diff mbox series

[net,3/3] net/mlx5e: ethtool, Remove unsupported SFP EEPROM high pages query

Message ID 20190419210312.19338-4-saeedm@mellanox.com
State Accepted
Delegated to: David Miller
Headers show
Series [net,1/3] net/mlx5e: Fix use-after-free after xdp_return_frame | expand

Commit Message

Saeed Mahameed April 19, 2019, 9:03 p.m. UTC 
From: Erez Alfasi <ereza@mellanox.com>

Querying EEPROM high pages data for SFP module is currently
not supported by our driver and yet queried, resulting in
invalid FW queries.

Set the EEPROM ethtool data length to 256 for SFP module will
limit the reading for page 0 only and prevent invalid FW queries.

Fixes: bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM")
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 2 +-
 drivers/net/ethernet/mellanox/mlx5/core/port.c       | 4 ----
 2 files changed, 1 insertion(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 76a3d01a489e..78dc8fe2a83c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -1586,7 +1586,7 @@  static int mlx5e_get_module_info(struct net_device *netdev,
 		break;
 	case MLX5_MODULE_ID_SFP:
 		modinfo->type       = ETH_MODULE_SFF_8472;
-		modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+		modinfo->eeprom_len = MLX5_EEPROM_PAGE_LENGTH;
 		break;
 	default:
 		netdev_err(priv->netdev, "%s: cable type not recognized:0x%x\n",
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c
index 21b7f05b16a5..361468e0435d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -317,10 +317,6 @@  int mlx5_query_module_eeprom(struct mlx5_core_dev *dev,
 		size -= offset + size - MLX5_EEPROM_PAGE_LENGTH;
 
 	i2c_addr = MLX5_I2C_ADDR_LOW;
-	if (offset >= MLX5_EEPROM_PAGE_LENGTH) {
-		i2c_addr = MLX5_I2C_ADDR_HIGH;
-		offset -= MLX5_EEPROM_PAGE_LENGTH;
-	}
 
 	MLX5_SET(mcia_reg, in, l, 0);
 	MLX5_SET(mcia_reg, in, module, module_num);