diff mbox series

[v6,7/7] mtd: rawnand: AMD: Also use the last page for bad block markers

Message ID 20190417123631.22545-8-frieder.schrempf@kontron.de
State Accepted
Headers show
Series mtd: rawnand: Support bad block markers in first, second or last page | expand

Commit Message

Frieder Schrempf April 17, 2019, 12:36 p.m. UTC 
From: Frieder Schrempf <frieder.schrempf@kontron.de>

According to the datasheet of some Cypress SLC NANDs, the bad
block markers can be in the first, second or last page of a block.
So let's check all three locations.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/nand_amd.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/mtd/nand/raw/nand_amd.c b/drivers/mtd/nand/raw/nand_amd.c
index 1417559d3057..6217555c19a6 100644
--- a/drivers/mtd/nand/raw/nand_amd.c
+++ b/drivers/mtd/nand/raw/nand_amd.c
@@ -45,7 +45,13 @@  static void amd_nand_decode_id(struct nand_chip *chip)
 static int amd_nand_init(struct nand_chip *chip)
 {
 	if (nand_is_slc(chip))
-		chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
+		/*
+		 * According to the datasheet of some Cypress SLC NANDs,
+		 * the bad block markers can be in the first, second or last
+		 * page of a block. So let's check all three locations.
+		 */
+		chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE |
+				 NAND_BBM_LASTPAGE;
 
 	return 0;
 }