diff mbox series

[v2,6/9] dpaa_eth: base dma mappings on the fman rx port

Message ID 20190427071031.6563-7-laurentiu.tudor@nxp.com
State Changes Requested
Delegated to: David Miller
Headers show
Series Prerequisites for NXP LS104xA SMMU enablement | expand

Commit Message

Laurentiu Tudor April 27, 2019, 7:10 a.m. UTC 
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

The dma transactions initiator is the rx fman port so that's the device
that the dma mappings should be done. Previously the mappings were done
through the MAC device which makes no sense because it's neither dma-able
nor connected in any way to smmu.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 647e90e7434f..cdc7e6d83f77 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2805,8 +2805,15 @@  static int dpaa_eth_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	mac_dev = dpaa_mac_dev_get(pdev);
+	if (IS_ERR(mac_dev)) {
+		dev_err(&pdev->dev, "dpaa_mac_dev_get() failed\n");
+		err = PTR_ERR(mac_dev);
+		goto probe_err;
+	}
+
 	/* device used for DMA mapping */
-	dev = pdev->dev.parent;
+	dev = fman_port_get_device(mac_dev->port[RX]);
 	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40));
 	if (err) {
 		dev_err(dev, "dma_coerce_mask_and_coherent() failed\n");
@@ -2831,13 +2838,6 @@  static int dpaa_eth_probe(struct platform_device *pdev)
 
 	priv->msg_enable = netif_msg_init(debug, DPAA_MSG_DEFAULT);
 
-	mac_dev = dpaa_mac_dev_get(pdev);
-	if (IS_ERR(mac_dev)) {
-		dev_err(dev, "dpaa_mac_dev_get() failed\n");
-		err = PTR_ERR(mac_dev);
-		goto free_netdev;
-	}
-
 	/* If fsl_fm_max_frm is set to a higher value than the all-common 1500,
 	 * we choose conservatively and let the user explicitly set a higher
 	 * MTU via ifconfig. Otherwise, the user may end up with different MTUs
@@ -2973,9 +2973,9 @@  static int dpaa_eth_probe(struct platform_device *pdev)
 	qman_release_cgrid(priv->cgr_data.cgr.cgrid);
 free_dpaa_bps:
 	dpaa_bps_free(priv);
-free_netdev:
 	dev_set_drvdata(dev, NULL);
 	free_netdev(net_dev);
+probe_err:
 
 	return err;
 }