mbox series

[GIT,PULL] Qualcomm ARM64 DT updates for 5.2

Message ID 1555997248-11513-2-git-send-email-agross@kernel.org
State New
Headers show
Series [GIT,PULL] Qualcomm ARM64 DT updates for 5.2 | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git tags/qcom-arm64-for-5.2

Message

Andy Gross April 23, 2019, 5:27 a.m. UTC
The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:

  Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git tags/qcom-arm64-for-5.2

for you to fetch changes up to 6ef7c11b31a57e43062da15a36fac54fcb97b533:

  arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes (2019-04-23 00:10:35 -0500)

----------------------------------------------------------------
Qualcomm ARM64 Updates for v5.2

* Add gpio ranges for Qualcomm platforms
* Fix MSM8998 BLSP2 I2C5 address
* Add MSM8998 UFS nodes and associated information
* Add SDM845 interconnect header and usage
* Add ADSP and CDSP PAS, RMTFS memory, and UFS phy reset on SDM845
* Update reserved memory map on SDM845
* Add QCS404 spmi regulators, ethernet, bluetooth, and uart3
* Remove remotely-controlled property as default for BAM on QCS404
* Add spmi regulators on PMS405
* Fixup QCS404 l3 voltages and regulator supply names
* Fixup thermal trip names on Qualcomm platforms
* Add thermal sensors on Qualcomm platforms
* Remove invalid efficiency property on MSM8998
* Change QCS404-evb compatible to help distinguish platforms
* Add rpmhd header file and convert to use definitions on SDM845
* Add interconnect header file on SDM845
* Add PMS405 ADC binding

----------------------------------------------------------------
Amit Kucheria (14):
      dt-bindings: iio: adc: Add binding for ADC on pms405 PMIC
      arm64: dts: msm8998: thermal: split address space into two
      arm64: dts: msm8998: efficiency is not valid property
      arm64: dts: msm8916: thermal: Add sensor for modem
      arm64: dts: msm8996: thermal: Add temperature sensors near major peripherals
      arm64: dts: msm8998: thermal: Fix the cpu sensor numbers
      arm64: dts: msm8998: thermal: Fix the gpu sensor number
      arm64: dts: msm8998: thermal: GPU has two sensors, add the second
      arm64: dts: msm8998: thermal: Add temperature sensors near major peripherals
      arm64: dts: sdm845: thermal: Add temperature sensors near major peripherals
      arm64: dts: msm8998: thermal: Make trip names consistent
      arm64: dts: msm8916: thermal: Make trip names consistent
      arm64: dts: msm8996: thermal: Make trip names consistent
      arm64: dts: msm8916: thermal: Convert camera trip type to hot

Andy Gross (1):
      Merge branch 'arm64-thermal-for-5.2' into arm64-for-5.2

Bjorn Andersson (6):
      arm64: dts: qcom: qcs404: Fix regulator supply names
      arm64: dts: qcom: qcs404: Fix voltages l3
      arm64: dts: qcom: qcs404-evb: Enable uart3 and add Bluetooth
      arm64: dts: qcom: sdm845: Update reserved memory map
      arm64: dts: qcom: sdm845: Define rmtfs memory
      arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes

Brian Masney (4):
      arm64: dts: qcom: pm8005: add gpio-ranges
      arm64: dts: qcom: pm8998: add gpio-ranges
      arm64: dts: qcom: pmi8994: add gpio-ranges
      arm64: dts: qcom: pmi8998: add gpio-ranges

Evan Green (1):
      arm64: dts: sdm845: Add UFS PHY reset

Georgi Djakov (1):
      arm64: dts: sdm845: Include the interconnect resources DT header

Jorge Ramirez-Ortiz (2):
      arm64: dts: qcom: pms405: add spmi regulators
      arm64: dts: qcom: qcs404-evb: add spmi regulators

Khasim Syed Mohammed (2):
      arm64: dts: qcom: qcs404: Remove default setting of controlled-remotely for BAM DMA
      arm64: dts: qcom: qcs404-evb: Change the compatible to distinguish platforms

Marc Gonzalez (5):
      dt-bindings: ufs: Add msm8998 compatible string
      arm64: dts: qcom: msm8998: Allow UFSHC driver to set-load
      arm64: dts: qcom: msm8998: Add UFS nodes
      arm64: dts: msm8998: Add UFS phy reset
      arm64: dts: qcom: msm8998: Fix blsp2_i2c5 address

Rajendra Nayak (1):
      arm64: dts: sdm845: Include rpmpd DT header

Vinod Koul (2):
      arm64: dts: qcom: qcs404: Add Ethernet node
      arm64: dts: qcom: qcs404: Enable ethernet for EVB-4000

 .../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt |   1 +
 .../devicetree/bindings/ufs/ufshcd-pltfrm.txt      |   1 +
 arch/arm64/boot/dts/qcom/msm8916.dtsi              |  41 ++-
 arch/arm64/boot/dts/qcom/msm8996.dtsi              | 174 +++++++++-
 arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi          |  22 ++
 arch/arm64/boot/dts/qcom/msm8998.dtsi              | 313 ++++++++++++++---
 arch/arm64/boot/dts/qcom/pm8005.dtsi               |   1 +
 arch/arm64/boot/dts/qcom/pm8998.dtsi               |   1 +
 arch/arm64/boot/dts/qcom/pmi8994.dtsi              |   1 +
 arch/arm64/boot/dts/qcom/pmi8998.dtsi              |   1 +
 arch/arm64/boot/dts/qcom/pms405.dtsi               |  11 +
 arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts       |   3 +-
 arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts       |  85 ++++-
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi           |  95 +++++-
 arch/arm64/boot/dts/qcom/qcs404.dtsi               |  23 +-
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts            |   8 +
 arch/arm64/boot/dts/qcom/sdm845.dtsi               | 371 ++++++++++++++++++++-
 17 files changed, 1042 insertions(+), 110 deletions(-)

Comments

Olof Johansson April 28, 2019, 7:52 p.m. UTC | #1
On Tue, Apr 23, 2019 at 12:27:25AM -0500, Andy Gross wrote:
> The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
> 
>   Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git tags/qcom-arm64-for-5.2
> 
> for you to fetch changes up to 6ef7c11b31a57e43062da15a36fac54fcb97b533:
> 
>   arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes (2019-04-23 00:10:35 -0500)
> 
> ----------------------------------------------------------------
> Qualcomm ARM64 Updates for v5.2
> 
> * Add gpio ranges for Qualcomm platforms
> * Fix MSM8998 BLSP2 I2C5 address
> * Add MSM8998 UFS nodes and associated information
> * Add SDM845 interconnect header and usage
> * Add ADSP and CDSP PAS, RMTFS memory, and UFS phy reset on SDM845
> * Update reserved memory map on SDM845
> * Add QCS404 spmi regulators, ethernet, bluetooth, and uart3
> * Remove remotely-controlled property as default for BAM on QCS404
> * Add spmi regulators on PMS405
> * Fixup QCS404 l3 voltages and regulator supply names
> * Fixup thermal trip names on Qualcomm platforms
> * Add thermal sensors on Qualcomm platforms
> * Remove invalid efficiency property on MSM8998
> * Change QCS404-evb compatible to help distinguish platforms
> * Add rpmhd header file and convert to use definitions on SDM845
> * Add interconnect header file on SDM845
> * Add PMS405 ADC binding

Merged, thanks.


-Olof