[v4,1/6] dt-bindings: mfd: max77620: Add compatible for Maxim 77663
diff mbox series

Message ID 20190505154325.30026-2-digetx@gmail.com
State New
Headers show
Series
  • Add support for Maxim 77663 MFD
Related show

Commit Message

Dmitry Osipenko May 5, 2019, 3:43 p.m. UTC
Maxim 77663 has a few minor differences in regards to hardware interface
and available capabilities by comparing it with 77620 and 20024 models,
hence re-use 77620 device-tree binding for the 77663.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 Documentation/devicetree/bindings/mfd/max77620.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Lee Jones May 8, 2019, 11:46 a.m. UTC | #1
On Sun, 05 May 2019, Dmitry Osipenko wrote:

> Maxim 77663 has a few minor differences in regards to hardware interface
> and available capabilities by comparing it with 77620 and 20024 models,
> hence re-use 77620 device-tree binding for the 77663.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt
index 9c16d51cc15b..b75283787ba1 100644
--- a/Documentation/devicetree/bindings/mfd/max77620.txt
+++ b/Documentation/devicetree/bindings/mfd/max77620.txt
@@ -4,7 +4,8 @@  Required properties:
 -------------------
 - compatible: Must be one of
 		"maxim,max77620"
-		"maxim,max20024".
+		"maxim,max20024"
+		"maxim,max77663"
 - reg: I2C device address.
 
 Optional properties:
@@ -105,6 +106,7 @@  Optional properties:
 Here supported time periods by device in microseconds are as follows:
 MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds.
 MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.
+MAX77663 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.
 
 -maxim,power-ok-control: configure map power ok bit
 			1: Enables POK(Power OK) to control nRST_IO and GPIO1