@@ -3424,7 +3424,7 @@ IOC3 ETHERNET DRIVER
M: Ralf Baechle <ralf@linux-mips.org>
L: linux-mips@linux-mips.org
S: Maintained
-F: drivers/net/ioc3-eth.c
+F: drivers/net/ethernet/sgi/ioc3-eth.c
IOC3 SERIAL DRIVER
M: Pat Gefre <pfg@sgi.com>
@@ -244,16 +244,6 @@ config KORINA
If you have a Mikrotik RouterBoard 500 or IDT RC32434
based system say Y. Otherwise say N.
-config SGI_IOC3_ETH
- bool "SGI IOC3 Ethernet"
- depends on PCI && SGI_IP27
- select CRC32
- select MII
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
config MIPS_SIM_NET
tristate "MIPS simulator Network device"
depends on MIPS_SIM
@@ -262,10 +252,6 @@ config MIPS_SIM_NET
emulated by the MIPS Simulator.
If you are not using a MIPSsim or are unsure, say N.
-config SGI_O2MACE_ETH
- tristate "SGI O2 MACE Fast Ethernet support"
- depends on SGI_IP32=y
-
config SH_ETH
tristate "Renesas SuperH Ethernet support"
depends on SUPERH && \
@@ -103,7 +103,6 @@ obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
-obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
obj-$(CONFIG_AT1700) += at1700.o
obj-$(CONFIG_CPMAC) += cpmac.o
@@ -111,7 +110,6 @@ obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
-obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
obj-$(CONFIG_TUN) += tun.o
obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
@@ -37,6 +37,7 @@ source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/sfc/Kconfig"
+source "drivers/net/ethernet/sgi/Kconfig"
source "drivers/net/ethernet/smsc/Kconfig"
source "drivers/net/ethernet/stmicro/Kconfig"
source "drivers/net/ethernet/sun/Kconfig"
@@ -28,6 +28,7 @@ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
obj-$(CONFIG_SFC) += sfc/
+obj-$(CONFIG_NET_VENDOR_SGI) += sgi/
obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
obj-$(CONFIG_NET_VENDOR_SUN) += sun/
new file mode 100644
@@ -0,0 +1,34 @@
+#
+# SGI device configuration
+#
+
+config NET_VENDOR_SGI
+ bool "SGI devices"
+ depends on (PCI && SGI_IP27) || SGI_IP32
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about SGI devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_SGI
+
+config SGI_IOC3_ETH
+ bool "SGI IOC3 Ethernet"
+ depends on PCI && SGI_IP27
+ select CRC32
+ select MII
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+config SGI_O2MACE_ETH
+ tristate "SGI O2 MACE Fast Ethernet support"
+ depends on SGI_IP32=y
+
+endif # NET_VENDOR_SGI
new file mode 100644
@@ -0,0 +1,6 @@
+#
+# Makefile for the SGI device drivers.
+#
+
+obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
+obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
Move the SGI drivers into drivers/net/ethernet/sgi/ and make the necessary Kconfig and Makefile changes. CC: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> --- MAINTAINERS | 2 +- drivers/net/Kconfig | 14 ------------ drivers/net/Makefile | 2 - drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/sgi/Kconfig | 34 +++++++++++++++++++++++++++++ drivers/net/ethernet/sgi/Makefile | 6 +++++ drivers/net/{ => ethernet/sgi}/ioc3-eth.c | 0 drivers/net/{ => ethernet/sgi}/meth.c | 0 drivers/net/{ => ethernet/sgi}/meth.h | 0 10 files changed, 43 insertions(+), 17 deletions(-) create mode 100644 drivers/net/ethernet/sgi/Kconfig create mode 100644 drivers/net/ethernet/sgi/Makefile rename drivers/net/{ => ethernet/sgi}/ioc3-eth.c (100%) rename drivers/net/{ => ethernet/sgi}/meth.c (100%) rename drivers/net/{ => ethernet/sgi}/meth.h (100%) diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c similarity index 100% rename from drivers/net/ioc3-eth.c rename to drivers/net/ethernet/sgi/ioc3-eth.c diff --git a/drivers/net/meth.c b/drivers/net/ethernet/sgi/meth.c similarity index 100% rename from drivers/net/meth.c rename to drivers/net/ethernet/sgi/meth.c diff --git a/drivers/net/meth.h b/drivers/net/ethernet/sgi/meth.h similarity index 100% rename from drivers/net/meth.h rename to drivers/net/ethernet/sgi/meth.h