[02/10] dt-bindings: rcar-gen3-phy-usb2: Document uses_usb_x1
diff mbox series

Message ID 20190506234631.113226-3-chris.brandt@renesas.com
State Changes Requested
Headers show
Series
  • usb: Add host and device support for RZ/A2
Related show

Checks

Context Check Description
robh/checkpatch success

Commit Message

Chris Brandt May 6, 2019, 11:46 p.m. UTC
Document the optional renesas,uses_usb_x1 property.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
---
 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 ++
 1 file changed, 2 insertions(+)

Comments

Rob Herring May 7, 2019, 1:05 a.m. UTC | #1
On Mon, May 6, 2019 at 6:47 PM Chris Brandt <chris.brandt@renesas.com> wrote:
>
> Document the optional renesas,uses_usb_x1 property.
>
> Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
> ---
>  Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> index d46188f450bf..26bf377102d3 100644
> --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> @@ -46,6 +46,8 @@ channel as USB OTG:
>                regulator will be managed during the PHY power on/off sequence.
>  - renesas,no-otg-pins: boolean, specify when a board does not provide proper
>                        otg pins.
> +- renesas,use_usb_x1: boolean, the dedicated 48MHz crystal inputs USB_X1 are
> +                      used for the PLL source

s/_/-/
Chris Brandt May 7, 2019, 1:17 a.m. UTC | #2
On Mon, May 06, 2019, Rob Herring wrote:
> > +- renesas,use_usb_x1: boolean, the dedicated 48MHz crystal inputs
> USB_X1 are
> > +                      used for the PLL source
> 
> s/_/-/

Good point.
Thanks.


Chris
Sergei Shtylyov May 7, 2019, 8:37 a.m. UTC | #3
Hello!

On 07.05.2019 2:46, Chris Brandt wrote:

> Document the optional renesas,uses_usb_x1 property.
> 
> Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
> ---
>   Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> index d46188f450bf..26bf377102d3 100644
> --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> @@ -46,6 +46,8 @@ channel as USB OTG:
>   	       regulator will be managed during the PHY power on/off sequence.
>   - renesas,no-otg-pins: boolean, specify when a board does not provide proper
>   		       otg pins.
> +- renesas,use_usb_x1: boolean, the dedicated 48MHz crystal inputs USB_X1 are

    Hyphens are preferred to underscores in the DT property names.

> +                      used for the PLL source
>   
>   Example (R-Car H3):

MBR, Sergei

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index d46188f450bf..26bf377102d3 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -46,6 +46,8 @@  channel as USB OTG:
 	       regulator will be managed during the PHY power on/off sequence.
 - renesas,no-otg-pins: boolean, specify when a board does not provide proper
 		       otg pins.
+- renesas,use_usb_x1: boolean, the dedicated 48MHz crystal inputs USB_X1 are
+                      used for the PLL source
 
 Example (R-Car H3):