mbox series

[GIT,PULL,3/3] ARM: samsung: Changes for v5.2

Message ID 20190414154805.10188-3-krzk@kernel.org
State New
Headers show
Series [GIT,PULL,1/3] ARM: dts: exynos: Changes for v5.2 | expand

Pull-request

https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-soc-5.2

Message

Krzysztof Kozlowski April 14, 2019, 3:48 p.m. UTC
The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:

  Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-soc-5.2

for you to fetch changes up to 7676e667c841375b41d9438b559756141aa93d0e:

  ARM: s3c64xx: Tidy up handling of regulator GPIO lookups (2019-04-14 12:53:03 +0200)

----------------------------------------------------------------
Samsung mach/soc changes for v5.2

1. Cleanup in mach code.
2. Add necessary fixes for Suspend to RAM on Exynos5422 boards (tested
   with Odroid XU3/XU4/HC1 family).  Finally this brings a working S2R
   on these Odroid boards (still other drivers might have some issues
   but mach code seems to be finished).
3. Require MCPM for Exynos542x boards because otherwise not all of cores
   will come online.
4. GPIO regulator cleanup on S3C6410 Craig.

----------------------------------------------------------------
Charles Keepax (1):
      ARM: s3c64xx: Tidy up handling of regulator GPIO lookups

Joonyoung Shim (1):
      ARM: exynos: Add CPU state management for Exynos542x under secure firmware

Marek Szyprowski (5):
      ARM: exynos: Move Exynos542x CPU state reset to pm_prepare()
      ARM: exynos: Add Exynos SMC values for secure memory write
      ARM: exynos: Fix undefined instruction during Exynos5422 resume
      ARM: exynos: Fix infinite loops on CPU powerup failure
      ARM: exynos: Set MCPM as mandatory for Exynos542x/5800 SoCs

Wen Yang (1):
      ARM: exynos: Fix a leaked reference by adding missing of_node_put

 arch/arm/configs/exynos_defconfig            |  1 -
 arch/arm/configs/multi_v7_defconfig          |  1 -
 arch/arm/mach-exynos/Kconfig                 | 12 ++-----
 arch/arm/mach-exynos/Makefile                |  2 +-
 arch/arm/mach-exynos/common.h                |  1 +
 arch/arm/mach-exynos/exynos.c                |  3 ++
 arch/arm/mach-exynos/firmware.c              |  1 +
 arch/arm/mach-exynos/mcpm-exynos.c           | 13 +++++++-
 arch/arm/mach-exynos/platsmp.c               |  9 ++++-
 arch/arm/mach-exynos/smc.h                   |  7 ++++
 arch/arm/mach-exynos/suspend.c               | 49 ++++++++++++++++++++++++----
 arch/arm/mach-s3c64xx/mach-crag6410-module.c | 14 ++++++--
 12 files changed, 89 insertions(+), 24 deletions(-)

Comments

Olof Johansson April 29, 2019, 6:05 a.m. UTC | #1
On Sun, Apr 14, 2019 at 05:48:05PM +0200, Krzysztof Kozlowski wrote:
> 
> The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
> 
>   Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
> 
> are available in the Git repository at:
> 
>   https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-soc-5.2
> 
> for you to fetch changes up to 7676e667c841375b41d9438b559756141aa93d0e:
> 
>   ARM: s3c64xx: Tidy up handling of regulator GPIO lookups (2019-04-14 12:53:03 +0200)
> 
> ----------------------------------------------------------------
> Samsung mach/soc changes for v5.2
> 
> 1. Cleanup in mach code.
> 2. Add necessary fixes for Suspend to RAM on Exynos5422 boards (tested
>    with Odroid XU3/XU4/HC1 family).  Finally this brings a working S2R
>    on these Odroid boards (still other drivers might have some issues
>    but mach code seems to be finished).
> 3. Require MCPM for Exynos542x boards because otherwise not all of cores
>    will come online.
> 4. GPIO regulator cleanup on S3C6410 Craig.

Merged, thanks.


