diff mbox series

[v2,4/7] dt-bindings: mfd: max77620: Add compatible for Maxim 77663

Message ID 20190422191350.27527-5-digetx@gmail.com
State Superseded, archived
Headers show
Series Add support for Maxim 77663 MFD | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Dmitry Osipenko April 22, 2019, 7:13 p.m. UTC 
Maxim 77663 has a few minor differences in regards to hardware interface
and available capabilities by comparing it with 77620 and 20024 models,
hence re-use 77620 device-tree binding for the 77663.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 Documentation/devicetree/bindings/mfd/max77620.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt
index 9c16d51cc15b..9058499051e0 100644
--- a/Documentation/devicetree/bindings/mfd/max77620.txt
+++ b/Documentation/devicetree/bindings/mfd/max77620.txt
@@ -4,7 +4,8 @@  Required properties:
 -------------------
 - compatible: Must be one of
 		"maxim,max77620"
-		"maxim,max20024".
+		"maxim,max20024"
+		"maxim,max77663".
 - reg: I2C device address.
 
 Optional properties:
@@ -105,6 +106,7 @@  Optional properties:
 Here supported time periods by device in microseconds are as follows:
 MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds.
 MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.
+MAX77663 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.
 
 -maxim,power-ok-control: configure map power ok bit
 			1: Enables POK(Power OK) to control nRST_IO and GPIO1