@@ -238,6 +238,18 @@ ad_select
This option was added in bonding version 3.4.0.
+all_slaves_active
+
+ Specifies that duplicate frames (received on inactive ports) should be
+ dropped (0) or delivered (1).
+
+ Normally, bonding will drop duplicate frames (received on inactive
+ ports), which is desirable for most users. But there are some times
+ it is nice to allow duplicate frames to be delivered.
+
+ The default value is 0 (drop duplicate frames received on inactive
+ ports).
+
arp_interval
Specifies the ARP link monitoring frequency in milliseconds.
@@ -433,6 +445,18 @@ miimon
determined. See the High Availability section for additional
information. The default value is 0.
+min_links
+
+ Specifies the minimum number of links that must be active before
+ asserting carrier. It is similar to the Cisco EtherChannel min-links
+ feature. This allows setting the minimum number of member ports that
+ must be up (link-up state) before marking the bond device as up
+ (carrier on). This is useful for situations where higher level services
+ such as clustering want to ensure a minimum number of low bandwidth
+ links are active before switchover. The default value is 1.
+
+ This option only affect 802.3ad mode.
+
mode
Specifies one of the bonding policies. The default is
Commit 655f8919d549ad1872e24d826b6ce42530516d2e bonding: add min links parameter to 802.3ad and commit ebd8e4977a87cb81d93c62a9bff0102a9713722f bonding: add all_slaves_active parameter introduced new options to bonding, but didn't provide the documentation for those options. V2 : add the default value for both options. Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> --- Documentation/networking/bonding.txt | 24 ++++++++++++++++++++++++ 1 files changed, 24 insertions(+), 0 deletions(-)