[v2] pinctrl: pinctrl-imx8mq: Add suspend/resume ops
diff mbox series

Message ID 1554720120-6617-1-git-send-email-abel.vesa@nxp.com
State New
Headers show
Series
  • [v2] pinctrl: pinctrl-imx8mq: Add suspend/resume ops
Related show

Commit Message

Abel Vesa April 8, 2019, 10:42 a.m. UTC
To support pinctl hog restore after LPSR resume back,
add the generic suspend/resume in pinctrl-imx along with the
generic pm opsto be used by platform specific drivers. Then
make use of the newly added ops in i.MX8MQ platform specific
driver.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
---

Changes since v1:
 - Replaced the imx8mq specific ops with generic ones.

 drivers/pinctrl/freescale/pinctrl-imx.c    | 25 +++++++++++++++++++++++++
 drivers/pinctrl/freescale/pinctrl-imx.h    |  4 ++++
 drivers/pinctrl/freescale/pinctrl-imx8mq.c |  1 +
 3 files changed, 30 insertions(+)

Comments

Dong Aisheng April 8, 2019, 11:27 a.m. UTC | #1
> From: Abel Vesa
> Sent: Monday, April 8, 2019 6:43 PM
> Subject: [PATCH v2] pinctrl: pinctrl-imx8mq: Add suspend/resume ops

pinctrl: imx8mq: xxxx

> To support pinctl hog restore after LPSR resume back, add the generic
> suspend/resume in pinctrl-imx along with the generic pm opsto be used by
> platform specific drivers. Then make use of the newly added ops in i.MX8MQ
> platform specific driver.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
> ---
> 
> Changes since v1:
>  - Replaced the imx8mq specific ops with generic ones.
> 
>  drivers/pinctrl/freescale/pinctrl-imx.c    | 25
> +++++++++++++++++++++++++
>  drivers/pinctrl/freescale/pinctrl-imx.h    |  4 ++++
>  drivers/pinctrl/freescale/pinctrl-imx8mq.c |  1 +
>  3 files changed, 30 insertions(+)
> 
> diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c
> b/drivers/pinctrl/freescale/pinctrl-imx.c
> index 188001b..ee120ee 100644
> --- a/drivers/pinctrl/freescale/pinctrl-imx.c
> +++ b/drivers/pinctrl/freescale/pinctrl-imx.c
> @@ -887,3 +887,28 @@ int imx_pinctrl_probe(struct platform_device *pdev,
> 
>  	return ret;
>  }
> +
> +int imx_pinctrl_suspend(struct device *dev) {

Static __maybe_unused

> +	struct imx_pinctrl *ipctl = dev_get_drvdata(dev);
> +
> +	if (!ipctl)
> +		return -EINVAL;

I think we do not need this check as it's within the driver control.

> +
> +	return pinctrl_force_sleep(ipctl->pctl); }
> +
> +int imx_pinctrl_resume(struct device *dev) {

Ditto

> +	struct imx_pinctrl *ipctl = dev_get_drvdata(dev);
> +
> +	if (!ipctl)
> +		return -EINVAL;

Ditto

> +
> +	return pinctrl_force_default(ipctl->pctl);
> +}
> +
> +const struct dev_pm_ops imx_pinctrl_pm_ops = {
> +	SET_LATE_SYSTEM_SLEEP_PM_OPS(imx_pinctrl_suspend,
> +					imx_pinctrl_resume)
> +};
> diff --git a/drivers/pinctrl/freescale/pinctrl-imx.h
> b/drivers/pinctrl/freescale/pinctrl-imx.h
> index 98a4889..ae78314 100644
> --- a/drivers/pinctrl/freescale/pinctrl-imx.h
> +++ b/drivers/pinctrl/freescale/pinctrl-imx.h
> @@ -17,6 +17,7 @@
>  struct platform_device;
> 
>  extern struct pinmux_ops imx_pmx_ops;
> +extern const struct dev_pm_ops imx_pinctrl_pm_ops;
> 
>  /**
>   * struct imx_pin_mmio - MMIO pin configurations @@ -136,6 +137,9 @@
> struct imx_pinctrl {  int imx_pinctrl_probe(struct platform_device *pdev,
>  			const struct imx_pinctrl_soc_info *info);
> 
> +int imx_pinctrl_suspend(struct device *dev); int
> +imx_pinctrl_resume(struct device *dev);

