[1/1,T] igb: Fix WARN_ONCE on runtime suspend
diff mbox series

Message ID 20190411102620.9589-4-vicamo.yang@canonical.com
State New
Headers show
Series
  • igb: Fix WARN_ONCE on runtime suspend
Related show

Commit Message

You-Sheng Yang April 11, 2019, 10:26 a.m. UTC
From: Arvind Sankar <niveditas98@gmail.com>

BugLink: https://bugs.launchpad.net/bugs/1818490

The runtime_suspend device callbacks are not supposed to save
configuration state or change the power state. Commit fb29f76cc566
("igb: Fix an issue that PME is not enabled during runtime suspend")
changed the driver to not save configuration state during runtime
suspend, however the driver callback still put the device into a
low-power state. This causes a warning in the pci pm core and results in
pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend.

Fix this by not changing the power state either, leaving that to pci pm
core, and make the same change for suspend callback as well.

Also move a couple of defines into the appropriate header file instead
of inline in the .c file.

Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend")
Signed-off-by: Arvind Sankar <niveditas98@gmail.com>
Reviewed-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(backported from commit dabb8338be533c18f50255cf39ff4f66d4dabdbe)
Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com>
---
 .../net/ethernet/intel/igb/e1000_defines.h    |  2 +
 drivers/net/ethernet/intel/igb/igb_main.c     | 55 +++----------------
 2 files changed, 10 insertions(+), 47 deletions(-)

Patch
diff mbox series

diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 956c4c3ae70b1..183ae8cffa01b 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -193,6 +193,8 @@ 
 /* enable link status from external LINK_0 and LINK_1 pins */
 #define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */
 #define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */
+#define E1000_CTRL_ADVD3WUC 0x00100000  /* D3 WUC */
+#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 /* PHY PM enable */
 #define E1000_CTRL_SWDPIO0  0x00400000  /* SWDPIN 0 Input or output */
 #define E1000_CTRL_RST      0x04000000  /* Global reset */
 #define E1000_CTRL_RFCE     0x08000000  /* Receive Flow Control enable */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index c775c2e29cc30..f76a384523c3b 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -7090,9 +7090,7 @@  static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 	struct e1000_hw *hw = &adapter->hw;
 	u32 ctrl, rctl, status;
 	u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
-#ifdef CONFIG_PM
-	int retval = 0;
-#endif
+	bool wake;
 
 	netif_device_detach(netdev);
 
@@ -7101,12 +7099,6 @@  static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 
 	igb_clear_interrupt_scheme(adapter);
 
-#ifdef CONFIG_PM
-	retval = pci_save_state(pdev);
-	if (retval)
-		return retval;
-#endif
-
 	status = rd32(E1000_STATUS);
 	if (status & E1000_STATUS_LU)
 		wufc &= ~E1000_WUFC_LNKC;
@@ -7123,10 +7115,6 @@  static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 		}
 
 		ctrl = rd32(E1000_CTRL);
-		/* advertise wake from D3Cold */
-		#define E1000_CTRL_ADVD3WUC 0x00100000
-		/* phy power management enable */
-		#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
 		ctrl |= E1000_CTRL_ADVD3WUC;
 		wr32(E1000_CTRL, ctrl);
 
@@ -7140,12 +7128,15 @@  static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 		wr32(E1000_WUFC, 0);
 	}
 
-	*enable_wake = wufc || adapter->en_mng_pt;
-	if (!*enable_wake)
+	wake = wufc || adapter->en_mng_pt;
+	if (!wake)
 		igb_power_down_link(adapter);
 	else
 		igb_power_up_link(adapter);
 
+	if (enable_wake)
+		*enable_wake = wake;
+
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant.
 	 */
@@ -7160,22 +7151,7 @@  static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 #ifdef CONFIG_PM_SLEEP
 static int igb_suspend(struct device *dev)
 {
-	int retval;
-	bool wake;
-	struct pci_dev *pdev = to_pci_dev(dev);
-
-	retval = __igb_shutdown(pdev, &wake, 0);
-	if (retval)
-		return retval;
-
-	if (wake) {
-		pci_prepare_to_sleep(pdev);
-	} else {
-		pci_wake_from_d3(pdev, false);
-		pci_set_power_state(pdev, PCI_D3hot);
-	}
-
-	return 0;
+	return __igb_shutdown(to_pci_dev(dev), NULL, 0);
 }
 #endif /* CONFIG_PM_SLEEP */
 
@@ -7243,22 +7219,7 @@  static int igb_runtime_idle(struct device *dev)
 
 static int igb_runtime_suspend(struct device *dev)
 {
-	struct pci_dev *pdev = to_pci_dev(dev);
-	int retval;
-	bool wake;
-
-	retval = __igb_shutdown(pdev, &wake, 1);
-	if (retval)
-		return retval;
-
-	if (wake) {
-		pci_prepare_to_sleep(pdev);
-	} else {
-		pci_wake_from_d3(pdev, false);
-		pci_set_power_state(pdev, PCI_D3hot);
-	}
-
-	return 0;
+	return __igb_shutdown(to_pci_dev(dev), NULL, 1);
 }
 
 static int igb_runtime_resume(struct device *dev)