 2: C2 + 3: C3 + 4: C4 + 5: C5 +- vddio-pex-ctl-supply: Regulator supply for PCIe side band signals + +Optional properties: +- supports-clkreq: Refer to Documentation/devicetree/bindings/pci/pci.txt +- nvidia,update-fc-fixup: This is a boolean property and needs to be present to + improve perf when a platform is designed in such a way that it satisfies at + least one of the following conditions thereby enabling root port to + exchange optimum number of FC (Flow Control) credits with downstream devices + 1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS) + 2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and + a) speed is Gen-2 and MPS is 256B + b) speed is >= Gen-3 with any MPS +- "nvidia,aspm-cmrt-us": Common Mode Restore time for proper operation of ASPM + to be specified in microseconds +- "nvidia,aspm-pwr-on-t-us": Power On time for proper operation of ASPM to be + specified in microseconds +- "nvidia,aspm-l0s-entrance-latency-us": ASPM L0s entrance latency to be + specified in microseconds + +Examples: +========= + +Tegra194: +-------- + +SoC DTSI: + + pcie@14180000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; + reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x38040000 0x0 0x00040000>; /* iATU_DMA reg space (256K) */ + reg-names = "appl", "config", "atu_dma"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + linux,pci-domain = <0>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_0>; + reset-names = "core_apb", "core"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 72 0x04>; + + nvidia,bpmp = <&bpmp>; + + supports-clkreq; + nvidia,disable-aspm-states = <0xf>; + nvidia,controller-id = <0>; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0x82000000 0x0 0x38200000 0x0 0x38200000 0x0 0x01E00000 /* non-prefetchable memory (30MB) */ + 0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory (16GB) */ + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>, + <&p2u_hsio_5>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + };