Patchwork [2/6] arm/imx: remove the uses of gpio_to_irq()

login
register
mail settings
Submitter Shawn Guo
Date Aug. 12, 2011, 7:54 a.m.
Message ID <1313135701-22456-3-git-send-email-shawn.guo@linaro.org>
Download mbox | patch
Permalink /patch/109784/
State New
Headers show

Comments

Shawn Guo - Aug. 12, 2011, 7:54 a.m.
gpio_to_irq() is too generic to be defined and used by i.mx platform
code.  The patch defines IMX_GPIO_TO_IRQ() in mach/hardware.h and
replaces all the uses of gpio_to_irq() with IMX_GPIO_TO_IRQ().

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/mach-armadillo5x0.c        |    3 ++-
 arch/arm/mach-imx/mach-cpuimx35.c            |    2 +-
 arch/arm/mach-imx/mach-mx27_3ds.c            |    8 ++++----
 arch/arm/mach-imx/mach-mx31moboard.c         |    4 ++--
 arch/arm/mach-imx/mach-mx35_3ds.c            |    2 +-
 arch/arm/mach-imx/mach-vpr200.c              |    2 +-
 arch/arm/mach-imx/mx31moboard-devboard.c     |    4 ++--
 arch/arm/mach-imx/mx31moboard-marxbot.c      |    4 ++--
 arch/arm/mach-mx5/board-cpuimx51.c           |    8 ++++----
 arch/arm/mach-mx5/board-cpuimx51sd.c         |    4 ++--
 arch/arm/mach-mx5/board-mx51_3ds.c           |    2 +-
 arch/arm/mach-mx5/board-mx53_ard.c           |    4 ++--
 arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c |    4 ++--
 arch/arm/mach-mx5/mx51_efika.c               |    2 +-
 arch/arm/plat-mxc/include/mach/hardware.h    |    2 ++
 15 files changed, 29 insertions(+), 26 deletions(-)
Russell King - ARM Linux - Aug. 12, 2011, 8 a.m.
On Fri, Aug 12, 2011 at 03:54:57PM +0800, Shawn Guo wrote:
> gpio_to_irq() is too generic to be defined and used by i.mx platform
> code.  The patch defines IMX_GPIO_TO_IRQ() in mach/hardware.h and
> replaces all the uses of gpio_to_irq() with IMX_GPIO_TO_IRQ().

That makes no sense.  Why not continue to use gpio_to_irq() but provide
the .to_irq method in your gpiolib driver so it can work, and use that
in the places where its used at runtime?

(You won't be able to use it for static initialization obviously.)
Shawn Guo - Aug. 12, 2011, 8:22 a.m.
On Fri, Aug 12, 2011 at 09:00:00AM +0100, Russell King - ARM Linux wrote:
> On Fri, Aug 12, 2011 at 03:54:57PM +0800, Shawn Guo wrote:
> > gpio_to_irq() is too generic to be defined and used by i.mx platform
> > code.  The patch defines IMX_GPIO_TO_IRQ() in mach/hardware.h and
> > replaces all the uses of gpio_to_irq() with IMX_GPIO_TO_IRQ().
> 
> That makes no sense.  Why not continue to use gpio_to_irq() but provide
> the .to_irq method in your gpiolib driver so it can work, and use that
> in the places where its used at runtime?
> 
I did provide .to_irq in patch #3. 

> (You won't be able to use it for static initialization obviously.)
> 
All users of gpio_to_irq() in platform codes are static initialization.
And IMX_GPIO_TO_IRQ() is actually a renaming of gpio_to_irq().  Only
difference there is naming and place change, which I think is good, no?
Shawn Guo - Aug. 12, 2011, 8:25 a.m.
On Fri, Aug 12, 2011 at 04:22:12PM +0800, Shawn Guo wrote:
> On Fri, Aug 12, 2011 at 09:00:00AM +0100, Russell King - ARM Linux wrote:
> > On Fri, Aug 12, 2011 at 03:54:57PM +0800, Shawn Guo wrote:
> > > gpio_to_irq() is too generic to be defined and used by i.mx platform
> > > code.  The patch defines IMX_GPIO_TO_IRQ() in mach/hardware.h and
> > > replaces all the uses of gpio_to_irq() with IMX_GPIO_TO_IRQ().
> > 
> > That makes no sense.  Why not continue to use gpio_to_irq() but provide
> > the .to_irq method in your gpiolib driver so it can work, and use that
> > in the places where its used at runtime?
> > 
> I did provide .to_irq in patch #3. 
> 
> > (You won't be able to use it for static initialization obviously.)
> > 
> All users of gpio_to_irq() in platform codes are static initialization.

Sorry, not all but most.

> And IMX_GPIO_TO_IRQ() is actually a renaming of gpio_to_irq().  Only
> difference there is naming and place change, which I think is good, no?
> 

But adding IMX namespace is still worth of the LOC changes?
Russell King - ARM Linux - Aug. 12, 2011, 8:57 a.m.
On Fri, Aug 12, 2011 at 04:25:39PM +0800, Shawn Guo wrote:
> On Fri, Aug 12, 2011 at 04:22:12PM +0800, Shawn Guo wrote:
> > On Fri, Aug 12, 2011 at 09:00:00AM +0100, Russell King - ARM Linux wrote:
> > > On Fri, Aug 12, 2011 at 03:54:57PM +0800, Shawn Guo wrote:
> > > > gpio_to_irq() is too generic to be defined and used by i.mx platform
> > > > code.  The patch defines IMX_GPIO_TO_IRQ() in mach/hardware.h and
> > > > replaces all the uses of gpio_to_irq() with IMX_GPIO_TO_IRQ().
> > > 
> > > That makes no sense.  Why not continue to use gpio_to_irq() but provide
> > > the .to_irq method in your gpiolib driver so it can work, and use that
> > > in the places where its used at runtime?
> > > 
> > I did provide .to_irq in patch #3. 
> > 
> > > (You won't be able to use it for static initialization obviously.)
> > > 
> > All users of gpio_to_irq() in platform codes are static initialization.
> 
> Sorry, not all but most.

It would probably be a good idea to leave the runtime places using
gpio_to_irq() and only convert the static initializers.

> > And IMX_GPIO_TO_IRQ() is actually a renaming of gpio_to_irq().  Only
> > difference there is naming and place change, which I think is good, no?
> > 
> 
> But adding IMX namespace is still worth of the LOC changes?

Well, the static initializers still need something... the alternative is
to initialize them at runtime which probably wouldn't be so nice.
Shawn Guo - Aug. 12, 2011, 9:27 a.m.
On Fri, Aug 12, 2011 at 09:57:59AM +0100, Russell King - ARM Linux wrote:
> On Fri, Aug 12, 2011 at 04:25:39PM +0800, Shawn Guo wrote:
> > On Fri, Aug 12, 2011 at 04:22:12PM +0800, Shawn Guo wrote:
> > > On Fri, Aug 12, 2011 at 09:00:00AM +0100, Russell King - ARM Linux wrote:
> > > > On Fri, Aug 12, 2011 at 03:54:57PM +0800, Shawn Guo wrote:
> > > > > gpio_to_irq() is too generic to be defined and used by i.mx platform
> > > > > code.  The patch defines IMX_GPIO_TO_IRQ() in mach/hardware.h and
> > > > > replaces all the uses of gpio_to_irq() with IMX_GPIO_TO_IRQ().
> > > > 
> > > > That makes no sense.  Why not continue to use gpio_to_irq() but provide
> > > > the .to_irq method in your gpiolib driver so it can work, and use that
> > > > in the places where its used at runtime?
> > > > 
> > > I did provide .to_irq in patch #3. 
> > > 
> > > > (You won't be able to use it for static initialization obviously.)
> > > > 
> > > All users of gpio_to_irq() in platform codes are static initialization.
> > 
> > Sorry, not all but most.
> 
> It would probably be a good idea to leave the runtime places using
> gpio_to_irq() and only convert the static initializers.
> 
Ok.

> > > And IMX_GPIO_TO_IRQ() is actually a renaming of gpio_to_irq().  Only
> > > difference there is naming and place change, which I think is good, no?
> > > 
> > 
> > But adding IMX namespace is still worth of the LOC changes?
> 
> Well, the static initializers still need something... the alternative is
> to initialize them at runtime which probably wouldn't be so nice.
> 
Let's leave static initializers with IMX_GPIO_TO_IRQ() for now, since
all of them will get killed by device tree support anyway?  With DT
support, the gpio number should be encoded in DT and needs to be
retrieved from DT at runtime, and gpio_to_irq() has to be used for
acquiring irq number then.

