[mlx5-next,v2,07/17] IB/mlx5: Support set qp counter

From: Mark Zhang <markz@mellanox.com>

Support bind a qp with counter. If counter is null then bind the qp to
the default counter. Different QP state has different operation:
- RESET: Set the counter field so that it will take effective
  during RST2INIT change;
- RTS: Issue an RTS2RTS change to update the QP counter;
- Other: Set the counter field and mark the counter_pending flag,
  when QP is moved to RTS state and this flag is set, then issue
  an RTS2RTS modification to update the counter.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
 drivers/infiniband/hw/mlx5/mlx5_ib.h |  6 +++
 drivers/infiniband/hw/mlx5/qp.c      | 76 +++++++++++++++++++++++++++-
 include/linux/mlx5/qp.h              |  1 +
 3 files changed, 81 insertions(+), 2 deletions(-)

On Mon, 2019-04-29 at 11:34 +0300, Leon Romanovsky wrote:
> From: Mark Zhang <markz@mellanox.com>
> 
> Support bind a qp with counter. If counter is null then bind the qp
> to
> the default counter. Different QP state has different operation:
> - RESET: Set the counter field so that it will take effective
>   during RST2INIT change;
> - RTS: Issue an RTS2RTS change to update the QP counter;
> - Other: Set the counter field and mark the counter_pending flag,
>   when QP is moved to RTS state and this flag is set, then issue
>   an RTS2RTS modification to update the counter.
> 
> Signed-off-by: Mark Zhang <markz@mellanox.com>
> Reviewed-by: Majd Dibbiny <majd@mellanox.com>
> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
> ---
>  drivers/infiniband/hw/mlx5/mlx5_ib.h |  6 +++
>  drivers/infiniband/hw/mlx5/qp.c      | 76
> +++++++++++++++++++++++++++-
>  include/linux/mlx5/qp.h              |  1 +

I don't see any reason why this patch should go to mlx5-next branch.
Just because you have one liner in include/linux/mlx5/qp.h, is not
enough reason.

>  3 files changed, 81 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h
> b/drivers/infiniband/hw/mlx5/mlx5_ib.h
> index 55b8bdb402b6..447f8ad5abbd 100644
> --- a/drivers/infiniband/hw/mlx5/mlx5_ib.h
> +++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h
> @@ -437,6 +437,10 @@ struct mlx5_ib_qp {
>  	u32			flags_en;
>  	/* storage for qp sub type when core qp type is IB_QPT_DRIVER
> */
>  	enum ib_qp_type		qp_sub_type;
> +	/* A flag to indicate if there's a new counter is configured
> +	 * but not take effective
> +	 */
> +	u32                     counter_pending;
>  };
>  
>  struct mlx5_ib_cq_buf {
> @@ -1418,4 +1422,6 @@ void mlx5_ib_put_xlt_emergency_page(void);
>  int bfregn_to_uar_index(struct mlx5_ib_dev *dev,
>  			struct mlx5_bfreg_info *bfregi, u32 bfregn,
>  			bool dyn_bfreg);
> +
> +int mlx5_ib_qp_set_counter(struct ib_qp *qp, struct rdma_counter
> *counter);
>  #endif /* MLX5_IB_H */
> diff --git a/drivers/infiniband/hw/mlx5/qp.c
> b/drivers/infiniband/hw/mlx5/qp.c
> index efe1f6f0c351..29e3fcd66510 100644
> --- a/drivers/infiniband/hw/mlx5/qp.c
> +++ b/drivers/infiniband/hw/mlx5/qp.c
> @@ -34,6 +34,7 @@
>  #include <rdma/ib_umem.h>
>  #include <rdma/ib_cache.h>
>  #include <rdma/ib_user_verbs.h>
> +#include <rdma/rdma_counter.h>
>  #include <linux/mlx5/fs.h>
>  #include "mlx5_ib.h"
>  #include "ib_rep.h"
> @@ -3365,6 +3366,35 @@ static unsigned int get_tx_affinity(struct
> mlx5_ib_dev *dev,
>  	return tx_port_affinity;
>  }
>  
> +static int __mlx5_ib_qp_set_counter(struct ib_qp *qp,
> +				    struct rdma_counter *counter)
> +{
> +	struct mlx5_ib_dev *dev = to_mdev(qp->device);
> +	struct mlx5_ib_qp *mqp = to_mqp(qp);
> +	struct mlx5_qp_context context = {};
> +	struct mlx5_ib_port *mibport = NULL;
> +	struct mlx5_ib_qp_base *base;
> +	u32 set_id;
> +
> +	if (!MLX5_CAP_GEN(dev->mdev, rts2rts_qp_counters_set_id))
> +		return 0;
> +
> +	if (counter) {
> +		set_id = counter->id;
> +	} else {
> +		mibport = &dev->port[mqp->port - 1];
> +		set_id = mibport->cnts.set_id;
> +	}
> +
> +	base = &mqp->trans_qp.base;
> +	context.qp_counter_set_usr_page &= cpu_to_be32(0xffffff);
> +	context.qp_counter_set_usr_page |= cpu_to_be32(set_id << 24);
> +	return mlx5_core_qp_modify(dev->mdev,
> +				   MLX5_CMD_OP_RTS2RTS_QP,
> +				   MLX5_QP_OPTPAR_COUNTER_SET_ID,
> +				   &context, &base->mqp);
> +}
> +
>  static int __mlx5_ib_modify_qp(struct ib_qp *ibqp,
>  			       const struct ib_qp_attr *attr, int
> attr_mask,
>  			       enum ib_qp_state cur_state,
> @@ -3418,6 +3448,7 @@ static int __mlx5_ib_modify_qp(struct ib_qp
> *ibqp,
>  	struct mlx5_ib_port *mibport = NULL;
>  	enum mlx5_qp_state mlx5_cur, mlx5_new;
>  	enum mlx5_qp_optpar optpar;
> +	u32 set_id = 0;
>  	int mlx5_st;
>  	int err;
>  	u16 op;
> @@ -3580,8 +3611,12 @@ static int __mlx5_ib_modify_qp(struct ib_qp
> *ibqp,
>  			port_num = 0;
>  
>  		mibport = &dev->port[port_num];
> +		if (ibqp->counter)
> +			set_id = ibqp->counter->id;
> +		else
> +			set_id = mibport->cnts.set_id;
>  		context->qp_counter_set_usr_page |=
> -			cpu_to_be32((u32)(mibport->cnts.set_id) << 24);
> +			cpu_to_be32(set_id << 24);
>  	}
>  
>  	if (!ibqp->uobject && cur_state == IB_QPS_RESET && new_state ==
> IB_QPS_INIT)
> @@ -3609,7 +3644,7 @@ static int __mlx5_ib_modify_qp(struct ib_qp
> *ibqp,
>  
>  		raw_qp_param.operation = op;
>  		if (cur_state == IB_QPS_RESET && new_state ==
> IB_QPS_INIT) {
> -			raw_qp_param.rq_q_ctr_id = mibport-
> >cnts.set_id;
> +			raw_qp_param.rq_q_ctr_id = set_id;
>  			raw_qp_param.set_mask |=
> MLX5_RAW_QP_MOD_SET_RQ_Q_CTR_ID;
>  		}
>  
> @@ -3686,6 +3721,12 @@ static int __mlx5_ib_modify_qp(struct ib_qp
> *ibqp,
>  		qp->db.db[MLX5_SND_DBR] = 0;
>  	}
>  
> +	if ((new_state == IB_QPS_RTS) && qp->counter_pending) {
> +		err = __mlx5_ib_qp_set_counter(ibqp, ibqp->counter);
> +		if (!err)
> +			qp->counter_pending = 0;
> +	}
> +
>  out:
>  	kfree(context);
>  	return err;
> @@ -6347,3 +6388,34 @@ void mlx5_ib_drain_rq(struct ib_qp *qp)
>  
>  	handle_drain_completion(cq, &rdrain, dev);
>  }
> +
> +/**
> + * Bind a qp to a counter. If @counter is NULL then bind the qp to
> + * the default counter
> + */
> +int mlx5_ib_qp_set_counter(struct ib_qp *qp, struct rdma_counter
> *counter)
> +{
> +	struct mlx5_ib_qp *mqp = to_mqp(qp);
> +	int err = 0;
> +
> +	mutex_lock(&mqp->mutex);
> +	if (mqp->state == IB_QPS_RESET) {
> +		qp->counter = counter;
> +		goto out;
> +	}
> +
> +	if (mqp->state == IB_QPS_RTS) {
> +		err = __mlx5_ib_qp_set_counter(qp, counter);
> +		if (!err)
> +			qp->counter = counter;
> +
> +		goto out;
> +	}
> +
> +	mqp->counter_pending = 1;
> +	qp->counter = counter;
> +
> +out:
> +	mutex_unlock(&mqp->mutex);
> +	return err;
> +}
> diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h
> index 0343c81d4c5f..b0b47106bc76 100644
> --- a/include/linux/mlx5/qp.h
> +++ b/include/linux/mlx5/qp.h
> @@ -70,6 +70,7 @@ enum mlx5_qp_optpar {
>  	MLX5_QP_OPTPAR_CQN_RCV			= 1 << 19,
>  	MLX5_QP_OPTPAR_DC_HS			= 1 << 20,
>  	MLX5_QP_OPTPAR_DC_KEY			= 1 << 21,
> +	MLX5_QP_OPTPAR_COUNTER_SET_ID		= 1 << 25,
>  };
>  
>  enum mlx5_qp_state {

On Mon, Apr 29, 2019 at 06:22:03PM +0000, Saeed Mahameed wrote:
> On Mon, 2019-04-29 at 11:34 +0300, Leon Romanovsky wrote:
> > From: Mark Zhang <markz@mellanox.com>
> >
> > Support bind a qp with counter. If counter is null then bind the qp
> > to
> > the default counter. Different QP state has different operation:
> > - RESET: Set the counter field so that it will take effective
> >   during RST2INIT change;
> > - RTS: Issue an RTS2RTS change to update the QP counter;
> > - Other: Set the counter field and mark the counter_pending flag,
> >   when QP is moved to RTS state and this flag is set, then issue
> >   an RTS2RTS modification to update the counter.
> >
> > Signed-off-by: Mark Zhang <markz@mellanox.com>
> > Reviewed-by: Majd Dibbiny <majd@mellanox.com>
> > Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
> > ---
> >  drivers/infiniband/hw/mlx5/mlx5_ib.h |  6 +++
> >  drivers/infiniband/hw/mlx5/qp.c      | 76
> > +++++++++++++++++++++++++++-
> >  include/linux/mlx5/qp.h              |  1 +
>
> I don't see any reason why this patch should go to mlx5-next branch.
> Just because you have one liner in include/linux/mlx5/qp.h, is not
> enough reason.
>

I'm changing target automatically based on get_maintainer.pl output.

If "$GET_MAINTAINER --email --nol --nos --nosubsystem --noroles $_file | grep Saeed -c"
returns Saeed, it means that such patch has all potential to create merge conflict.

Thanks