[1/5] dt-bindings: phy: dp83867: Describe how driver behavesw.r.t rgmii delay
diff mbox series

Message ID 20190510214550.18657-1-tpiepho@impinj.com
State Superseded
Headers show
Series
  • [1/5] dt-bindings: phy: dp83867: Describe how driver behavesw.r.t rgmii delay
Related show

Checks

Context Check Description
robh/checkpatch success

Commit Message

Trent Piepho May 10, 2019, 9:46 p.m. UTC
Add a note to make it more clear how the driver behaves when "rgmii" vs
"rgmii-id", "rgmii-idrx", or "rgmii-idtx" interface modes are selected.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
---
 Documentation/devicetree/bindings/net/ti,dp83867.txt | 6 ++++++
 1 file changed, 6 insertions(+)

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
index 9ef9338aaee1..e97f54aeac77 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.txt
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt
@@ -11,6 +11,12 @@  Required properties:
 	- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
 		for applicable values
 
+Note: If the interface type is PHY_INTERFACE_MODE_RGMII the TX/RX clock delays
+      will be left at their default values, as set by the PHY's pin strapping.
+      The default strapping will use a delay of 2.00 ns.  Thus
+      PHY_INTERFACE_MODE_RGMII by default does not behave as RGMII with no
+      internal delay, but as PHY_INTERFACE_MODE_RGMII_ID.
+
 Optional property:
 	- ti,min-output-impedance - MAC Interface Impedance control to set
 				    the programmable output impedance to