new file mode 100644
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/generic-ohci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB OHCI Controller Device Tree Bindings
+
+allOf:
+ - $ref: "usb-hcd.yaml"
+
+maintainers:
+ - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+properties:
+ compatible:
+ contains:
+ const: generic-ohci
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+ description: |
+ In case the Renesas R-Car Gen3 SoCs:
+ - if a host only channel: first clock should be host.
+ - if a USB DRD channel: first clock should be host and second
+ one should be peripheral
+
+ big-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Set this flag for HCDs with big endian descriptors and big
+ endian registers.
+
+ big-endian-desc:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Set this flag for HCDs with big endian descriptors.
+
+ big-endian-regs:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Set this flag for HCDs with big endian registers.
+
+ remote-wakeup-connected:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Remote wakeup is wired on the platform.
+
+ no-big-frame-no:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Set if frame_no lives in bits [15:0] of HCCA
+
+ num-ports:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Overrides the detected port count
+
+ phys: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ ohci0: usb@1c14400 {
+ compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+ reg = <0x01c14400 0x100>;
+ interrupts = <64>;
+ clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ phys = <&usbphy 1>;
+ };
+
+...
deleted file mode 100644
@@ -1,35 +0,0 @@
-USB OHCI controllers
-
-Required properties:
-- compatible : "generic-ohci"
-- reg : ohci controller register range (address and length)
-- interrupts : ohci controller interrupt
-
-Optional properties:
-- big-endian-regs : boolean, set this for hcds with big-endian registers
-- big-endian-desc : boolean, set this for hcds with big-endian descriptors
-- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
-- no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
-- remote-wakeup-connected: remote wakeup is wired on the platform
-- num-ports : u32, to override the detected port count
-- clocks : a list of phandle + clock specifier pairs. In case of Renesas
- R-Car Gen3 SoCs:
- - if a host only channel: first clock should be host.
- - if a USB DRD channel: first clock should be host and second one
- should be peripheral.
-- phys : see usb-hcd.txt in the current directory
-- resets : a list of phandle + reset specifier pairs
-
-additionally the properties from usb-hcd.txt (in the current directory) are
-supported.
-
-Example:
-
- ohci0: usb@1c14400 {
- compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
- reg = <0x01c14400 0x100>;
- interrupts = <64>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- };
The generic OHCI binding is used by many controllers that are using the OHCI spec. Convert that binding to a YAML description to enable the validation on all the nodes using that binding. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- Documentation/devicetree/bindings/usb/generic-ohci.yaml | 89 ++++++++++- Documentation/devicetree/bindings/usb/usb-ohci.txt | 35 +---- 2 files changed, 89 insertions(+), 35 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/generic-ohci.yaml delete mode 100644 Documentation/devicetree/bindings/usb/usb-ohci.txt