@@ -623,26 +623,6 @@ config SIS900
To compile this driver as a module, choose M here: the module
will be called sis900. This is recommended.
-config SUNDANCE
- tristate "Sundance Alta support"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- help
- This driver is for the Sundance "Alta" chip.
- More specific information and updates are available from
- <http://www.scyld.com/network/sundance.html>.
-
-config SUNDANCE_MMIO
- bool "Use MMIO instead of PIO"
- depends on SUNDANCE
- help
- Enable memory-mapped I/O for interaction with Sundance NIC registers.
- Do NOT enable this by default, PIO (enabled when MMIO is disabled)
- is known to solve bugs on certain chips.
-
- If unsure, say N.
-
config TLAN
tristate "TI ThunderLAN support"
depends on NET_PCI && (PCI || EISA)
@@ -740,36 +720,6 @@ config NET_POCKET
the questions about this class of network devices. If you say Y, you
will be asked for your specific device in the following questions.
-config DE600
- tristate "D-Link DE600 pocket adapter support"
- depends on NET_POCKET && PARPORT
- ---help---
- This is a network (Ethernet) device which attaches to your parallel
- port. Read <file:Documentation/networking/DLINK.txt> as well as the
- Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, if you want to use
- this. It is possible to have several devices share a single parallel
- port and it is safe to compile the corresponding drivers into the
- kernel.
-
- To compile this driver as a module, choose M here: the module
- will be called de600.
-
-config DE620
- tristate "D-Link DE620 pocket adapter support"
- depends on NET_POCKET && PARPORT
- ---help---
- This is a network (Ethernet) device which attaches to your parallel
- port. Read <file:Documentation/networking/DLINK.txt> as well as the
- Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, if you want to use
- this. It is possible to have several devices share a single parallel
- port and it is safe to compile the corresponding drivers into the
- kernel.
-
- To compile this driver as a module, choose M here: the module
- will be called de620.
-
config SGISEEQ
tristate "SGI Seeq ethernet controller support"
depends on SGI_HAS_SEEQ
@@ -862,20 +812,6 @@ menuconfig NETDEV_1000
if NETDEV_1000
-config DL2K
- tristate "DL2000/TC902x-based Gigabit Ethernet support"
- depends on PCI
- select CRC32
- help
- This driver supports DL2000/TC902x-based Gigabit ethernet cards,
- which includes
- D-Link DGE-550T Gigabit Ethernet Adapter.
- D-Link DL2000-based Gigabit Ethernet Adapter.
- Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
-
- To compile this driver as a module, choose M here: the
- module will be called dl2k.
-
config IP1000
tristate "IP1000 Gigabit Ethernet support"
depends on PCI && EXPERIMENTAL
@@ -67,7 +67,6 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o
# end link order section
#
-obj-$(CONFIG_SUNDANCE) += sundance.o
obj-$(CONFIG_HAMACHI) += hamachi.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_SEEQ8005) += seeq8005.o
@@ -106,8 +105,6 @@ obj-$(CONFIG_DUMMY) += dummy.o
obj-$(CONFIG_IFB) += ifb.o
obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
-obj-$(CONFIG_DE600) += de600.o
-obj-$(CONFIG_DE620) += de620.o
obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
@@ -123,7 +120,6 @@ obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
obj-$(CONFIG_TUN) += tun.o
obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_DL2K) += dl2k.o
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
@@ -18,6 +18,7 @@ source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
source "drivers/net/ethernet/cisco/Kconfig"
+source "drivers/net/ethernet/dlink/Kconfig"
source "drivers/net/ethernet/emulex/Kconfig"
source "drivers/net/ethernet/neterion/Kconfig"
source "drivers/net/ethernet/faraday/Kconfig"
@@ -10,6 +10,7 @@ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
+obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
new file mode 100644
@@ -0,0 +1,84 @@
+#
+# D-Link device configuration
+#
+
+config NET_VENDOR_DLINK
+ bool "D-Link devices"
+ depends on PCI || PARPORT
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about D-Link devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_DLINK
+
+config DE600
+ tristate "D-Link DE600 pocket adapter support"
+ depends on PARPORT
+ ---help---
+ This is a network (Ethernet) device which attaches to your parallel
+ port. Read <file:Documentation/networking/DLINK.txt> as well as the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, if you want to use
+ this. It is possible to have several devices share a single parallel
+ port and it is safe to compile the corresponding drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the module
+ will be called de600.
+
+config DE620
+ tristate "D-Link DE620 pocket adapter support"
+ depends on PARPORT
+ ---help---
+ This is a network (Ethernet) device which attaches to your parallel
+ port. Read <file:Documentation/networking/DLINK.txt> as well as the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, if you want to use
+ this. It is possible to have several devices share a single parallel
+ port and it is safe to compile the corresponding drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the module
+ will be called de620.
+
+config DL2K
+ tristate "DL2000/TC902x-based Gigabit Ethernet support"
+ depends on PCI
+ select CRC32
+ ---help---
+ This driver supports DL2000/TC902x-based Gigabit ethernet cards,
+ which includes
+ D-Link DGE-550T Gigabit Ethernet Adapter.
+ D-Link DL2000-based Gigabit Ethernet Adapter.
+ Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dl2k.
+
+config SUNDANCE
+ tristate "Sundance Alta support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ This driver is for the Sundance "Alta" chip.
+ More specific information and updates are available from
+ <http://www.scyld.com/network/sundance.html>.
+
+config SUNDANCE_MMIO
+ bool "Use MMIO instead of PIO"
+ depends on SUNDANCE
+ ---help---
+ Enable memory-mapped I/O for interaction with Sundance NIC registers.
+ Do NOT enable this by default, PIO (enabled when MMIO is disabled)
+ is known to solve bugs on certain chips.
+
+ If unsure, say N.
+
+endif # NET_VENDOR_DLINK
new file mode 100644
@@ -0,0 +1,8 @@
+#
+# Makefile for the D-Link network device drivers.
+#
+
+obj-$(CONFIG_DE600) += de600.o
+obj-$(CONFIG_DE620) += de620.o
+obj-$(CONFIG_DL2K) += dl2k.o
+obj-$(CONFIG_SUNDANCE) += sundance.o
Move the D-Link drivers into drivers/net/ethernet/dlink/ and make the necessary Kconfig and Makefile changes. CC: Bjorn Ekwall <bj0rn@blox.se> CC: Donald Becker <becker@scyld.com> CC: Edward Peng <edward_peng@dlink.com.tw> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> --- drivers/net/Kconfig | 64 -------------------- drivers/net/Makefile | 4 - drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/dlink/Kconfig | 84 +++++++++++++++++++++++++++ drivers/net/ethernet/dlink/Makefile | 8 +++ drivers/net/{ => ethernet/dlink}/de600.c | 0 drivers/net/{ => ethernet/dlink}/de600.h | 0 drivers/net/{ => ethernet/dlink}/de620.c | 0 drivers/net/{ => ethernet/dlink}/de620.h | 0 drivers/net/{ => ethernet/dlink}/dl2k.c | 0 drivers/net/{ => ethernet/dlink}/dl2k.h | 0 drivers/net/{ => ethernet/dlink}/sundance.c | 0 13 files changed, 94 insertions(+), 68 deletions(-) create mode 100644 drivers/net/ethernet/dlink/Kconfig create mode 100644 drivers/net/ethernet/dlink/Makefile rename drivers/net/{ => ethernet/dlink}/de600.c (100%) rename drivers/net/{ => ethernet/dlink}/de600.h (100%) rename drivers/net/{ => ethernet/dlink}/de620.c (100%) rename drivers/net/{ => ethernet/dlink}/de620.h (100%) rename drivers/net/{ => ethernet/dlink}/dl2k.c (100%) rename drivers/net/{ => ethernet/dlink}/dl2k.h (100%) rename drivers/net/{ => ethernet/dlink}/sundance.c (100%) diff --git a/drivers/net/de600.c b/drivers/net/ethernet/dlink/de600.c similarity index 100% rename from drivers/net/de600.c rename to drivers/net/ethernet/dlink/de600.c diff --git a/drivers/net/de600.h b/drivers/net/ethernet/dlink/de600.h similarity index 100% rename from drivers/net/de600.h rename to drivers/net/ethernet/dlink/de600.h diff --git a/drivers/net/de620.c b/drivers/net/ethernet/dlink/de620.c similarity index 100% rename from drivers/net/de620.c rename to drivers/net/ethernet/dlink/de620.c diff --git a/drivers/net/de620.h b/drivers/net/ethernet/dlink/de620.h similarity index 100% rename from drivers/net/de620.h rename to drivers/net/ethernet/dlink/de620.h diff --git a/drivers/net/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c similarity index 100% rename from drivers/net/dl2k.c rename to drivers/net/ethernet/dlink/dl2k.c diff --git a/drivers/net/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h similarity index 100% rename from drivers/net/dl2k.h rename to drivers/net/ethernet/dlink/dl2k.h diff --git a/drivers/net/sundance.c b/drivers/net/ethernet/dlink/sundance.c similarity index 100% rename from drivers/net/sundance.c rename to drivers/net/ethernet/dlink/sundance.c