Patch

diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index ede2710..2ecb62d 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -527,7 +527,8 @@  static void __init armadillo5x0_init(void)
 	/* Get RTC IRQ and register the chip */
 	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
 		if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
-			armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
+			armadillo5x0_i2c_rtc.irq =
+				IMX_GPIO_TO_IRQ(ARMADILLO5X0_RTC_GPIO);
 		else
 			gpio_free(ARMADILLO5X0_RTC_GPIO);
 	}
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index f39a478b..13b7041 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -66,7 +66,7 @@  static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 		I2C_BOARD_INFO("tsc2007", 0x48),
 		.type		= "tsc2007",
 		.platform_data	= &tsc2007_info,
-		.irq		= gpio_to_irq(TSC2007_IRQGPIO),
+		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
 	},
 };
 
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 6fa6934..7f3833e 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -46,7 +46,7 @@ 
 #define SD1_EN_GPIO		IMX_GPIO_NR(2, 25)
 #define OTG_PHY_RESET_GPIO	IMX_GPIO_NR(2, 23)
 #define SPI2_SS0		IMX_GPIO_NR(4, 21)
-#define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(3, 28))
+#define EXPIO_PARENT_INT	IMX_GPIO_TO_IRQ(IMX_GPIO_NR(3, 28))
 #define PMIC_INT		IMX_GPIO_NR(3, 14)
 #define SPI1_SS0		IMX_GPIO_NR(4, 28)
 #define SD1_CD			IMX_GPIO_NR(2, 26)
@@ -171,13 +171,13 @@  static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = {
 static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
 				void *data)
 {
-	return request_irq(gpio_to_irq(SD1_CD), detect_irq,
+	return request_irq(IMX_GPIO_TO_IRQ(SD1_CD), detect_irq,
 	IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
 }
 
 static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
 {
-	free_irq(gpio_to_irq(SD1_CD), data);
+	free_irq(IMX_GPIO_TO_IRQ(SD1_CD), data);
 }
 
 static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
@@ -359,7 +359,7 @@  static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
 		.bus_num	= 1,
 		.chip_select	= 0, /* SS0 */
 		.platform_data	= &mc13783_pdata,
-		.irq = gpio_to_irq(PMIC_INT),
+		.irq = IMX_GPIO_TO_IRQ(PMIC_INT),
 		.mode = SPI_CS_HIGH,
 	}, {
 		.modalias	= "l4f00242t03",
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index b358383..649a937 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -319,7 +319,7 @@  static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
 		goto err_gpio_free;
 	gpio_direction_input(SDHC1_WP);
 
-	ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
+	ret = request_irq(IMX_GPIO_TO_IRQ(SDHC1_CD), detect_irq,
 		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 		"sdhc1-card-detect", data);
 	if (ret)
@@ -337,7 +337,7 @@  err_gpio_free:
 
 static void moboard_sdhc1_exit(struct device *dev, void *data)
 {
-	free_irq(gpio_to_irq(SDHC1_CD), data);
+	free_irq(IMX_GPIO_TO_IRQ(SDHC1_CD), data);
 	gpio_free(SDHC1_WP);
 	gpio_free(SDHC1_CD);
 }
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index b3b9bd8..bc68eba 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -43,7 +43,7 @@ 
 
 #include "devices-imx35.h"
 
-#define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(1, 1))
+#define EXPIO_PARENT_INT	IMX_GPIO_TO_IRQ(IMX_GPIO_NR(1, 1))
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 7d8e012..5250283 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -162,7 +162,7 @@  static struct i2c_board_info vpr200_i2c_devices[] = {
 	}, {
 		I2C_BOARD_INFO("mc13892", 0x08),
 		.platform_data = &vpr200_pmic,
-		.irq = gpio_to_irq(GPIO_PMIC_INT),
+		.irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
 	}
 };
 
diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c
index 0aa2536..6dfb602 100644
--- a/arch/arm/mach-imx/mx31moboard-devboard.c
+++ b/arch/arm/mach-imx/mx31moboard-devboard.c
@@ -77,7 +77,7 @@  static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
 		goto err_gpio_free;
 	gpio_direction_input(SDHC2_WP);
 