Not need export this two functions

Regards
Dong Aisheng

> +
>  #ifdef CONFIG_PINCTRL_IMX_SCU
>  #define BM_PAD_CTL_GP_ENABLE		BIT(30)
>  #define BM_PAD_CTL_IFMUX_ENABLE		BIT(31)
> diff --git a/drivers/pinctrl/freescale/pinctrl-imx8mq.c
> b/drivers/pinctrl/freescale/pinctrl-imx8mq.c
> index 8d39af5..50aa1c0 100644
> --- a/drivers/pinctrl/freescale/pinctrl-imx8mq.c
> +++ b/drivers/pinctrl/freescale/pinctrl-imx8mq.c
> @@ -339,6 +339,7 @@ static struct platform_driver imx8mq_pinctrl_driver =
> {
>  	.driver = {
>  		.name = "imx8mq-pinctrl",
>  		.of_match_table = of_match_ptr(imx8mq_pinctrl_of_match),
> +		.pm = &imx_pinctrl_pm_ops,
>  		.suppress_bind_attrs = true,
>  	},
>  	.probe = imx8mq_pinctrl_probe,
> --
> 2.7.4

Patch
diff mbox series

diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
index 188001b..ee120ee 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx.c
@@ -887,3 +887,28 @@  int imx_pinctrl_probe(struct platform_device *pdev,
 
 	return ret;
 }
+
+int imx_pinctrl_suspend(struct device *dev)
+{
+	struct imx_pinctrl *ipctl = dev_get_drvdata(dev);
+
+	if (!ipctl)
+		return -EINVAL;
+
+	return pinctrl_force_sleep(ipctl->pctl);
+}
+
+int imx_pinctrl_resume(struct device *dev)
+{
+	struct imx_pinctrl *ipctl = dev_get_drvdata(dev);
+
+	if (!ipctl)
+		return -EINVAL;
+
+	return pinctrl_force_default(ipctl->pctl);
+}
+
+const struct dev_pm_ops imx_pinctrl_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(imx_pinctrl_suspend,
+					imx_pinctrl_resume)
+};
diff --git a/drivers/pinctrl/freescale/pinctrl-imx.h b/drivers/pinctrl/freescale/pinctrl-imx.h
index 98a4889..ae78314 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.h
+++ b/drivers/pinctrl/freescale/pinctrl-imx.h
@@ -17,6 +17,7 @@ 
 struct platform_device;
 
 extern struct pinmux_ops imx_pmx_ops;
+extern const struct dev_pm_ops imx_pinctrl_pm_ops;
 
 /**
  * struct imx_pin_mmio - MMIO pin configurations
@@ -136,6 +137,9 @@  struct imx_pinctrl {
 int imx_pinctrl_probe(struct platform_device *pdev,
 			const struct imx_pinctrl_soc_info *info);
 
+int imx_pinctrl_suspend(struct device *dev);
+int imx_pinctrl_resume(struct device *dev);
+
 #ifdef CONFIG_PINCTRL_IMX_SCU
 #define BM_PAD_CTL_GP_ENABLE		BIT(30)
 #define BM_PAD_CTL_IFMUX_ENABLE		BIT(31)
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8mq.c b/drivers/pinctrl/freescale/pinctrl-imx8mq.c
index 8d39af5..50aa1c0 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8mq.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8mq.c
@@ -339,6 +339,7 @@  static struct platform_driver imx8mq_pinctrl_driver = {
 	.driver = {
 		.name = "imx8mq-pinctrl",
 		.of_match_table = of_match_ptr(imx8mq_pinctrl_of_match),
+		.pm = &imx_pinctrl_pm_ops,
 		.suppress_bind_attrs = true,
 	},
 	.probe = imx8mq_pinctrl_probe,