-Olof
Krzysztof Kozlowski April 29, 2019, 6:53 a.m. UTC | #2
On Sun, 14 Apr 2019 at 17:48, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
>
> The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
>
>   Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
>
> are available in the Git repository at:
>
>   https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-soc-5.2
>
> for you to fetch changes up to 7676e667c841375b41d9438b559756141aa93d0e:
>
>   ARM: s3c64xx: Tidy up handling of regulator GPIO lookups (2019-04-14 12:53:03 +0200)
>
> ----------------------------------------------------------------
> Samsung mach/soc changes for v5.2
>
> 1. Cleanup in mach code.
> 2. Add necessary fixes for Suspend to RAM on Exynos5422 boards (tested
>    with Odroid XU3/XU4/HC1 family).  Finally this brings a working S2R
>    on these Odroid boards (still other drivers might have some issues
>    but mach code seems to be finished).
> 3. Require MCPM for Exynos542x boards because otherwise not all of cores
>    will come online.
> 4. GPIO regulator cleanup on S3C6410 Craig.

Hi Olof and Arnd,

I see you pulled in DTS and DTS64 pull request. I think this one here
is still pending.

Best regards,
Krzysztof

>
> ----------------------------------------------------------------
> Charles Keepax (1):
>       ARM: s3c64xx: Tidy up handling of regulator GPIO lookups
>
> Joonyoung Shim (1):
>       ARM: exynos: Add CPU state management for Exynos542x under secure firmware
>
> Marek Szyprowski (5):
>       ARM: exynos: Move Exynos542x CPU state reset to pm_prepare()
>       ARM: exynos: Add Exynos SMC values for secure memory write
>       ARM: exynos: Fix undefined instruction during Exynos5422 resume
>       ARM: exynos: Fix infinite loops on CPU powerup failure
>       ARM: exynos: Set MCPM as mandatory for Exynos542x/5800 SoCs
>
> Wen Yang (1):
>       ARM: exynos: Fix a leaked reference by adding missing of_node_put
>
>  arch/arm/configs/exynos_defconfig            |  1 -
>  arch/arm/configs/multi_v7_defconfig          |  1 -
>  arch/arm/mach-exynos/Kconfig                 | 12 ++-----
>  arch/arm/mach-exynos/Makefile                |  2 +-
>  arch/arm/mach-exynos/common.h                |  1 +
>  arch/arm/mach-exynos/exynos.c                |  3 ++
>  arch/arm/mach-exynos/firmware.c              |  1 +
>  arch/arm/mach-exynos/mcpm-exynos.c           | 13 +++++++-
>  arch/arm/mach-exynos/platsmp.c               |  9 ++++-
>  arch/arm/mach-exynos/smc.h                   |  7 ++++
>  arch/arm/mach-exynos/suspend.c               | 49 ++++++++++++++++++++++++----
>  arch/arm/mach-s3c64xx/mach-crag6410-module.c | 14 ++++++--
>  12 files changed, 89 insertions(+), 24 deletions(-)
Olof Johansson April 29, 2019, 7:11 a.m. UTC | #3
On Sun, Apr 28, 2019 at 11:53 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On Sun, 14 Apr 2019 at 17:48, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> >
> >
> > The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
> >
> >   Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
> >
> > are available in the Git repository at:
> >
> >   https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-soc-5.2
> >
> > for you to fetch changes up to 7676e667c841375b41d9438b559756141aa93d0e:
> >
> >   ARM: s3c64xx: Tidy up handling of regulator GPIO lookups (2019-04-14 12:53:03 +0200)
> >
> > ----------------------------------------------------------------
> > Samsung mach/soc changes for v5.2
> >
> > 1. Cleanup in mach code.
> > 2. Add necessary fixes for Suspend to RAM on Exynos5422 boards (tested
> >    with Odroid XU3/XU4/HC1 family).  Finally this brings a working S2R
> >    on these Odroid boards (still other drivers might have some issues
> >    but mach code seems to be finished).
> > 3. Require MCPM for Exynos542x boards because otherwise not all of cores
> >    will come online.
> > 4. GPIO regulator cleanup on S3C6410 Craig.
>
> Hi Olof and Arnd,
>
> I see you pulled in DTS and DTS64 pull request. I think this one here
> is still pending.

Yeah, I don't always do them in order. It's easier to sweep all pull
requests of a certain type (i.e. DT, drivers, etc). I also ran out of
time and had to step away for a few hours.

Same thing now -- I'm done for the night but there's quite a few
remaining pull requests in the queue. I'll continue tomorrow.


-Olof