-	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+	ret = request_irq(IMX_GPIO_TO_IRQ(SDHC2_CD), detect_irq,
 		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 		"sdhc2-card-detect", data);
 	if (ret)
@@ -95,7 +95,7 @@  err_gpio_free:
 
 static void devboard_sdhc2_exit(struct device *dev, void *data)
 {
-	free_irq(gpio_to_irq(SDHC2_CD), data);
+	free_irq(IMX_GPIO_TO_IRQ(SDHC2_CD), data);
 	gpio_free(SDHC2_WP);
 	gpio_free(SDHC2_CD);
 }
diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c
index bb639cb..8f8664f 100644
--- a/arch/arm/mach-imx/mx31moboard-marxbot.c
+++ b/arch/arm/mach-imx/mx31moboard-marxbot.c
@@ -89,7 +89,7 @@  static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
 		goto err_gpio_free;
 	gpio_direction_input(SDHC2_WP);
 
-	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+	ret = request_irq(IMX_GPIO_TO_IRQ(SDHC2_CD), detect_irq,
 		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 		"sdhc2-card-detect", data);
 	if (ret)
@@ -107,7 +107,7 @@  err_gpio_free:
 
 static void marxbot_sdhc2_exit(struct device *dev, void *data)
 {
-	free_irq(gpio_to_irq(SDHC2_CD), data);
+	free_irq(IMX_GPIO_TO_IRQ(SDHC2_CD), data);
 	gpio_free(SDHC2_WP);
 	gpio_free(SDHC2_CD);
 }
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 68934ea..49ec98e 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -57,7 +57,7 @@ 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTA_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -65,7 +65,7 @@  static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTB_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -73,7 +73,7 @@  static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTC_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -81,7 +81,7 @@  static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index ff096d5..8badbdb 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -129,7 +129,7 @@  static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
 		I2C_BOARD_INFO("tsc2007", 0x49),
 		.type		= "tsc2007",
 		.platform_data	= &tsc2007_info,
-		.irq		= gpio_to_irq(TSC2007_IRQGPIO),
+		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
 	},
 };
 
@@ -245,7 +245,7 @@  static struct spi_board_info cpuimx51sd_spi_device[] = {
 		.mode		= SPI_MODE_0,
 		.chip_select     = 0,
 		.platform_data   = &mcp251x_info,
-		.irq             = gpio_to_irq(CAN_IRQGPIO)
+		.irq             = IMX_GPIO_TO_IRQ(CAN_IRQGPIO)
 	},
 };
 
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 07a3815..2cb2a4b 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -27,7 +27,7 @@ 
 #include "devices-imx51.h"
 #include "devices.h"
 
-#define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(1, 6))
+#define EXPIO_PARENT_INT	IMX_GPIO_TO_IRQ(IMX_GPIO_NR(1, 6))
 #define MX51_3DS_ECSPI2_CS	(GPIO_PORTC + 28)
 
 static iomux_v3_cfg_t mx51_3ds_pads[] = {
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 76a67c4..ddc3015 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -134,8 +134,8 @@  static struct resource ard_smsc911x_resources[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	{
-		.start =  gpio_to_irq(ARD_ETHERNET_INT_B),
-		.end =  gpio_to_irq(ARD_ETHERNET_INT_B),
+		.start =  IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
+		.end =  IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
 		.flags = IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index bbf4564..19675bb 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -160,7 +160,7 @@  struct tsc2007_platform_data tsc2007_data = {
 static struct i2c_board_info mbimx51_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("tsc2007", 0x49),
-		.irq  = gpio_to_irq(MBIMX51_TSC2007_GPIO),
+		.irq  = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO),
 		.platform_data = &tsc2007_data,
 	}, {
 		I2C_BOARD_INFO("tlv320aic23", 0x1a),
@@ -197,7 +197,7 @@  void __init eukrea_mbimx51_baseboard_init(void)
 
 	gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
 	gpio_direction_input(MBIMX51_TSC2007_GPIO);
-	irq_set_irq_type(gpio_to_irq(MBIMX51_TSC2007_GPIO),
+	irq_set_irq_type(IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO),
 					IRQF_TRIGGER_FALLING);
 	i2c_register_board_info(1, mbimx51_i2c_devices,
 				ARRAY_SIZE(mbimx51_i2c_devices));
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 4435e03..2a3015a 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -589,7 +589,7 @@  static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
 		.bus_num = 0,
 		.chip_select = 0,
 		.platform_data = &mx51_efika_mc13892_data,
-		.irq = gpio_to_irq(EFIKAMX_PMIC),
+		.irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC),
 	},
 };
 
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index a8bfd56..77f6556 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -116,4 +116,6 @@ 
 	.type = _type,							\
 }
 
+#define IMX_GPIO_TO_IRQ(gpio)	(MXC_GPIO_IRQ_START + (gpio))
+
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */