diff mbox series

[1/2] ARM: dts: aspeed: Add aspeed-p2a-ctrl node

Message ID 20190425194853.140617-1-venture@google.com
State Accepted, archived
Headers show
Series [1/2] ARM: dts: aspeed: Add aspeed-p2a-ctrl node | expand

Commit Message

Patrick Venture April 25, 2019, 7:48 p.m. UTC
Add a node for the aspeed-p2a-ctrl module.  This node, when enabled will
disable the PCI-to-AHB bridge and then allow control of this bridge via
ioctls, and access via mmap.

Signed-off-by: Patrick Venture <venture@google.com>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 4 ++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 5 +++++
 2 files changed, 9 insertions(+)

Comments

Joel Stanley April 29, 2019, 7:53 a.m. UTC | #1
On Thu, 25 Apr 2019 at 19:48, Patrick Venture <venture@google.com> wrote:
>
> Add a node for the aspeed-p2a-ctrl module.  This node, when enabled will
> disable the PCI-to-AHB bridge and then allow control of this bridge via
> ioctls, and access via mmap.
>
> Signed-off-by: Patrick Venture <venture@google.com>

Applied to the aspeed SoC tree.

Cheers,

Joel
Olof Johansson April 29, 2019, 5:05 p.m. UTC | #2
On Thu, Apr 25, 2019 at 12:48:53PM -0700, Patrick Venture wrote:
> Add a node for the aspeed-p2a-ctrl module.  This node, when enabled will
> disable the PCI-to-AHB bridge and then allow control of this bridge via
> ioctls, and access via mmap.
> 
> Signed-off-by: Patrick Venture <venture@google.com>

Patrick,

Please send these to Joel and Andrew (and cc the mailing lists). No need to
send patches that there are active maintainers for to arm@kernel.org directly.

(As a matter of fact, drivers/soc/aspeed should go through them too, even if
I applied the first patch directly just now).


-Olof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 9549f867aa1ef..0b7bc6072aed0 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -165,6 +165,10 @@ 
 					compatible = "aspeed,g4-pinctrl";
 				};
 
+				p2a: p2a-control {
+					compatible = "aspeed,ast2400-p2a-ctrl";
+					status = "disabled";
+				};
 			};
 
 			rng: hwrng@1e6e2078 {
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 3e4ed081505cc..5f01befcca1e2 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -212,6 +212,11 @@ 
 					aspeed,external-nodes = <&gfx &lhc>;
 
 				};
+
+				p2a: p2a-control {
+					compatible = "aspeed,ast2500-p2a-ctrl";
+					status = "disabled";
+				};
 			};
 
 			rng: hwrng@1e6e2078 {