diff mbox

[net,01/10] bnx2x: Fix missing pause on for 578xx

Message ID 1312361950.21665.91.camel@lb-tlvb-dmitry.il.broadcom.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Yaniv Rosner Aug. 3, 2011, 8:59 a.m. UTC 
When link speed is 1G and below, pause weren't sent due to missing pause setting in the UMAC.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
 drivers/net/bnx2x/bnx2x_link.c |    6 ++++++
 drivers/net/bnx2x/bnx2x_reg.h  |    2 ++
 2 files changed, 8 insertions(+), 0 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index bcd8f00..aa9958e 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -1546,6 +1546,12 @@  static void bnx2x_umac_enable(struct link_params *params,
 			       vars->line_speed);
 		break;
 	}
+	if (!(vars->flow_ctrl & BNX2X_FLOW_CTRL_TX))
+		val |= UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE;
+
+	if (!(vars->flow_ctrl & BNX2X_FLOW_CTRL_RX))
+		val |= UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE;
+
 	REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val);
 	udelay(50);
 
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 02461fe..d84642a 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -4771,9 +4771,11 @@ 
    The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] -
    header pointer. */
 #define UCM_REG_XX_TABLE					 0xe0300
+#define UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE			 (0x1<<28)
 #define UMAC_COMMAND_CONFIG_REG_LOOP_ENA			 (0x1<<15)
 #define UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK			 (0x1<<24)
 #define UMAC_COMMAND_CONFIG_REG_PAD_EN				 (0x1<<5)
+#define UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE			 (0x1<<8)
 #define UMAC_COMMAND_CONFIG_REG_PROMIS_EN			 (0x1<<4)
 #define UMAC_COMMAND_CONFIG_REG_RX_ENA				 (0x1<<1)
 #define UMAC_COMMAND_CONFIG_REG_SW_RESET			 (0x1<<13)